Best Door Tools Store

MK Wet Cutting Rail Saw

Features

• 130″ length of cut* – 13 Amp direct-drive motor
• Tilting head for precise 45º miter cuts up to 2-1/4″ deep
• Adjustable height plunge-cutting head
• Light weight precision extruded aluminum rails provide accurate and even tracking during all cutting operations
• Rails have replaceable slip-on pads to protect material surface from scratches
• Precision, maintenance-free bearings provide smooth and reliable tracking of the cutting head
• Replaceable dust filter
• Valve controlled water feed
• 12″ MK-62G wet cutting diamond blade included
• 72″ 115V standard U-ground electrical cord and GFCI
• Saw comes complete with two sets of 72″ rail, rail connector plate, 12″ blade capacity cutting head, two hold-down clamps and standard garden hose water connector
• Additional rails for extending cutting capacity sold separately
• One-year limited warranty

* Saw shown with 72″ rail. Second rail set included with saw extends cutting length to 130″

Included with MK Rail Saw: Cutting head, 2 sets 72” rails, 4 parallel spreader brackets, 1 rail connector plate, 2 hold down clamps, 12” MK-62G diamond blade, Water pump

.

DIAMANT DX-350 Series

For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc.

• Powerful Belt Driven 110 Volts or 220 Volts, single phase motor
• With thermal and overload security switches.
• Water pump with control valve for cooling of the diamond blade.
• 20 Amps circuit breaker required.
• Rail saw able to plunge cut!
• 14″ blade diameter (blade not included)
• Max cutting height up to 5″ (14″ blade)
• Motor assembly mounted on sliding bearings.
• Vertically adjustable and foldable mobile head for miter cuts.
• With guide for repetitive cuts and fold-away accessory for repetitive miter cuts.
• Electric cable: 4.9 ft. (1,5 m.)

Cutting Capacity

• DX-350 32″ using plunge cutting feature.
• DX-350L 49″ using plunge cutting feature.
• Free 10 gauge 25ft extension cord with purchase of a Rubi DX-350, 120 Volt model only.
• Material lock down bar included on DX350L only

.

MK-1590 Wet Cutting Rail Saw

• 130″ length of cut.
• Rails have replaceable slip-on pads to protect material surface from scratches.
• Replaceable dust filter.
• Valve controlled water feed.
• 12″ wet cutting diamond blade included.
• Expandable rails
• Cuts 3-3/4″ thick material
• Bevel cut, 45 or 50 degrees.
• Tilting head for precise 45º miter cuts up to 2-1/4″ deep
• Adjustable height plunge-cutting head.
• Locking device for plunge cutting.
• Light weight and portable.
• Optional vacuum system anchors rails to materials.
• Uses 12″diamond blades.
• 13 Amp motor, 115 Volts, 1″ arbor.
• Depth of cut 2-7/8″.
• Light weight precision extruded aluminum rails provide accurate and even tracking during all cutting operations.
• Precision, maintenance-free bearings provide smooth and reliable tracking of the cutting head.
• Saw comes complete with two sets of 72″ rail, rail connector plate, 12″ blade capacity cutting head, two hold-down clamps and standard garden hose water connector.
• Additional rails for extending cutting capacity sold separately.
• Saw shown with 72″ rail. Second rail set included with saw extends cutting length to 130″.
• 72″ 115 Volts standard U-ground electrical cord and GFCI.
• One-year limited warranty.

Included with MK-1590

• Cutting head
• Two sets of 72” rails
• Four parallel spreader brackets
• Rail connector plate
• Two hold down clamps
• 12” diamond blade

.

Rubi DS300 Rail Saw

For ceramic tiles and all types of building materials such as brick, face-brick, fire brick, etc.

• Free Rubi 12″ diamond blade, 1″ arbor
• Water pump with control valve for cooling of the diamond blade.
• Vertically adjustable and fold-able mobile head for miter cuts.
• Rail pivots to a variety of angles for a perfect miter cut
• Thermal protection against current overload
• Remove-able legs for ease of transporting
• Material lock down bar included on DS300L only
• Rolls on two chromed steel guides.
• Motor assembly mounted on sliding bearings.

Specifications.

• DS-300 table Size: 23” x 33” (59 x 86 cm.) for
• DS-300-L. table size: 33” x 51” ( 86 x 130 cm.)
• Weight: DS300 250 lbs/ DS300L 382 lbs.
• DS300 Rip cut 35″ tile, diagonally cut 24″ x 24″ tile
• DS300L Rip cut 51″ tile, diagonally cut 36″ x 36″ tile
• Powerful 2.6 hp 110V, 60 Hz, motor.
• Use either 12″ or 14″ diamond blades.

.

Raimondi Zipper Advanced Rail Saw

• Powerful belt driven 110 Volts, single phase motor
• Cast and extruded aluminum framework.
• Rail saw able to plunge cut
• Polypropylene pan for easy cleaning capacity 38 lt (10 Gal)
• 12″ diamond blade included, max blade diameter 14″
• Cutting capacity thickness of up to 4-3/4″ (120mm)
• Re-adjustable square for long lasting precision
• Sliding motor assembly with cast aluminum housing provided with 4 re-adjustable pulleys (double bearings only 2 are adjustable).
• Material lock-down bar and Collapsible table extensions are optional.

Technical Features

Raimondi	Zipper 105 (41″)	Zipper 130 (51″)
Motor	110V	110V
Horsepower	2.2	2.2
Blade RPM	2400	2400
Blade Capacity	12″/14″	12″/14″
Depth of Cut 14″ blade	4-3/4″	4-3/4″
Length of Cut	41″	51″
Diagonally Cuts	29-1/2″ x 29-1/2″ Tile	34-5/8″ x 34-5/8″ Tile
Weight	205 lbs.	225lbs.
LxWxH (inches)	61″ x 23-5/8″ x 35.5″	68-7/8″ x 23-5/8″ x 35.5″
Shipping	Freight Truck	Freight Truck

.

Target By Husqvarna Stonematic Features

For cutting today’s popular big stone slabs and tiles, the Husqvarna Stonematic TS 250 XS has the capacity, versatility and superior cutting power required. Cut material 36″ in a single pass, or diagonally cut a 24″ tile up to 3-3/4″ thick with your choice of a 1-1/2 or 2 hp high torque motor. Designed for heavy material, but with portability and operator comfort in mind.

• High torque continuous duty 1-1/2 or 2 hp totally enclosed, fan-cooled motor (T.E.F.C.) with the highest torque in its class.
• Free stand with caster wheels and extension table
• The sliding pan features a powder-coated, steel water pan to resist scratching and rust.
• Superior track system features large steel cart wheels that roll smoothly over small particles of dirt without restricting the smooth rolling action.
• Blade not included
• The Stonematic saw separates into manageable components
• Superior track system, dirt does not hinder the smooth rolling action
• Can make virtually any cut on a 3″ thick, 24″ square slab, rip, plunge, bevel miter, or compound angle
• Extra wide blade guard provides more coverage to both the blade and the shaft nut and eliminates rubbing of profile wheels against the sides of the guard.
• 2 hp model comes complete with an ammeter which enables the user to visibly control the motor safety overload.
• Two year warranty
• Pigtail Adapter (Required for 110V use) is sold separately

.