Category: Core Cut by Diamond Products

7900 Core Cut CC1000 Green Concrete Saw by

7900 Core Cut CC1000 Green Concrete Saw
Check Price for 7900 Core Cut CC1000 Green Concrete Saw

Core Cut CC1000 Green Concrete Saw

  • Center cut design, better tracking into an existing cut and easy to keep the cut straight
  • Light weight and portable
  • 8″ blade capacity
  • Cutting depth up to 2-1/4″
  • Up-cut design for a cleaner cut
  • Dust diverted keeps the saw line visible
  • Cyclone air cleaner for increased engine longevity
  • Power transmission to blade drive is via 2 molded notch 3VX premium belts
  • Adjustable blade alignment
  • Call For Freight Charge

    .

9209 Core Cut CC3700 Concrete Saw by

9209 Core Cut CC3700 Concrete Saw
Check Price for 9209 Core Cut CC3700 Concrete Saw

Most compact 65 hp saw on the market

  • Fits through a 30″ door.
  • 14″ through 36″ blade capacity.
  • One hand sawing control.
  • Forward-positioned motor for more weight at the blade.
  • Powerful 65 hp Wisconsin gas engine (also available with 30 hp Deutz diesel engine).
  • Sundstrand-Sauer transmissions standard, Eaton model 10 also available, call to inquire.
  • Compact frame designed for the higher torque of a large horsepower engine.
  • Available with Lincoln electric 30 hp & 40 hp 460V 3 phase (motor starter switch-box included) or 65 hp Wisconsin gas or 25 hp Lesson 230V 1 phase electric engine.
  • 14″ to 36″ maximum blade capacity.
  • 14-3/4″ maximum cutting depth (36″ blade).
  • 1-3/4″ diameter blade shaft with self-aligning bearings.
  • Strongest frame on the market.
  • Left or right hand sawing.
  • Large 6 gallons fuel capacity for longer sawing.
  • Raise/lower powered by electro-hydraulic pump.
  • Telescopic front pointer.
  • High temperature shut-off standard.
  • Electric models includes motor starter switch-box with amp meter.
  • Electric start standard
  • Quick disconnect blade flanges.
  • 6 or 8 belts drive shaft.
  • Slip-on blade guards through 30″, 36″ is bolt-on
  • Call For Freight Charge

    CC3700 14″ Guard 20″ Guard 26″ Guard 30″ Guard 36″ Guard
    Horsepower 25hp/30hp Electric
    65hp Gas
    25hp/30hp/ 40hp Electric
    65hp Gas
    25hp/30hp/ 40hp Electric
    65hp Gas
    25hp/30hp/ 40hp Electric
    65hp Gas
    25hp/30hp/ 40hp Electric
    65hp Gas
    Arbor 1 in. 1 in. 1 in. 1 in. 1 in.
    Depth of Cut 4-5/8″ 7-5/8″ 10-5/8″ 11-3/4″ 12-3/4″
    Blade Guard Cap. 14″ 20″ 26″ 30″ 36″
    Blade Shaft RPM 2,900 2,450 1,950 1,650 1,400

.

9205 Core Cut CC2500 Accessories by

9205 Core Cut CC2500 Accessories
Check Price for 9205 Core Cut CC2500 Accessories
  • Water safety switch, not available on electric saw models or hydraulic saw models without power raise/lower assembly.
  • Spot light.
  • Water pump (electric)
  • Extended blade shaft kit, up to 3/4″ to 1-1/2″ & 1-1/2″ to 2-1/4″ spacing
  • Electric or hydraulic raise/lower assembly includes battery and alternator.
  • Propane Conversion Kit for 20hp Honda (4.7 gallon tank)
  • Propane Conversion Kit for 24hp Honda (4.7 gallon tank)
  • Propane conversion kit includes: Conversion to dual fuel, safety fuel lock, liquid propane fuel tank with fuel gauge and safety check connector
  • Blade Guard 14″
  • Blade Guard 20″
  • Blade Guard 26″
  • Propane kits and Raise lower assembly have an additional freight charge.
  • .

