Best Door Tools Store

Makita Cordless Vibrator BVR450-BVR850

• Up tp 25 minutes of run-time under load.
• Vibrates at 13,000 VPM for smooth mixing of concrete
• Produces a consistent finish on concrete footings, walls, stairs
• Increases strength of concrete
• 1″ vibrator diameter.
• Protective cover on switch and battery to prevent contamination

INCLUDES:

• 2 LXT Lithium-Ion 3.0Ah batteries (194205-3)
• 45-minute optimum charger (DC18SC)
• Carrying Case.

Makita	BVR450 4ft.	BVR850 8ft.
Watt Hours	54.0	54.0
Battery	18VDC (3.0Ah)	18VDC (3.0Ah)
Vibrations Per Minute	13,000	13,000
Weight	8.2 lbs	11.7 lbs
Shaft Length	4ft.	8ft.
Vibrator Length	8-11/16″	8-11/16″
Vibrator Diameter	1″	1″
Shipping	UPS/Fedex	UPS/Fedex

.

Dynapac Racoon Flex Shaft Concrete Vibrators, Power Units & Heads
A complete vibration system to match any job!.

The new Racoon flex shaft concrete vibrators is a complete vibration system to match any job with interchangeable flexible shafts and poker heads. The quick connection device between the drive unit and the flexible shaft makes it easy and quick for the operator to change shaft. It features a resistant, yet ergonomic, case in polycarbonate with fibre-glass fitted with a built-in handle, thus ensuring sturdiness.

Features & benefits

• Versatile : interchangeable flexible shafts and poker heads.
• Performant : 2hp electric drive unit 230 or 115V to be combined with 4 poker heads and 5 flexible shafts.
• Resistant and ergonomic case with built-in handle.
• Safe and trouble free operation.

Technical Data

• RPM 12000
• Voltage 115V or 230V-1-50/60 Hz
• Power 2 Hp
• Drive unit weight 11 lbs (5 kg)
• Dimensions 14.5″ x 4.9″ x 7.4″ (370 x 125 x 190mm)

Our Tips

• Permanently lubricated twin bearings. Only the shaft needs to be lubricated after 75 hours.
• Ordinary tools can be used to change tubes and end caps, and to replace brushes on the electric motor (brushes to be changed every 250 hours).
• One drive unit fits all combination.
• Adapters available to fit competitors models.

.

Multiquip MGX1-Series 110 V Concrete Vibrators

Ideal for short pours, walls, footings, the MGX series hand-held vibrators provide exceptional power in a lightweight, user-friendly package.

Multiquip MGX-Series 110 V.

• Lightweight aluminum motor case.
• Durable, high performance 120V universal motor.
• Vibration dampening handle reduces operator fatigue.
• Four head sizes available 0.9″, 1.1″, 1.25″ and 1.5″ diameter.
• Greatly reduced airborne contamination sealed fan acts as a suction for air taken in from the rear, passed over the motor for cooling, and discharged at the rear again.
• Double insulated no ground necessary.
• 8.2 ft (2.5 meter) shaft length
• Overall length 9-1/2 ft. (2.9 meter)

Multiquip	MGX1 110V
Horse Power	0.37 hp
Amps	3.8
Weight	12 lbs.
VPM	12,000 to 15,500

.

1 hp Multiquip CV1 Electric Concrete Vibrator

Designed for pencil head vibrators, up to 1-3/8″ in diameter, this heavy-duty motor is designed for the rigors of the job site. Multiquip flex-shaft vibrators are designed for work in medium to high-slump concrete. Typical applications include small pours, slabs, driveways, stem walls and footings.

Multiquip CV-1 1hp 115v 10 Amp.

