Best Door Tools Store

Wacker BTS Gasoline Power Cut-Off Saw 12″ & 14″ Guards

Partner by Husqvarna K960 Concrete Cut-off Saw

Dual charge technology providing higher productivity than other saws in its class.

The Husqvarna K960 is the newest saw with the exclusive Dual Charge engine technology, providing extreme power, low emissions and excellent fuel economy. Higher torque means more usable power and higher productivity than other saws in its class. Able to cut 6″ deep with a 16″ blade, the K960 boasts an impressive 6.1 hp, 94cc air-cooled 2 stroke engine & the market’s best power/weight ratio.

Technical Info

• Active Air Filtration increases life of filters by 3-5 times.
• SmartCarb ensures high power is retained.
• EasyStart provides 50% easier starts.
• DuraStarter reduces wear on the starter.
• Easy-adjust blade guard and reversible cutting arm makes work easier and more productive.
• Sealed transmission reduces wear and the risk of belt slippage.
• Self-lubricating clutch bearings extend product life.
• DualCharge motor provides better power, higher torque and 70% less emissions.
• Blade Sold Separately.

.

ICS 633GC Concrete Diamond Chain Saw.

• Free Shipping
• Diamond concrete chain included.

Improved Features for 2007

• Special crankshaft sealing and air filtration
• Special water resistant electronic ignition
• New leaf spring starter pawl design
• New slurry channel feature eliminates starter clogging
• Better vibration isolation
• More durable crankcase
• Designed for general contractors, construction repair and demolition, there is simply no better saw for the wide range of cutting requirements encountered on the job.
• The 633GC cuts up to 16″ and can make square corners without over cuts.
• Great for irregular shaped holes or concrete pipe, minimizing the patchwork associated with breaking and chipping.

Advantages:

• Versatile and easy to use
• Deep cuts up to 16″
• Irregular shapes
• Square corners without over
• No power pack required
• Safe to operate, no “kickback”
• Wet-cut, no hazardous dust

.

Makita Cut-Off Saw

General Features

• Buy a 14″ saw now and receive a FREE 14″ masonry blade
• Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performance
• Reinforced aluminum blade guard with 70 degrees range of limitless positioning using a marked knob handle
• Improved ignition system with larger flywheel and rare earth magnets for more power
• Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, walls or directly above the ground
• Starter grip and decompression valve located on the same side for faster starting
• On-Off-Choke operating switch on a single lever for operator convenience
• Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
• Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
• Improved exhaust emissions are EPA Phase II compliant while maintaining power and performance
• 50-1 Fuel Mixture, 37oz fuel tank Capacity
• Includes 12″, 14″, or 16″ abrasive wheel, water kit, 2 wrenches, screwdriver
• Shown with optional diamond blade.

.

MK-1270/1495 Gas Concrete Cut-off Saws

• 12″ dry cutting diamond blade and 12″ abrasive wheel included with the MK-1270
• 14″ dry cutting diamond blade and 14″ abrasive wheel included with the MK-1495
• Ideal for concrete, masonry and building materials of all kinds
• High torque transmission reduction system
• Sealed recoil starter to keep out dust
• Multi-stage air filtration system
• Adjustable blade guard
• Decompression valve for easy starting
• Easy to use drive belt tensioning system with external indicator
• Soft rubber inserts in rear handle for operator comfort
• Six-point anti-vibration system
• Includes dry cutting diamond blade, abrasive wheel and 20, 22 and 25.4 mm collar adapters

.

K750 Concrete Saw

The Husqvarna K 750 belongs to the new generation of power cutters developed from the ground up, inside and out. Our unique engine technology, DualCharge™, brings you a highly powerful 3.7 kW engine with low emissions and good fuel economy. It’s simply a cleaner, more efficient engine.