    9208 Core Cut CC3500 Accessories by

    9208 Core Cut CC3500 Accessories
    Check Price for 9208 Core Cut CC3500 Accessories

    Core Cut CC3500 Accessories

    • Water safety switch.
    • Spot light.
    • Vertical muffler.
    • Water pump (electric diaphragm).
    • Blade stacking kit, up to 1-1/2″, 2″ and 4″ spacing, for 20″ maximum blade guard capacity.
    • Parking brake
    • Soft start controller factory add-on, electric saws only
    • Propane Conversion Kit for 35hp Wisconsin (8.0 gallon tank)
    • Propane conversion kit includes: Conversion to dual fuel, safety fuel lock, liquid propane fuel tank with fuel gauge and safety check connector, propane kits have an additional freight charge
    • Lowering speed metering valve.
    • Shaft tachometer.
    • Extra Slip-on blade guard 14″, 20″, 26″ & 30″ available
    • .

    9204 Core Cut CC2500 Self-Propelled Concrete Saws by

    9204 Core Cut CC2500 Self-Propelled Concrete Saws
    Check Price for 9204 Core Cut CC2500 Self-Propelled Concrete Saws

    Self-propelled hydrostatic transmission.

    • Available with Lesson electric 15hp 220V 1 phase or 20hp/24hp/27hp gas or 25hp hydraulic engine.
    • 14″ to 26″ maximum blade capacity
    • 10-3/8″ maximum cutting depth (26″ blade)
    • 1-1/2″ diameter bladeshaft with bearings that are greaseable from top of the frame.
    • Rigid high strength 3/16″ steel box frame with heavy bar reinforcement.
    • Left or right hand sawing
    • Large 5 gallons fuel capacity for longer sawing.
    • Precision screw feed raise and lower system
    • Blade drive is via 5 belts on 27hp Kohler. 25hp or bellow have 4 belts.
    • Hydraulic model input flow 25 GPM @2000 PSI maximum
    • Electric models includes motor starter switch-box with amp meter.
    • Electric start standard
    • Quick disconnect blade flanges.
    • Call For Freight Charge

    CC2500 Self-Propelled 14″ Guard 20″ Guard 26″ Guard
    Horsepower 15hp Electric
    20hp/24hp/25hp Gas
    25hp Hydraulic
    15hp Electric
    20hp/24hp/25hp Gas
    25hp Hydraulic
    15hp Electric
    20hp/24hp/25hp Gas
    25hp Hydraulic
    Saw Length 47-1/2″ 47-1/2″ 47-1/2″
    Arbor 1 i.n. 1 i.n. 1 i.n.
    Depth of Cut 4-3/8″ 7-3/8″ 10-3/8″
    Blade Guard Cap. 14″ 20″ 26″
    Blade Shaft RPM 2,625 2,625 2,025

    .

    9202 Core Cut CC1300XL Accessories by

    9202 Core Cut CC1300XL Accessories
    Check Price for 9202 Core Cut CC1300XL Accessories
  • 5 Gallon water tank kit (includes 5 gallon tank, petcock, hose, coupler and bungee style tie-down)
  • Water tank not available for electric saw models
  • Extended blade shaft kit, up to 1″ spacing
  • Propane Conversion Kit for 9 hp Honda (4.7 gallon tank)*
  • Propane Conversion Kit for 13 hp Honda (4.7 gallon tank)
  • Propane conversion kit includes: Conversion to dual fuel, safety fuel lock, liquid propane fuel tank with fuel gauge and safety check connector
  • Extra Slip-On Blade Guard 14″
  • Extra Slip-On Blade Guard 18″
  • Extra Slip-On Blade Guard 20″
  • .

    9203 Core Cut CC1800 Accessories by

    9203 Core Cut CC1800 Accessories
    Check Price for 9203 Core Cut CC1800 Accessories
  • 5 Gallon Water Tank Kit (includes 5 gallon tank, petcock, hose, coupler and bungee style tie-down)
  • Water tank not available for electric saw models
  • Frame lift standard on all electric saws and 20hp models
  • Weight kit 26 lbs, standard on all saws with 20″ blade and on all saws over 15 hp
  • Tack/Hour meter display engine RPM standard on 20 hp models
  • Extended blade shaft kit, up to 1″ spacing
  • Propane Conversion Kit for 13 hp Honda (4.7 gallon tank)*
  • Propane Conversion Kit for 20 hp Honda (4.7 gallon tank)
  • Propane conversion kit includes: Conversion to dual fuel, safety fuel lock, liquid propane fuel tank with fuel gauge and safety check connector
  • Extra Slip-On Blade Guard 14″
  • Extra Slip-On Blade Guard 20″
  • Bolt-On Blade Guard 14″
  • Bolt-On Blade Guard 20″
  • Propane kits and weight kits have an additional freight charge.
  • .

