Best Door Tools Store

Husqvarna FS4800 D Front Pivot

Free shipping from factory warehouse

Model	FS4800D 14″	FS4800D 18″	FS4800D 26″	FS4800D 30″
Arbor	1 in.	1 in.	1 in.	1 in.
Depth of Cut	4.5″	6.5″	10.5″	12″
Blade Guard Cap.	14″	18″	26″	30″
Blade Shaft Rpm	2,900	2,400	1,800	1,600

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

Power transmission

• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
• Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

Other Features

• Slip-on blade guard comes with auto-latch for easy removal and installation.
• Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Electrohydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator; optional electric clutch – blade drive disengagement system
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.

Professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS4800 D Electric Tracking Front Pivot

Free shipping from factory warehouse

Model	FS4800D 14″	FS4800D 18″	FS4800D 26″	FS4800D 30″
Arbor	1 in.	1 in.	1 in.	Depth of Cut	4.5″	6.5″	10.5″	12″
Blade Guard Cap.	14″	18″	26″	30″
Blade Shaft Rpm	2,900	2,400	1,800	1,600

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

Power transmission.

• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
• Power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class.

Other Features

• Slip-on blade guard comes with auto-latch for easy removal and installation.
• Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Front pivot model has a patent pending electric tracking system, which allows operator to make tracking adjustments with a switch while cutting.
• Electro-hydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator.

Professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS4800 D Rear Pivot

Free shipping from factory warehouse

Rear pivot model offers an electrically controlled hydraulic differential system which locks rear wheels for positive traction to prevent slipping.

Model	FS4800D 14″	FS4800D 18″	FS4800D 26″	FS4800D 30″
Arbor	1 in.	1 in.	1 in.	1 in.
Depth of Cut	4.5″	6.5″	10.5″	12″
Blade Guard Cap.	14″	18″	26″	30″
Blade Shaft Rpm	2,900	2,400	1,800	1,600

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

Power transmission.

• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
• Power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class.

Other Features

• Slip-on blade guard comes with auto-latch for easy removal and installation.
• Positive locking detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Rear pivot for repetitive cuts, saw is easier to maneuver
• Electro hydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator.

For large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS413 Concrete Saw

Free shipping from factory warehouse

Blade & water tank sold separately

Patented, engine and blade guard mounting system reduces overall vibration at the operator handle.

Blade guard features a precision bearing hinge system reducing wear and noise caused by vibration.

Water spray system allows for easy maintenance and better water flow

Tough, Adjustable Handlebar

• Handles can be easily folded down for transportation and storage
• Optional water tank is available for use when a constant water supply is not available.

Bladeshaft

• Bladeshaft system does not use set screws and allows for easy servicing of sheaves and blade collar.
• Dual arbors allow mounting of blade on either end of blade shaft for right or left side cutting
• Features hard case treatment for strength and rust resistance

IntelliSeal Bladeshaft System

• patented bladeshalft system allow for a minimum of 250 maintenance-free hours and eliminates daily greasing of bearings.
• Frame resists bending & flexing
• Protective cage with integrated lift bale protects engine.

.

Husqvarna FS4800 D 3-Speed Gearbox Front Pivot

Free shipping from factory warehouse

Model	26″	30″	36″
Arbor	1 in.	1 in.	1 in.
Depth of Cut	10.5″	12″	15″
Blade Guard Cap.	26″	30″	36″
Blade Shaft RPM	3,100, 2,180, 1,870	2,600, 1,800, 1,570	2,260, 1,580, 1,360

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

3-Speed Gearbox

• Three-speed gearbox utilizes the patented power transmission system which has a right angle gearbox configuration.
• Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

Other Features

• Gear selections for different blade diameters are clearly identified with numbers and colors.
• Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting – with no belts, chains or gears; requires no adjustment.
• Front pivot model has a patent pending electric tracking system option, which allows operator to make tracking adjustments with a switch while cutting.

Gearbox shift lever is used to change output speed of the engine gearbox. Three speeds and two neutral positions are standard. Gearbox shift lever positions (1, 2 and 3) are color coded to match the blade diameter and blade-shaft rpm decal located on the control panel.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS4800 D 3-Speed Gearbox Rear Pivot

Free shipping from factory warehouse

Rear pivot model offers an electrically controlled hydraulic differential system which locks rear wheels for positive traction to prevent slipping.

Model	FS4800D-3 26″	FS4800D-3 30″	FS4800D-3 36″
Arbor	1 in.	1 in.	1 in.
Depth of Cut	10.5″	12″	15″
Blade Guard Cap.	26″	30″	36″
Blade Shaft RPM	3,100, 2,180, 1,870	2,600, 1,800, 1,570	2,260, 1,580, 1,360

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

3-Speed Gearbox

• Three-speed gearbox utilizes the patented power transmission system which has a right angle gearbox configuration.
• Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

Other Features

• Gear selections for different blade diameters are clearly identified with numbers and colors.
• Positive locking detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting – with no belts, chains or gears; requires no adjustment.
• Front pivot model has a patent pending electric tracking system option, which allows operator to make tracking adjustments with a switch while cutting.

