Tag Archives: Edco

ALR-E Reconditioned 5′ Chisel Scaler & Chisel by Edco

ALR-E Reconditioned 5' Chisel Scaler & Chisel
Check Price for ALR-E Reconditioned 5' Chisel Scaler & Chisel
  • Factory Reconditioned Edco ALR-E
  • EDCO ALR-Ergonomic Chisel Scaler
    Free Shipping

    ALR-5 Features:

      Removes:

      • Tiles (vinyl, ceramic, quarry…)
      • Carpeting
      • Roofing materials
      • Fireproofing
      • Rubber coatings
      • Waterproofing
      • Linoleum
      • Insulation
      • Asbestos
      • Mastics
      • Paint build-up
      • Ice

    • Quick-change, hardened steel tool chuck accepts dozens of accessories
    • Available in heavy-duty steel or lightweight aluminum
    • 5′ Long, for floors. Use chisel for removing concrete, floor tile, vinyl tile etc.
    • Scraper blade available for vinyl floors, wall tile, thin set etc.
    • Weight 18 lb, 2200 blows per minute.
    • Operates at 90 PSI. Air consumption 4.5 SCFM.
    • Only 1.5 HP compressor required.
    • 4″ chisel included. One year warranty.
    • .

    8215 2DP Preparation Tool Box by Edco

    8215 2DP Preparation Tool Box
    Check Price for 8215 2DP Preparation Tool Box

    2DP Preparation Tool Box

    6 of each accessory listed are included in this kit. Components Include:

    • 150 Grit Metal Dots (set of 6)
    • 50 Grit Metal-Resin Pucks (set of 6)
    • 120 Grit Resin Pucks (set of 6)
    • 220 Grit Resin Pucks (set of 6)

    * This item is included in our ProPolish II System

    .

    8207 Contrx Systems by Edco Propolish II by Edco

    8207 Contrx Systems by Edco Propolish II
    Check Price for 8207 Contrx Systems by Edco Propolish II

    Contrx Systems by Edco Propolish II

    Features:

    • Counter Rotating Flex Head Disc Assembly with Directional Lock-In Accessory System:
    • Patented Click-In Accessory Housing
    • 5 hp, 230 Volt TEFC Motor w/ 385 Rpm Disc Speed
    • Hand-Crank Surface Leveling Fork Assembly: (Light Grinding, Heavy Grinding & Transport Modes)
    • 4 (40 lbs.) Removable Weights & Lifting Bail
    • 23” Working Width with Velcro Accessory Holders
    • Electrical Cord and Vacuum Hose Holder
    • Flip-Up and Wide “T” Handle Assemblies
    • Non-Marking Poly Wheels

    Includes

    • ProPolish II Dual Head Polisher
    • Prep Kit (6 each) – 150 Grit Metal Dots, 50 Grit Metal-Resin Pucks, 120 Grit Resin Pucks, 220 Grit Resin Pucks
    • Polish Kit (6 each) – 400 Grit Resin Pucks, 800 Grit Resin Pucks, 1800 Grit Resin Pucks
    • CONTRx Densifier (5 Gallon)
    • CONTRx Shield (1 Gallon)
    • CONTRx Dye Sprayer (2 Gallons)
    • CONTRx ProPolish Applications Kit – Gloves, Goggles, Mask, Booties, Shield Applicator, Diamond Pad Removal Tool

    .

    8208 Contrx Systems by Edco Propolisher I by Edco

    8208 Contrx Systems by Edco Propolisher I
    Check Price for 8208 Contrx Systems by Edco Propolisher I

    CONTRx ProPolisher I with exclusive patented multi-accessory 12” head. Features:

    • 5 hp, 230 Volt Soft-Start, TEFC Smart Motor
    • 610 RPM Disc Speed – High Speed Setting
    • 300 RPM Disc Speed – Low Speed Setting
    • Hand-Crank Surface Leveling Fork Assembly
    • Flex Head Disc Assembly with Directional
    • Lock-In Accessory System
    • Patented Click-In Accessory Housing
    • 6 (15 lb.) Removable Weights & Lifting Bail
    • 12-1/2” Working Width
    • Low amp draw – runs on a 6000-Watt generator
    • Flip-Up and Wide “T” Handle Assemblies
    • Non-Marking Poly Wheels

    .

    8209 CONTRx Wet Vac w/ 29 inch wide squeegee attachment by Edco

    8209 CONTRx Wet Vac w/ 29 inch wide squeegee attachment
    Check Price for 8209 CONTRx Wet Vac w/ 29 inch wide squeegee attachment

    CONTRx Wet Vac w/ 29 inch wide squeegee attachment

    Features:

    • Bypass motor system
    • Low-amp start-up system
    • Impact resistant structural foam body
    • Operates on rolling handcart with tilting disposal system
    • 12-Gallon capacity collection bin

    VACUUM SYSTEMS ARE NOT INCLUDED WITH THE POLSIHING SYSTEMS, but a fine dust collection vacuum system is strongly recommended to go along with your ProPolish I or II Dry System to control dust during the Preparation and Polishing Phases of your polishing job. You’ll also need a CONTRx vacuum system to clean the surface between each step of the system which is critical in achieving the best results.

    .

    8210 CONTRx Wet Vac w/ 16 inch hand held wand kit by Edco

    8210 CONTRx Wet Vac w/ 16 inch hand held wand kit
    Check Price for 8210 CONTRx Wet Vac w/ 16 inch hand held wand kit

    CONTRx Wet Vac w/ 16 inch hand held wand kit

    Features:

    • Bypass motor system
    • Low-amp start-up system
    • Impact resistant structural foam body
    • Operates on rolling handcart with tilting disposal system
    • 12-Gallon capacity collection bin

    VACUUM SYSTEMS ARE NOT INCLUDED WITH THE POLSIHING SYSTEMS, but a fine dust collection vacuum system is strongly recommended to go along with your ProPolish I or II Dry System to control dust during the Preparation and Polishing Phases of your polishing job. You’ll also need a CONTRx vacuum system to clean the surface between each step of the system which is critical in achieving the best results.

    .

    8211 CONTRx 120 Dry Vac System by Edco

    8211 CONTRx 120 Dry Vac System
    Check Price for 8211 CONTRx 120 Dry Vac System

    CONTRx 120 Dry Vac System

    Features:

    • Industrial Bypass dual-motor vacuum system
    • 3-Stage filtration (Microtex filter, Permatex filter & Bag filter)
    • 4-1/2 Gallon dust collection capacity
    • 10’, 2” Diameter hose include

    VACUUM SYSTEMS ARE NOT INCLUDED WITH THE POLSIHING SYSTEMS, but a fine dust collection vacuum system is strongly recommended to go along with your ProPolish I or II Dry System to control dust during the Preparation and Polishing Phases of your polishing job. You’ll also need a CONTRx vacuum system to clean the surface between each step of the system which is critical in achieving the best results.

    .