Category: Home

9702 Pearl PA-7 Wet Tile Saw by PEARL

9702 Pearl PA-7 Wet Tile Saw
Check Price for 9702 Pearl PA-7 Wet Tile Saw

Pearl Abrasive PA-7 Wet Tile Saw

  • 7in professional tile saw.
  • Heavy duty stainless steel water pan.
  • Powerful 3/4hp high torque motor.
  • 20in rip & 14in diagonal cut
  • 7in high performance porcelain diamond blade & water pump included.
  • Steel frame & cast aluminum components
  • 1 year manufacturers warranty.
  • Weighs only 40 lbs.

.

Posted in Home

9566 QEP Brutus 24in Professional Tile Saw 61024 by QEP

9566 QEP Brutus 24in Professional Tile Saw 61024
Check Price for 9566 QEP Brutus 24in Professional Tile Saw 61024

QEP Brutus 24″ Professional Tile Saw
Model 61024

  • Free Fold-out stand with 3” wheels, 10″ diamond blade, side table & water pump
  • Rip cuts tile 24″ square, 18″ diagonal
  • Powerful 1.5 hp, 11.5 Amps, 3450 Rpm motor
  • Weighs 106 lbs. w stand
  • Size: 40” L x 21.5” W x 48.3” H (w/stand)
  • Cutting table utilizes a slide tube mounting system for smooth, accurate cutting.
  • Adjustable tilting head offers quick and easy 45° to 90° miter cuts.
  • Automatic thermal overload protection prevents tile saw from overheating.
  • Locking tilt-up blade guard makes blade changes quick and easy.
  • Convenient stand with rear locking wheels keeps tile saw secure, and easily transportable.
  • Rear and side water tray for water containment.
  • 10″ blade with standard 5/8″ arbor
  • Depth of cut: 3-1/8″.
  • Rust proof, fiberglass impregnated water tray easily slides in and out for easy cleaning.
  • Large non-slip rubber matted table with pull-out extension to support large format tile and slabs.

.

Posted in Home

9322 Wacker EH 27 Electric Breaker with Cart Point and Chisel by Wacker Corporation

9322 Wacker EH 27 Electric Breaker with Cart Point and Chisel
Check Price for 9322 Wacker EH 27 Electric Breaker with Cart Point and Chisel

Wacker EH 27 Electric Breaker Buy a Wacker Eh27 with cart chisel and point and save

  • EH27 was $1539.99 now only $1399.99

    • These electric universal breakers can be used, in addition to breaking up and demolition work, for driving in earthing rods as lightning conductors, driving in piles using special hoods, and ramming in probes to obtain soil samples for geological purposes and environmental soil examinations. The telecommunications construction sector, and fencing/tent building companies are also frequent users of this type of equipment.

    • Driven by a powerful tried and tested electric universal motor with protective insulation for connecting directly to the mains.
    • A specially designed protective hood, which is made of shock-resistant plastics, ensures excellent cooling of the motor as well as ensuring good noise suppression.
    • The vibration-damped handles and, in particular, the almost recoilless air-cushioned percussion system, ensure a practically vibration-free operation.
    • Thanks to the optimum spring mounting of the three operating handles and the complete engine protective hood this machine is suitable for long periods of operation.
    • Standard with 10 m / 33 ft. power cord.
    • EH 27 comes with a point, chisel and hammer cart

    Technical Data EH 27

    Description Metric Inch
    Length x width x height 750 x 530 x 210 mm 29.5 x 20.9 x 8.3 in
    Weight without tool 27,0 kg 59.5 lb
    Shank hex 28 x 152 mm hex 1.1 x 6.0 in
    Percussion rate 1.050 1/min 1,050 blows/min
    Stroke impact 38 (3,8) J (mkp) 28,0 ft. lb.
    Drive engine universal a.c. motor with protective insulation
    Voltage 115 1~ V 115 1~ V
    Frequency 50/60 Hz 50/60 Hz
    Rated current 15 Amps 15 Amps
    Power draw 1,8 kW 2.4 hp

    .

    Posted in Home

    7769 Raimondi SA 80 Brick & Block Saw by Raimondi

    7769 Raimondi SA 80 Brick & Block Saw
    Check Price for 7769 Raimondi SA 80 Brick & Block Saw

    SA80 Raimondi Brick & Block Saw

      Buy a Raimondi SA80 Brick and Block saw and save
    • Raimondi SA80 Brick and Block saw was $2595.00 now only $2249.00
    • Cut 31-1/2″ rip cut.
    • Cut 20″x20″ diagonally.

    • 12″ or 14″ Blade capacity
    • Depth of cut 5″ with a 14″ blade(14″ Blade included).
    • Weight 154lbs.
    • Cutting table width 23-5/8″

    SA-80 Features

    • 2.2 hp motor, 110 volts, 15 amps
    • Belt driven motor delivers plenty of torque
    • Head tilts to 45 degrees
    • Steel roller for smooth cart rolling.
    • Folding legs with wheels for maneuverability.

    .

    Posted in Home

    7680 Target by Husqvarna VH5 High Speed Diamond Blade by

    7680 Target by Husqvarna VH5 High Speed Diamond Blade
    Check Price for 7680 Target by Husqvarna VH5 High Speed Diamond Blade

    Target by Husqvarna VH5 Features

  • For general purpose cutting of cured concrete and brick.
  • Reliable at an economical price
  • Application: All-purpose
  • Job Size: Small to medium
  • Horsepower Range: 5-20 hp
  • Equipment types: High Speed, Small Walk-behind, and masonry saws
  • Cutting method: Wet or dry cutting
  • Bonding/Weld type: Laser weld
  • Arbor: 1″ / 20mm
  • Diamond depth: 0.400 inch
  • To reduce undercutting when wet cutting with a dry blade, be sure to minimize blade / sub-base contact

    • .

