Best Door Tools Store

Imer Masonry 700 28″
Stone, Masonry and Precast Saw

• Cutting Blocks just got a lot easier!
• The Masonry 700 allows the operator to cut 8″ and 10″ blocks in a single pass without the added hassle and effort of a foot pedal.
• The powerful 7.5 hp. electric motor combined with the 28″ blade delivers 11″ of cutting depth.
• Whip it through blocks, pavers, fieldstone, and pre-cast concrete with ease.
• The frame and cutting tray are hand fabricated heavy duty steel, while the ergonomic design allows the operator to load up the saw with a lot less effort than our competitors’ saws.
• Cut “mucho màs” material in a day… Guaranteed!
• Should it be necessary to make a plunge cut just grab the control handle and ease the blade into the material.
• The cutting head pivots on sealed bearings, making plunge cuts is smooth and controlled.
• Blade Diameter 28″, arbor 1″
• Max. cutting length 18″ / (w/plunge cut) 27″
• Max. cutting depth 11″
• Motor rating 7.5 h.p. 220 3ø
• Blade speed 1700 r.p.m.
• Weight (crated) 440 lbs. (495 lbs.)
• Water pan capacity 24 gals. with self-Priming centrifugal pump flow 3 g.p.m.
• Length 60″ x Width 33″ x Height 62″

.

Stow Trak 14in Masonry Saw

Powerful, rugged saws for clean, accurate cuts. When cutting brick, block, stone, slate or tile, Stow masonry saws perform to the highest of standards. Engineered for performance, the rigid design minimizes vibration. Designed for easy maintenance, these saws will last for years and continue to provide dependable and reliable service.

• The Trak 14 sets up in seconds, and the mounted carrying handles make it easy to move from job-to-job
• Rugged aluminum conveyor cart for optimum stability and travel
• Open back design permits orientation of cutting large materials
• Balance easy tilt cutting head
• Mounted carrying handles
• Rigid Steel Frame minimizes vibrations and assures accurate cutting
• Unit breaks down into two separate pieces for quick and easy assembly.
• Dimensions: 43″x33″x27″
• Stand sold separately item 7786

.

Stow Trak 20 Masonry Saw

Powerful, rugged saws for clean, accurate cuts. When cutting brick, block, stone, slate or tile, Stow masonry saws perform to the highest of standards. Engineered for performance, the rigid design minimizes vibration. Designed for easy maintenance, these saws will last for years and continue to provide dependable and reliable service.

• Rugged oversize aluminum conveyor cart for maximum material stability and easy travel
• Classified as an industrial grade block saw, these models offer high production performance on job sites, building supply houses and brick/block plants.
• Stay-level blade guard for operator safety
• Rigid frame minimizes vibrations and assures accurate cutting
• Accurate screw thread and foot pedal control.
• 2 ways fork lift pockets.
• Ergonomic pull handle
• High volume water pump.
• Three phase motor available call for pricing.
• Dimensions 61″x25″x55″
• Blade not included

.

• Free Shipping from IMER factory warehouse
• 14″ Blade capacity, 1″ arbor.
• Motor 2850 Rpm, Blade 2150 Rpm.

MS 350SC

• 1.5 hp motor runs on 110 volts, 15 amps
• Head tilts to 45 degrees
• Optional 2.8 hp single phase 220 Volts motor (call for pricing)

MS 350F

• 1.5 hp motor runs on 110 volts, 15 amps
• Fixed Head
• Lighter than MS 350SC

MS 350G

• 5.5 hp Honda motor with oil bath clutch engine
• Gear box drive means less vibration and maintenance.

Features

• 16″ x 16″ Heavy Duty table, cuts 4 bricks at once
• Rigid single arm motor mount allows for cutting large pieces
• Built in stand with wheel kit
• Low voltage coils protect the vital components such as the on/off switch and motor from low or inadequate power sources.
• Hi-torque motors and serpentine drive belts ensure fast and smooth cutting performance
• Blade guards and panic stop buttons that keep safety inspectors happy
• The cutting tray rides on 1″ square steel bars that are fully adjustable, these saws remain accurate all the time!
• The cutting tray rollers keep the tray in place at all times the tray will not wheelie up n’ down as you pass a block through the blade
• A plunge stop is designed into the saw, the blade cannot cut into the cutting tray
• The box steel frames are light and very rigid, this allows for the single arm design, pass extra wide and extra long materials with no problem

.