• Electric Vibrator motors-1hp Universal motors allow operation at either 50 or 60hz
• Flexible Shafts– Eight different shaft lengths are available ranging in size from 2 to 21ft.
• Steel Vibrator Heads – Three different models available in diameters ranging 7/8″ to 1-3/8″
• Quick Connect Coupler– Makes setup on the job site fast and easy

Multiquip	CV-1
Horse Power	1hp
Amps	10
Weight	11 lbs.
RPM	16,000
Shaft Compatibility	314V
Head Compatibility	7/8″ to 1-3/8″

Multiquip Heads	900	1000	1300
Nominal Dia. In	7/8″	1-16″	1 3/8″
Compaction Capability cu. yds. per hour	1-3	2-4 3/4	3 3/4-7
Maximum Head Frequency 115V 1″ slump	12150	11700	12600
Peak-to-Peak Amplitude In Air	.062	.092	.092

Voltage/Frequency 120v 50/60 Hz

Flow through ventilation reduces contamination by taking in air from the rear of the motor.

Super-tough Zenoy Resin housing concrete won’t adhere to it.

Handles are fixed in rubber motor ends, absorbing the shock if the motor is dropped.

UL and CSA approved

Strain relief prevents power cord pullouts.

Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM.

.

Multiquip CV3 3 hp 115 Volts 20 Amp Concrete Vibrator

Designed for steel vibrator heads, up to 2-5/8″ in diameter, this heavy-duty motor is designed for the rigors of the job site. Multiquip flex-shaft vibrators are designed for work in medium to high-slump concrete. Typical applications include small pours, slabs, driveways, stem walls and footings.

• Large vibration isolated handles protect the motor and operator.
• Strain relief prevents power cord pullouts.
• Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM.
• Flow through ventilation reduces contamination by taking in air from the rear of the motor.
• Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM.
• Flexible Shafts-Eight different shaft lengths are available ranging in size from 2 to 21 ft.
• Ideal for steel vibrator heads available from 1-3/8″ to 2-5/8″ in diameter
• Industry’s strongest outer casing constructed of steel flat wire covered by alternating layers of wire mesh, fabric and rubber
• Quick Connect Coupler-Makes setup on the job site fast and easy

Multiquip	CV3
Horse Power	3 hp
Amps	20
Weight	14 lbs.
RPM	19,250
Shaft Compatibility	382V
Head Compatibility	1-3/8″ to 2-5/8″

MQ Steel Vibrator heads	1400	1700	2100	2600
Nominal Dia. In	1 3/8″	1 11/16″	2 1/8	2 5/8″
Compaction Capability cu. yds. per hour	3 3/4-7	9 1/2-15	12 1/2-21	22-35
Maximum Head Freq’y 115V 1″ slump	12600	11450	11200	9200
Peak-to-Peak amplitude In Air	.092	.114	.106	.108

• Super-tough Zenoy Resin housing—concrete won’t adhere to it
• Handles are fixed in rubber motor ends, absorbing the shock if the motor is dropped
• UL and CSA approved
• Anyway you go , Stow gets the job done better and in less time

.

Multiquip CV2 2 hp, 115 Volts, 15 Amp. Concrete Vibrator

Designed for steel vibrator heads, up to 2-1/8″ in diameter, this heavy-duty motor is designed for the rigors of the job site. Multiquip flex-shaft vibrators are designed for work in medium to high-slump concrete. Typical applications include small pours, slabs, driveways, stem walls and footings.

• Large vibration isolated handles protect the motor and operator
• Strain relief prevents power cord pullouts
• Cassette style motor improves durability and performance by minimizing friction and enabling the motor to maintain optimum RPM
• Flow through ventilation reduces contamination by taking in air from the rear of the motor
• Flexible Shafts-Eight different shaft lengths are available ranging in size from 2 to 21 ft.
• Ideal for steel vibrator heads available from 1-3/8″ to 2-1/8″ in diameter
• Industry’s strongest outer casing constructed of steel flat wire covered by alternating layers of wire mesh, fabric and rubber
• Quick Connect Coupler-Makes setup on the job site fast and easy

Multiquip	CV2
Horse Power	2 hp
Amps	15
Weight	13 lbs.
RPM	18,000
Shaft Compatibility	382V
Head Compatibility	1 3/8″ to 2-1/8″

MQ Steel Vibrator heads	1400	1700	2100	2600
Nominal Dia. In	1 3/8″	1 11/16″	2 1/8	2 5/8″
Compaction Capability cu. yds. per hour	3 3/4-7	9 1/2-15	12 1/2-21	22-35
Maximum Head Freq’y 115V 1″ slump	12600	11450	11200	9200
Peak-to-Peak amplitude In Air	.092	.114	.106	.108

• Super-tough Zenoy Resin housing—concrete won’t adhere to it
• Handles are fixed in rubber motor ends, absorbing the shock if the motor is dropped
• UL and CSA approved
• Anyway you go , Stow gets the job done better and in less time

.

