Best Door Tools Store

Separating Blade Tile Shaper Ring Saw

Taurus 3 Blades

• Separating Blade
• For internal cuts, omni-directional.
• The separating blade is the same size as the Standard blade and has exactly the same cutting action.
• The difference is that the Separating Blade is made from a stainless steel wire that is coated with the same high quality process as all our blades and then has a coupling attached to it which is also coated for protection and smooth action.
• This blade gives you the ability to open the blade, slide it through, reattach and make internal cuts with no entry point.
• All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials.
• All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn.
• Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.

  .

Gemini Taurus 3 Tile Shaper T3 Original Blade

• Original replacement part for the Gemini Tile Shaper & Taurus 2 & Taurus 3

Taurus 3 Blades

• 1) All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials.
• All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn.
• Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.

.

Diamond replacement blade for the TileShaper, and Taurus 2 & 3 models.

Taurus 3 Blades

Standard Blade Features

• For general use, Omni-directional. The Standard blade gives you strength as well as versatility in all materials.
• Because the blade is round you have the ability to cut in any direction. The 360 degree diamond coating allows the blade to cut quickly while grinding the edge, leaving it smooth.
• All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan, and anything that has a similar density to these materials.
• All blades use the same belt and grommets. Blades are interchangeable with the same belt and grommets and do not need to be changed unless they are excessively worn.
• Always let the blade do the cutting. Forcing the blade through the material in a hurry will not only cause a slower cut but can also shorten the blade life. There is an optimum speed for each blade in each material; you can feel it while you are cutting. Sensitivity to this causes extremely long blade life Defined it is that point at which you get maximum cutting speed for minimal pressure.

.

Replacement mega blade with rollers for Gemini Tile Shaper (Taurus 3)

• For dense materials. Because of its “tear drop” shape, the Mega Blade is our strongest blade ever. To date, no one has been able to break one.
• This blade is used differently than our Omni-directional blades. It is cuts mainly on the front and back, so to create a curve you will guide the material around the blade.
• The Mega blade is so rigid that it has the ability to damage the saw itself if used improperly by pushing too hard.
• So keep in mind the “golden rule” to let the saw do the cutting and do not force the material.
• All blades cut the same materials: glass, tile, stone, shell, nonferrous metals, hard plastics such as acrylic and lexan

.