Category: Target & Partner by Husqvarna

7235 Target by Husqvarna Barracuda Multi-Application Dry Blade by

7235 Target by Husqvarna Barracuda Multi-Application Dry Blade
Check Price for 7235 Target by Husqvarna Barracuda Multi-Application Dry Blade

Target by Husqvarna Barracuda Series Features

  • The Barracuda is for fast, smooth cuts on almost any masonry, tile, stone or hard concrete material.
  • It is not recommended for abrasive materials like block and asphalt.
  • Barracuda has a continuous castellated turbo rim.
  • Cutting type: Wet Or dry cutting
  • Horsepower Range: 1-1/2 – 6 hp
  • Equipment types: Tile Saw, Circular Saw, Green Concrete Saw, Mini Grinder, Right Angle Grinder
  • Bonding/Weld type: Laser weld
  • Diamond depth 0.390
  • 4″, 4-1/2″ & 5″ blades have a: 7/8 / 20mm / 5/8 arbors
  • 7″, 8″ & 10″ blades have a: DM / 7/8 / 5/8 arbors

.

6815 Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump by

6815 Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump
Check Price for 6815 Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump

Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump

  • Free shipping from Factory warehouse
    • Weighs 105 lbs (57 kg)
    • Combo Base, vacuum pump not included.
    • Combo base w/ vacuum assy. see item no.6815.
    • 1″ to 10″ bit capacity standard. up to 14″ with two spacers
    • 42″ long, 2-1/2″ square column, reduces flex
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Slide handle permits drilling in tight areas
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Sliding feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Vacuum Features

    • Heavy-Duty, pliable rubber gasket
    • Quiet, 4 Amp diaphragm pump
    • Mount bracket holds vacuum pump to machine base
    • Water trap shut-off protects motor
    • Vacuum gauge and release petcock valve

    Motors

    • Milwaukee 4090 – 15A 375/750 Rpm, 5″ to 8″ recommended bit size
    • Milwaukee 4004 – 20A Slip Clutch, 4500/900 Rpm, 6″ to 10″ recommended bit size
    • Milwaukee 4004 – 20A Slip Clutch, 300/600 Rpm, 9″ to 14″ recommended bit size

    Combo Base Size

    • 5″ (127mm) wheels; 6″ x 11″ (152mm x 279mm) cast alumium; 4 levelling screws, slot for anchor system.

    Column Size

    • 2-1/2″ (64mm) square, 42″ (1,067mm) long, gear rack welded to column.

    .

    6820 Husqvarna DS 700 Core Drill Combo Base by

    6820 Husqvarna DS 700 Core Drill Combo Base
    Check Price for 6820 Husqvarna DS 700 Core Drill Combo Base

    Husqvarna DS 700 Core Drill Features

  • Free shipping from Factory warehouse
    • Weighs 105 lbs (57 kg)
    • Combo Base, vacuum pump not included.
    • Combo base w/ vacuum assy. see item no.6815.
    • 1″ to 10″ bit capacity standard. up to 14″ with two spacers
    • 42″ long, 2-1/2″ square column, reduces flex
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Slide handle permits drilling in tight areas
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Sliding feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Motors

    • Milwaukee 4090 – 15A 375/750 Rpm, 5″ to 8″ bit size
    • Milwaukee 4096 – 20A Clutch, 4500/900 Rpm, 6″ to 10″ bit size
    • Milwaukee 4004 – 20A Clutch, 300/600 Rpm, 9″ to 14″ bit size

    Combo Base Size

    • 5″ (127mm) wheels; 6″ x 11″ (152mm x 279mm) cast aluminum; 4 leveling screws, slot for anchor system.

    Column Size

    • 2-1/2″ (64mm) square, 42″ (1,067mm) long, gear rack welded to column.

    .