Wacker M 2000 115 Volts, Internal Vibrator, Power Units & Heads
Economical concrete consolidation for every need The electrically driven HMS system is extremely versatile. These high frequency flex-shaft internal vibrators can be adapted to every type of application. Heads and shafts can be easily combined and rapidly exchanged to match the right equipment to the job. Unique hybrid heads offer optimum concrete consolidation and movement. WACKER HMS systems provide reliable performance and quality concrete.

Features & benefits

• Lightweight, but rugged unit preferred by operators.
• Double insulated and grounded motor improves safety.
• Dual air filters extend motor life and allow for easier maintenance.
• High frequency and amplitude of the vibrator head on the Head, Motor, Shaft (HMS) System ensures more complete consolidation of concrete.
• Motor airflow from rear to front prevents dust buildup that would otherwise cause motor damage.
• Standard quick disconnect coupling on motor facilitates shaft exchange. No troublesome threading or stripping.
• Quick release brush covers simplifies brush replacements. bullet Dust and waterproof on-off switch eliminates burnout and damage.
• Strain relieved electrical cord inhibits cord pull out, reducing downtime.
• Integrated quick disconnect couplings on shafts easily connect to all WACKER motors, offering 62 combinations.
• Circuit breaking carbon brushes stop motor when replacement is required.
• Standard 60 Hz electrical power.
• Four head bearings lubricated with high temperature resistant synthetic oil, prevent bearing failure due to inadvertent operation of equipment out of concrete.
• Hardened head housing and tip prolongs head life and increases productivity.
• Oil resistant reinforced rubber shafts with steel reinforced coils on the quick disconnect end reduces wear and increases shaft life.

Technical Features

Description	Metric		Inch
Power Source	Universal electric motor
Max. power output	1,7	kW	2.3	hp
Voltage	115	V	115	V
Rated amperage	15	A	15	A
Frequency	50-60	Hz	50-60	Hz
Speed no-load	17.500	1/min	17,500	rpm
Overall size l x w x h	350 x 160 x 200	mm	13.75 x 6.25 x 8	in
Weight	5,9	kg	13	lb
Shipping size	430 x 180 x 255	mm	17 x 7 x 10	in
Shipping weight (including packaging)	7	kg	15.5	lb

.

Northrock Gas Backpack Pro 50 Concrete Vibrator

Power Units

• Northrock Backpack vibrators are driven by a fuel efficient two cycle, 50cc, 2-1/2 hp gas engine
• This power unit is lightweight only 19 lbs.
• Powerful enough to drive any of Northrock’s 7ft, 10ft or 14ft flexible shafts and vibrator heads up to 2″ in diameter
• A quick connect/disconnect system allows for assembly/disassembly in seconds
• Designed for ease of operation and operator comfort
• Free shipping

.

Northrock Vibrator Heads

• Seven Northrock vibrator heads are available in a range of diameters from 3/4″ up to 2-1/2″
• Diameter is selected by the scope of the job and the speed required to complete it
• A high level of centrifugal force amplitude are created by rotating Northrock’s unique eccentric weights within the head at the desired frequency
• A special oil bath system keeps the weights lubricated at all times
• All heads are sealed at the factory and are maintenance free
• Built for the busy contractor and a wide range of tough rental applications, they are designed for reliability and durability over extended periods of time

Special heads

• A short 4-1/2″ head available for slabs, tilt-up and other select precast work
• Coated heads from 1-1/2″ to 2-1/2″ diameter are available to protect epoxy-coated rebar

.

Northrock Flex Shafts Standard

• Lengths from 2 ft to 21 ft in convenient increments
• Lengths up to 60 ft are available via a simple shaft connector
• Heavy-duty shafts are stiffer and are used primarily for better poke ability

.