6876 Husqvarna K650 Cut-n-Break Concrete Saw by Husqvarna
Partner by Husqvarna K650 Cut-n-Break With Blades
Partner by Husqvarna K650 Cut-n-Break is Suitable for:
- Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.
- Grooves can be quickly cut to create a channel for up to 3/4″ wide, perfect for water lines and electrical conduit in a single pass.
- The double blade system also aids in faster crack renovation and expansion joint repair.
- Integrated water head kit
Specifications:
- Air cooled, two cycle 4.8hp / 71cc engine
- 22.3 lbs. complete with blades.
- Standard arbor bushing 1” (25.4 mm)
K650 Cut-n-Break General Info
The new K650 Cut-n-Break features an entirely new cutting method for cuts as deep as 16″ (400 mm) at a very economical tooling cost.
The K650 Cut-n-Break has a wide range of applications. It eliminates over-cutting on all types of openings requiring square corners. Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.
The design of the power head is based on one of the most popular cut-off saws in the industry, the K650 Active. This means the engine has all the classic Partner benefits, such as the revolutionary Active Air Filtration™ filter system, the SmartCarb™ carburetor, EasyStart™, sealed transmission and a lot more.
The new K650 Cut-n-Break is easy to use and maintain with low tooling and maintenance costs.
CUT IN STAGES THROUGH WALLS UP TO 16″ (400 mm) THICK.
- Each cut can be made up to 2–1/2″ (65 mm) deep.
- The twin blades form a core in the saw cut.
- The core is simply broken away using the breaking tool that is supplied with the K650 Cut-n-Break.
- When the core has been broken away, repeat the cut until the required cutting depth is achieved. Maximum 16″ (400 mm).
K650 Cut-n-Break Features
- SmartCarb
- Active Air Filtration
- EasyStart
- Efficient cutter
- Easy Adjustable blade guard
- Startercord
- Twin blades
The Cut-n-Break method allows you to cut in stages through walls up to 16″ thick
- Each cut can be up to 2.5″ deep
- Since the cutter has twin blades, a core is formed in the saw cut
- The core can easily be broken off, using the accompanying breaking tool
- When the core has been broken off, continue cutting until the required
depth is reached, Maximum 16″
.