Best Door Tools Store

TAVY Thin-Skin.

• Two Part Underlayment System was developed to provide an underlayment for tile that could be installed over any surface without adding additional height to the sub-floor.
• Increase tiling applications by eliminating tear outs of existing surfaces Allows for tile or stone to be set on any surface.
• Lightweight and easier to transport (less than 15 lbs. per 100 square feet) NO dusty mess to clean up
• NO additional height added to any surface as opposed to current underlayments.
• NO waste, all TAVY Thin-Skin Underlayment pieces are usable regardless of size and shape
• 25% – 50% lower cost than other underlayments.
• One roll of TAVY Thin-Skin Underlayment 2.5′ X 40′ and one gallon of TAVY Thin-Skin #007 Glue will cover 100 square feet.
• Thin-Skin Underlayment is ideal for making templates for difficult cuts No need to buy or install nails/screws Minimize overall load weight.
• Crack suppression up to 1/8″ over concrete.

.

• The TAVY Thin-Skin Two Part Underlayment System was developed to provide an underlayment for tile that could be installed over any surface without adding additional height to the sub-floor.
• TAVY Thin-Skin #007 Glue is also technically engineered to meet Armen Tavy’s specifications.
• TAVY #007 Glue is a high-end multi-purpose adhesive high in solids, which will adhere to any surface.
• Scarifying the existing surface before use is not necessary.
• The only surface preparation required is to have a clean surface that is free from oil, water, wax and dust.

.

Makes accurate setting of marble quicker and easier!

The Tile Puck can be used for any number of leveling applications.

Showers seats, counter tops, Kitchen appliances, Machine, you name it.

Made of non-marking polyethylene plastic, measures only 5″ in diameter, 1″ thick and weights 10 ounces.

To detect lippage, slide the Tavy Tile Puck and listen.

For leveling, place the Tavy Tile Puck and get an instant reading.

Helpful Hints:

Armen Tavy Says… My Tile Puck is placed on the first piece of tile or stone and allows you to level this first piece easily in one operation. This process is repeated over the next row of tiles and then the Puck can be moved across these tiles that are set to check for any high spots.

The 10 ounce weight of my Puck creates a definite clicking sound as high spots are found, which allows the tile setter to make necessary corrections before it’s too late..