Gearbox shift lever is used to change output speed of the engine gearbox. Three speeds and two neutral positions are standard. Gearbox shift lever positions (1, 2 and 3) are color coded to match the blade diameter and blade-shaft rpm decal located on the control panel.
Power transmission system has a right angle gearbox configuration.

.

Target by Husqvarna FS500 Concrete Saw

• Their unique transmission makes them ideal for more demanding jobs, despite their compact size.
• Engine options from 13 hp to 24 hp.
• Blade sold separately.

Model FS 500	FS513 18″	FS520 20″	FS524 24″
Engine	Honda GX390	Honda GX620	Honda GX670
Horsepower	13 hp	20 hp	24 hp
Arbor	1 i.n.	1 i.n.	1 i.n.
Depth of Cut	6-5/8″	7-5/8″	9-5/8″
Blade Guard Cap.	18″	20″	24″
Blade Shaft RPM	2,610	2,610	2,000

Spring Assist Screw Feed

• Spring assist screw feed raises and lowers the blade quickly and easily, giving the operator better control of cutting depth
• Engine and blade shaft mounting system reduces overall vibration giving you better performance, and significantly reduces vibrations at operator handles.
• On/off switch conveniently located

Tough, Blade Guard

• Precision bearings hinge system reducing wear and noise caused by vibration.
• Water spray system allows for easy maintenance and better flow

Bladeshaft

• Patended IntelliSeal bladeshaft system allows for a minimum of 250 maintenance free hours and eliminates daily greasing of bearings.
• Dual arbors allow mounting of blade on either end of blade shaft for right or left side cutting
• Hydrostatic differential drive system eliminates drive gears from rear wheels reducing unnecessary rear wheel wear.

Reinforced Box Type Front Axle Assembly

• Strengthens the overall structure of saw, frame resists bending & flexing
• Increases stability when raising and lowering and improves sawing performance
• Steel Frame reduces vibration from the blade, increasing sawing production while reducing component wear
• Features hard case treatment for strength and rust resistance
• Handles can be easily folded down for transportation and storage
• Protective cage with integrated lift bale protect engine.
• Optional water tank is available.

.

Target by Husqvarna FS 6600D Concrete Saw

Free shipping from Husqvarna Factory warehouse

Price includes Electric Track and Blade Clutch

• The FS 6600 D is a powerful and highly efficient saw. Its power-to-size ratio makes it extremely versatile and productive saw in all cutting applications
• Available in 18″, 26″, 30″, 36″, and 42″ blade guards
• John Deere 4-cylinder turbocharged diesel engine is rated at 66 hp
• Engine has a cold start feature for use in cold weather conditions and meets current EPA requirements
• Right angle gearbox configuration and 16V- belts transmit more power to blade shaft than similar models in it’s class delivering 60 HP at the blade shaft
• The patented Intelliseal blade shaft system allows for a minimum 500-hour service interval and eliminates daily greasing of bearings
• Patent-pending electric tracking system option allows the operator to make tracking adjustment while cutting
• Balanced Dual motor hydrostatic drive system eliminates surging and lag while cutting
• Patent -pending multi-positional handlebars easily adjust to operator’s preference which increases operator comfort and reduces fatigue
• New, lightweight design slip-on blade guards come with an auto latch for easy removal and installation. An improved handle makes transportation easier
• A wide tapered mounting spade contributes to blade guard stability
• The blade clutch allows engine operation and saw movements without blade rotation, which can assist in freeing blades

.

Husqvarna FS3500G Series Features

The Husqvarna FS3500 G features a well-balanced, low profile design. The design makes it an ideal saw for small to medium jobs.

Free shipping from factory warehouse

Model	FS3500G 18″	FS3500G 26″	FS3500G 30″
Arbor	1 in.	1 in.	1 in.
Depth of Cut	6.5″	10.5″	12″
Blade Guard Cap.	18″	26″	30″
Blade Shaft Rpm	2,750	1,750	1,530

Engine

• 35 hp Wisconsin gasoline engine
• 26 hp at the blade shaft
• Meets current EPA requirements

Wheels

• Sealed ball bearing, maintenance-free polyurethane front wheels
• Covered rear wheels

Other Features

• Fully enclosed transmission
• One-piece water manifold with multiple jets
• Lift bail is standard on all models
• Box frame is the most rigid available and provides long life and less stress on the blade shaft and bearings
• Turbo-style cyclone pre-cleaner reduces filter maintenance
• Progressive restriction indicator for air filter
• Complete back lit instrument panel with tachometer, hour meter, voltmeter, and oil pressure gauges
• Cutting depth indicator clearly shows depth of blade in the cut is adjustable for all blade diameters
• Single lever for forward/reverse, raise/lower offers reliable and infinite variable ground speed control and allows the blade to quickly be raised and lowered
• Separate neutral engage lever is mounted on the cowl and allows for quick disengage of transmission for ease in transport
• Arbor guard/nose latch and a blade guard handle are standard.
• FS 3500 can accommodate slip-on blade guards up to 30″.
• One piece manifold with multiples jets.
• Cyclone pre-cleaner reduces filter maintenance.
• Dual arbors allows the blade to be mounted on either end of bladeshaft for right or left cutting.
• For maximum engine protection, the air filter has a progressive restriction indicator.

.