    Posted in Home

    6885K Partner by Husqvarna K750 Concrete Saw w/ VH5 diamond blade by

    6885K Partner by Husqvarna K750 Concrete Saw w/ VH5 diamond blade
    Check Price for 6885K Partner by Husqvarna K750 Concrete Saw w/ VH5 diamond blade

    K750 Concrete Saw w/ 14″ VH5 diamond blade

  • Free shipping
  • The only power cutter with a 1 year warranty
  • Kit includes (1) 14″ saw and (1)14″ VH5 diamond blade
  • Kit only available in 14″

    • Suitable for:

    • Concrete cutting
    • Pile cutting
    • Minor asphalt work
    • Masonry work
    • Gas/water/sewer maintenance
    • Landscape work

    Fewer vibrations and less noise

    The K750 has an entirely new vibration damping system. The fuel tank, handle and intake system is an entirely new vibration damping unit that gives particularly low handle vibrations. The muffler has been doubled in size and with the large intake system allows the motor to run quieter at higher powers.

    New Active Air Filtration

    Three separate filter systems. The first system uses the centrifugal force at the cooling fan and separates 80-90% of the dust particles from the intake air. A settling compartment has been fitted where any extra dust settles, which mean the filter stays clean even longer. The intake air then passes through a second stage in the form of an oil impregnated 3-layer adhesive filter that catches any remaining dust particles. The third stage is a traditional paper filter, which represents an extra level of security preventing dust particles from mixing with the intake air. This extends the cleaning interval for the fixed filters 3.5 times (compared to conventional filter systems), which reduces idle time and service costs.

    .

    Posted in Home

    6090 Pearl Specialist Wet Diamond Blade by PEARL

    6090 Pearl Specialist Wet Diamond Blade
    Check Price for 6090 Pearl Specialist Wet Diamond Blade

    Buy a 10″ Pearl Specialist blade and save

  • Pearl 10″ Specialist was $61.49 now only $55.00

    • Pearl DTL Series B28 professional Bronze Bonded Wet Diamond Blade

    • Our DTL’s have a continuous rim for a clean, chip-free cut.
    • Cut tile, ceramic tile, marble, soft Stone & porcelain.
    • Bronze Bonded for better performance.
    • 5/8″ arbor
    • .060 thickness

    .

    Posted in Home

    48261 Raimondi Cico Mixer by Raimondi

    48261 Raimondi Cico Mixer
    Check Price for 48261 Raimondi Cico Mixer

    Raimondi Cico Mixer

    Buy a Cico Power Mixer and save

  • Cico mixer was $699.00 now only $600.00
    • Lightweight portable belt driven mixer.
    • Free your time and let the mixer do the work.
    • Comes with two buckets work with one while the other is mixing.
    • Mix properly at 55 Rpm without whipping air into the batch.
    • Weight only 28.5 lbs. Will outperform and outlast several mixing drills.
    • A powerful unit that will mix up to 50 lbs, dry!

    .

    Posted in Home

    7286 DeWALT D28110 Angle Grinder by Dewalt

    7286 DeWALT D28110 Angle Grinder
    Check Price for 7286 DeWALT D28110 Angle Grinder

    Buy a DeWALT D28110 Angle Grinder and Save

  • DeWALT D28110 Angle Grinder was $69.99 now only $59.99, While supplies last

    • DeWALT D28110 Angle Grinder

    • 7 Amp, 4.1 lbs, 11,000 Rpm
    • Designed for faster material removal and higher overload protection
    • Quick-Change Wheel Release provides easier and quicker wheel removal without the need for a wrench
    • Low profile jam-pot gear case increases durability and allows tool to fit into tight spaces.
    • Oversized, protected spindle lock button provides easier and quicker wheel changes
    • 2 position removable side handle provides increased comfort and control
    • Slim, ergonomic body design provides increased comfort in extended use applications
    • 4-1/2″ blade diameter with a 5/8″-11 spindle thread

    .

    Posted in Home

    7505 Tomecanic Astro 800 Electric Tile Cutter by Tomecanic

    7505 Tomecanic Astro 800 Electric Tile Cutter
    Check Price for 7505 Tomecanic Astro 800 Electric Tile Cutter

    Tomecanic Astro 800 Electic Tile Cutter

    Buy a Tomecanic Astro while supplies last and SAVE

  • Tomecanic Astro was $164.99 now only $139.99
  • Free shock-proof case, two 200 mm (8″) diamond blades (one turbo, one continuous rim) included.

    • General Information

    • Stainless steel cutting table with water recovery system.
    • Only weighs 27-1/2 lbs, (12.5 kg)
    • Thermal overload switch
    • Cuts Porcelain, ceramic, glass, tiles, marble, and other materials
    • Includes shock-proof case, two 8″ (200 mm) diamond blades (one turbo, one continuous rim).
    • Tilt-up Table for mitering up to 13-1/3″ (334 cm) tile
    • Tile Saw features a flat, open-table design as well as a large work surface for high visibility.
    • Adjustment knobs lock the guide in place to ensure parallel alignment to the blade.

    .

    Posted in Home
    1. Pages:
    2. 1
    3. 2