Category: 34in to 10 ft Stone Saws

7535 Intertool Trac Star 2000 Stone Saw by Intertool

7535 Intertool Trac Star 2000 Stone Saw
Check Price for 7535 Intertool Trac Star 2000 Stone Saw

Intertool Trac Star 2000 Stone Saw

Features

  • Powerful 115 v, 18.8 Amp, 1-1/2 HP Heavy duty “washdown” motor.
  • Produces a remarkable 4-1/2 ft. lbs of torque and carries a one year warranty.
  • The blade revolves at 1725 rpm and won’t slow down, even when cutting 30 mm granite in one pass.
  • The saw operates on a v-groove track and is AUTOMATICALLY drawn down the track with a variable speed, front wheel drive motor.
  • Variable speed drive motor allows more efficient and effective cutting
  • Operating under a constant pressure as it pulls the power unit down the trac.
  • This assures the blade of no abrupt jerks into the stone as it cuts and results in a perfect, straight cut with no saw marks on the vertical edge.
  • A standard 8” blade will cut 2-1/4” stone, 7” blade will cut up to 1-3/4” and a 10” blade will cut 3-1/4”.
  • Fast. Accurate. Portable. Automatic.

The Silent Star blade

  • An INTERTOOL exclusive, was designed to cut fast. 3/4″ Texas Pink granite 1 foot per 8 seconds, harder granites may take a few more seconds.
  • Multiple sandwich technology with chip free cutting, 10 mm segments (double the size of generic blades), giving extra long life (up to 50 slabs of stone).

    • Saw includes 12’, 7’6” and 4’6” rails

    .

    Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws

    6575 IMER Combicut 3000 Stone Saw by Imer

    6575 IMER Combicut 3000 Stone Saw
    Check Price for 6575 IMER Combicut 3000 Stone Saw

    IMER Combicut 3000 Stone Saw

    • The 4 hp 220v 20 amp single phase electrical motor, combined with the serpentine belt reduction system delivers plenty of cutting power.
    • Two high quality full size slab clamps to ensure the slab is locked down tight.
    • When cutting full-size slabs the protractor is just not enough to accurately position the stone so the COMBI 3000 has an additional fence system that runs the length of the saw that is fully adjustable and locks in place quickly and accurately.
    • The travel bar is built like a suspension bridge, with pre-tensioned bars anchored within it providing great reliability and accuracy, cut within a 1/32″ over 10ft.
    • The saw head also has the ability to chop up and down, plunge cuts up to 4 3/4″ are possible.
    • The laser guide is easy to use, just mark the line of your cut on the slab, line it up with the laser, clamp it down and go!
    • A computer for automated current control ensures that the speed of cut and motor amperage draw are always at optimal levels, the gear drive advancement system is the most reliable made, fast, accurate and chip free cuts are automatic, pass after pass.
    • Tilting to 45 degrees is easy, simply feather the hydraulic control lever and the saw gently rotates and to return the saw to 90 degrees just pump the hand lever 4 or 5 times.

    IMER’S MESSAGE
    “IMER’S COMBI 3000 is an affordable alternative to large stationary bridge saws which require a lengthy set-up procedure and cost thousands and thousands more than the COMBI 3000. It’s easy to set up, simple to operate, yet just as accurate and smooth cutting as the more complicated stationary bridge saws. Built for the start-up shop, or full size shop needing on site fabrication and a versatile complement to their existing shop saw, the COMBI 3000 is the perfect sawing system.”
    Mace T. Coleman Jr.
    President IMER U.S.A.

    .

    Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws

    6830 MK-312 Stone Saw by MK

    6830 MK-312 Stone Saw
    Check Price for 6830 MK-312 Stone Saw

    MK-312 Features

    • Free shipping from the MK factory warehouse
    • Free 12″ MK-62M diamond blade, water pump, & 12″ cutting guide
    • Industrial 3 HP, 230V direct drive motor, engineered for optimum blade shaft RPM
    • Rail cutting-head assembly is supported by 8 double-sealed maintenance-free bearings to ensure accurate and smooth tracking
    • Adjustable miter design permits angle cuts from 0º to 45º with professional precision
    • Die-cast aluminum components reduce weight without compromising structural integrity
    • Lift-out cutting table for easy cleaning
    • Built-in carrying handles for easy transportation
    • One-year limited warranty

    (Shown with optional stand and side table)

    .

    Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws

    6530 Imer Combicut 1000 Stone Saw by

    6530 Imer Combicut 1000 Stone Saw
    Check Price for 6530 Imer Combicut 1000 Stone Saw
  • Combi 1000 Stone Saw 220V was $2899, now only $2599

    • Imer Combi 1000

  • Free shipping from IMER factory warehouse to a commercial address in the lower 48 states
  • Specify motor size when ordering. 1-1/2 hp 120V or 3 hp 220V
    • Order now and receive a free 14″ diamond blade choose from either a 14″ continuous rim porcelain blade or 14″ segmented paver blade free with purchase of Imer Combi 1000
    • The stainless steel cutting surface and jig welded frame are tough, cut 24″ x 24″ pavers on a diagonal, marble and granite stones to 1/32″ accuracy, pre-cast pieces up to 4-3/4″ thickness.
    • Make perfect 45 degree cuts, just tilt the cutting head.
    • Plunge cuts up to 4 3/4″ in depth are quick n’ accurate!
    • The 1-1/2 hp 110 V or 3 hp 220 V motor with a Poly-V belt reduction system delivers plenty of power to the 14″ blade- cut all day long with no loss of power.
    • The support legs slide up and away for easy transport and storage.
    • ABS plastic water pan is made to resist cracks from forming.
    • Don’ t be fooled by cheap imitations using direct drive motors and twin rail systems. This saw has been the undisputed leader of it’s class 6 years running for a reason.
    • The wheel-kit is now included at no charge. One person can take the COMBI 1000 on site, set it up, and get to work!

    IMER’S MESSAGE

    “The COMBI 1000 has quickly become the favorite saw of stone installers, masons, precast fabricators and general contractors all across America. What is driving this popularity-VERSATILITY! Cut 24″x 24″ pavers on a diagonal, marble and granite stones to 1/32″ accuracy, precast pieces up to 4-3/4″ thickness- do it all quickly and accurately with just one saw- the COMBI 1000!”

    Mace T. Coleman Jr.

    President IMER U.S.A.
    .

    Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws

    3023 Felker FRS-51 Rail Saw by Husqvarna

    3023 Felker FRS-51 Rail Saw
    Check Price for 3023 Felker FRS-51 Rail Saw

    Felker FRS-51 Heavy Duty Rail Saws.

    • Free Shipping from Felker factory warehouse to a commercial address in the lower 48 states.
    • The FRS-51 allows you to make plunge cuts and rip cuts
    • The cutting head glides easily on sealed bearings.
    • Free table extension for large materials on left or right side.
    • Built-in handles for ease in transportation
    • Powerful 2 hp, 220 Volts. 8.3 Amps motor
    • 14″ blade capacity, 1″ arbor, 1700 blade RPM
    • Depth of cut: 4.1″, at 45º: 2.4″
    • Length of cut: 51″
    • Weight 317 lbs
    • Saw dimensions 67″ L x 39″ W x 51″ H
    • Four-pieces cutting surface detaches from water pump.
    • Steel construction with powder coated finish resists wear and corrosion.
    • Blade not Included

    .

    Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws
    1. Pages:
    3. 1
    4. 2
     Recent Entries »