Suitable for:

• Concrete cutting
• Pile cutting
• Minor asphalt work
• Masonry work
• Gas/water/sewer maintenance
• Landscape work

DualCharge

The secret behind the DualCharge™ technology is that you use twin flushing ducts: one for clean air and one for the fuel /air mixture. First, a barrier of clean air presses out the burnt gases, after which the fuel /air mixture is flushed in. The result is a more powerful engine, better fuel economy and a drop in emissions by fully 70%, compared to previous cutter generations. Also, the fuel mixture that passes the main bearings and crank bearings is more concentrated, so it lubricates the engine more effectively. (1) Fuel-air mixture. (2) Clean air. (3) Clean exhaust gases.

Fewer vibrations and less noise

The K750 has an entirely new vibration damping system. The fuel tank, handle and intake system is an entirely new vibration damping unit that gives particularly low handle vibrations. The muffler has been doubled in size and with the large intake system allows the motor to run quieter at higher powers.

New Active Air Filtration

Three separate filter systems. The first system uses the centrifugal force at the cooling fan and separates 80-90% of the dust particles from the intake air. A settling compartment has been fitted where any extra dust settles, which mean the filter stays clean even longer. The intake air then passes through a second stage in the form of an oil impregnated 3-layer adhesive filter that catches any remaining dust particles. The third stage is a traditional paper filter, which represents an extra level of security preventing dust particles from mixing with the intake air. This extends the cleaning interval for the fixed filters 3.5 times (compared to conventional filter systems), which reduces idle time and service costs.

Other Features

• The cutting arm is reversible which lets you cut closer to walls or the ground. The drive belt has a fully sealed trans-mission. This keeps out cutting dust etc, reducing wear.
• EasyStart ensures 50% easier starting by reducing the compression in the cylinder during starting.
• Robust new wet cutting kit, with low water usage.
• Sealed transmission reduces the wear and slippage risk.
• Fuel indicator on the tank shows fuel level, to help avoid unnecessary stoppages.
• Easy-adjust blade guard, replaceable arbor bushing.
• 25% less noise thanks to a larger muffler.

.

Husqvarna K1250 Active Features

Suitable for
• Heavy concrete cutting
• Pile cutting
• Asphalt cutting
• Dismantling work (auto, ship, airplane etc.)
• Pipeline cutting
• Demolition work

Technical Info

• Engine: Air cooled, two cycle engine
• Displacement: 119 cc
• Power: 7.8 hp (5.8 kW)
• Reversible cutting arm for working closer to walls and the ground.

Husqvarna K1250 Active is the world’s largest and mightiest power cutter! A real power package for those who need maximum power to run 16″ blades. Perfect for work on large foundations, robust beams, big pipes or large roof or wall components. Features an incredible 119 cc’s that is surprisingly easy to handle thanks to its good balance and ergonomic design.”

Longer service intervals and less wear with Active Air Filtration

Cutting dust is the enemy of all petrol power cutters since it gets sucked into the engine and wears down piston, cylinder and bearings. Active Air Filtration, a combination of three separate filter systems, is one of the many Husqvarna breakthroughs. The first active step separates the cutting dust from the intake air through centrifugal force. Remaining dust gets stuck in a second filter stage, made from a plastic foam filter, saturated with oil and having a large surface area. A third filter stage, made of pleated paper, provides additional reassurance that the intake air is free from dust. With Active Air Filtration, up to 90% of all the cutting dust is separated already in the maintenance free centrifugal stage.

Maintaining power output for a longer time increases efficiency and reduces service requirements

Husqvarna developed a carburetor with built-in filter compensation, SmartCarb. It maintains a constant air/fuel ratio. This maintains power output even as the filter becomes clogged. There is no need to adjust the carburetor manually. Together, Active Air Filtration SmartCarb maintain high power output longer, reduce filter costs, lower fuel consumption, and reduce exhaust emissions.

Reduced starting cord resistance yields easy, smooth start

A high-compression engine makes you pull hard on the starter cord. With the EasyStart decompression valve, this problem is solved easily and effectively. When you want to start, you just press the button that opens the valve. The EasyStart valve reduces the compression in the cylinder by 50% during the start, which means less wear on the starter assembly.

.