    6810 Husqvarna DS 800 Core Drill W/ Anchor Base by

    6810 Husqvarna DS 800 Core Drill W/ Anchor Base
    Check Price for 6810 Husqvarna DS 800 Core Drill W/ Anchor Base

    Husqvarna DS 800 Core Drill Features

  • Free shipping from factory warehouse
    • Weighs 110 lbs
    • Drill holes up to 16″ (extra spacer required)
    • 1″ to 14″ bit capacity standard
    • 42″ long, precision ground and plated 2-7/8″ square column reduces flex for more accurate drilling
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Gear track is welded to the column
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Four-spoke feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Motors

    • Cardi D3-250S – 20A, 420/860 RPM
    • Milwaukee 4004 – 20A Slip Clutch, 300/600 RPM

    .

    6920 Husqvarna K3000 Electric Cut Off Saw by

    6920 Husqvarna K3000 Electric Cut Off Saw
    Check Price for 6920 Husqvarna K3000 Electric Cut Off Saw

    Partner by Husqvarna K3000 Electric Power Cutter

  • Free shipping from factory warehouse
  • Blade not included
  • General Info

    The Husqvarna K3000 Electric is one of the world’s most powerful and versatile electric saws. This machine offers new alternatives for cutting outside as well as inside. With it’s powerful motor (2.7 hp), ergonomic design and deep cutting capacity, it’s the best in its class. The K3000 Electric is not an angle grinder, it is a concrete saw from the ground up.

    • High power, a big 1800 w (120 v)
    • Capacity for 14″ cutting blade (5″ cutting depth)
    • Forward rotation reduces the risk of jamming and kickback
    • Good distance between handles for safe control and reduced load
    • Front handle that facilitates both vertical and horizontal cutting
    • Comfortable patented design of the rear handle makes your job easier
    • Elguard’, the advanced electronic overload protection, warns you by pulsating the rpms when you’re approaching overload
    • Well-dimensioned bevel gear brings high durability, minimal power loss and low noise level
    • SoftStart , this feature gives the saw a gradual start when the trigger is pulled. This makes it so the saw does not initially jump to full power. This feature gives the operator more control
    • Pulling rotation reduces the risk of jamming and kickback.

    Elgard the advanced electronic overload protection varies the rotation speed to warn of approaching overload.
    Electronic soft start.

    Quick locking of the spindle and large outlet in the blade guard simplify blade changes.

    .

    6805 Husqvarna DS 800 Core Drill W/ Combo Vacuum Base by

    6805 Husqvarna DS 800 Core Drill W/ Combo Vacuum Base
    Check Price for 6805 Husqvarna DS 800 Core Drill W/ Combo Vacuum Base

    Husqvarna DS 800 Core Drill, Combo Vacuum Base

  • Free shipping from Factory warehouse
    • Weighs 110 lbs
    • Drill holes up to 16″ (extra spacer required)
    • 1″ to 14″ bit capacity standard
    • 42″ long, precision ground and plated 2-7/8″ square column reduces flex for more accurate drilling
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Gear track is welded to the column
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Four-spoke feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Vacuum Features

    • Heavy-Duty, pliable rubber gasket
    • Quiet, 4 Amp diaphragm pump
    • Mount bracket holds vacuum pump to machine base
    • Water trap shut-off protects motor
    • Vacuum gauge and release petcock valve

    Motors

    • Milwaukee 4096 – 20A Clutch, 4500/900 Rpm, Recommended bit siz 6″ to 10″
    • Milwaukee 4004 – 20A Clutch, 300/600 Rpm, Recommended bit size 9″ to 14″

    .

    6802 Husqvarna Banner Line Core Bits by

    6802 Husqvarna Banner Line Core Bits
    Check Price for 6802 Husqvarna Banner Line Core Bits

    Husqvarna Banner Line Bits

    General Purpose, Concrete and Masonry.

    • For general purpose wet drilling of concrete, masonry and brick, including concrete with soft to hard aggregate and light to medium steel reinforcing.
    • Also effective on granite, marble and stone.
    • 14″ drilling depth
    • Total segment height: .300″ (.200″ diamond depth; .100″ segment base)
    • 3/4″, 1″, 1-1/2″ have 5/8″-11 arbor.
    • All other sizes have 1-1/4″-7 arbor.

    .

    Recent Entries »