    9200 Core Cut CC1800 Push Concrete Saw by

    9200 Core Cut CC1800 Push Concrete Saw
    Check Price for 9200 Core Cut CC1800 Push Concrete Saw

    Large saw features in a portable saw.

    • Available with Baldor electric 7.5hp 220V 1 phase or 13 hp/16 hp gas or 18hp hydraulic engine.
    • 14″ to 20″ maximum blade capacity
    • 7-5/8″ maximum cutting depth (20″ blade)
    • Solid, sealed self aligning blade shaft ball bearings.
    • Left or right hand sawing
    • Fuel capacity 2 gallons.
    • Screw feed raise and lower system
    • Blade drive is via 4 belts on models 16 hp and up. 14 hp or bellow have 3 belts.
    • Hydraulic model input flow 25 GPM @2500 PSI maximum
    • Electric models includes motor starter switch-box with amp meter.
    • Remote throttle, choke and ignition switch are only available on 20hp models
    • 33 Amp 7.5 hp 220V 1 phase Motor
    • Call For Freight Charge

      .

    9201 Core Cut CC1800 Self-Propelled Concrete Saws by

    9201 Core Cut CC1800 Self-Propelled Concrete Saws
    Check Price for 9201 Core Cut CC1800 Self-Propelled Concrete Saws

    Self-propelled hydrostatic transmission.

    • Available with Baldor electric 7.5 hp 220V 1 phase or 13 hp/16 hp/20 hp gas or 18 hp hydraulic engine.
    • 14″ to 20″ maximum blade capacity
    • 7-5/8″ maximum cutting depth (20″ blade)
    • Solid, sealed self aligning blade shaft ball bearings.
    • Left or right hand sawing
    • Fuel capacity 2 gallons.
    • Screw feed raise and lower system
    • Blade drive is via 4 belts on models 16 hp and up. 14 hp or bellow have 3 belts.
    • Hydraulic model input flow 25 GPM @2500 PSI maximum
    • Electric models includes motor starter switchbox with amp meter.
    • 20 hp Honda model features electric start
    • 33 Amp 7.5 hp 220V 1 phase Motor

    • CC1800 Self-Propelled 14″ Guard 20″ Guard
      Engine Gas, Electric, Hydraulic Gas, Electric, Hydraulic
      Horsepower 7.5hp Electric
      13hp/16hp/20hp Gas
      18hp Hydraulic
      7.5hp Electric
      13hp/16hp/20hp Gas
      18hp Hydraulic
      Saw Length 36″ 36″
      Arbor 1 i.n. 1 i.n.
      Depth of Cut 5-5/8″ 7-5/8″
      Blade Guard Cap. 14″ 20″
      Blade Shaft RPM 2,600 2,600
      Weight 380lbs 415lbs

    CC1800 Control Panel (remote throttle, choke and ignition switch are only available on 20 hp models)

    .

    9199 Core Cut CC1300XL Concrete Saw by

    9199 Core Cut CC1300XL Concrete Saw
    Check Price for 9199 Core Cut CC1300XL Concrete Saw
    • Sturdy handle adjustable to 4 positions.
    • Available with Lincoln electric 5hp 220V 1 phase or 9 hp/13 hp Honda engine.
    • 14″ to 20″ maximum blade capacity
    • 7-5/8″ maximum cutting depth (20″ blade)
    • Solid, sealed self aligning blade shaft ball bearings.
    • Left or right hand sawing
    • Through rear axle for added strength
    • Screw feed raise and lower system
    • Power transmission to blade is via 3 molded notch 3vx premium belts
    • Easy turning and quick acting handwheel raise/lower making handling even easier
    • Call For Freight Charge

    .