MK-2000PRO Series Masonry Saw

• Free stand, rip guide, and 14″ BX-30 general purpose wet/dry diamond blade
• Call for special coupon savings on 2 hp electric and 5 hp gas saws
• Free shipping from MK warehouse, to lower 48 states; We will charge applicable sales tax, for a factory direct drop-ship In the state of California
• 5″ depth of cut
• Precision engineered, cast-aluminum structural components & jig-welded steel frame assembly
• Stay level blade guard gives 180 degree coverage at all times
• Drop down blade shaft is built with sealed, permanently lubricated, heavy-duty bearings
• Open-back design allows for material up to 16″ long to be cut
• Recoil spring return cutting head
• Cast aluminum blade guard with stainless steel water tubes that will not bend or rust
• Adjustable water supply for maximum blade protection
• Dimensions: Length 34″x Width 24.5″x High 41.5″.
• Blade rotation 3450 Rpm.
• One-year limited warranty

MK-2000 Pro Electric Saw Features

• Professionally engineered, thermally protected powerful “dual-voltage” AC induction motor
• Shaft system utilizes dual “V” belts and precision machined pulleys
• Convenient toggle switch to change motor from 115 Volts and 230 Volts
• Includes a powerful, fully submersible electric water pump

MK-2000 Pro Gas Saw Features

• Reliable and powerful 5 1/2 HP Honda or 6 HP Robin gas engine
• Shock-absorbing engine mounts for smooth operation
• Shaft system utilizes Micro “V” belts and precision machined pulleys
• Belt driven, self-priming centrifugal water pump on gas series saws

7.25% sales tax on orders shipped to residence of CA

.

MK-5009T 9 hp Series Masonry Saw

• Includes 20″ blade guard. Call for pricing on 14″ & 24″ blade guards
• Block saw that will slice through an 8″ x 8″ x 16″ concrete block in a single pass.
• Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required.
• The MK-5009 series is engineered with a host of innovative operator conveniences to boost efficiency, increase productivity, and enhance safety.

Model	MK-5009T 230V	MK-5009T 460V
Motor	3 Phase 60Hz	3 Phase 60Hz
Motor rpm	1725 rpm	1725 rpm
Shaft rpm (14″ Blade)	2700 rpm	2700 rpm
Shaft rpm (20″ Blade)	1925 rpm	1925 rpm
Shaft rpm (24″ Blade)	1540 rpm	1540 rpm
Max. Blade Capapcity	24″	24″
LxWxH (inches)	53″ x 25.5″ x 63″	53″ x 25.5″ x 63″

• Free shipping from MK factory warehouse to a commercial address in the lower 48 states
• The cutting head is controlled by a foot pedal so operator’s hands are free and safe
• Stay level blade guard with flange safety cover gives 180 degree coverage at all times as an extra safety protection factor
• 20″ blade capacity gives 8″ depth of cut
• 38-1/2″ table travel with 22″ cutting length
• Open-back design allows larger material to be easily rip cut
• Adjustable water supply for maximum blade protection
• One-year limited warranty
• Model MK-5009T: 240V/60Hz three phase 9 hp motor
• Model MK-5009T: 460V/60Hz three phase 9 hp motor
• 8% sales tax on orders shipped to residence of CA

.

MK-5005 Series 5 hp Masonry Saw

• Precision screw feed mechanism allows the cutting head to be easily raised or lowered to the precise cutting depth required
• Stay level blade guard cover gives 180º coverage at all times
• Open-back design allows for material up to 20″ long to be cut
• Conveyor cart built from heavy-duty cast aluminum
• 3 phase saws are equipped with GE NEMA 1 starters in NEMA 12 enclosure
• Adjustable water supply for maximum blade protection
• Built-in tie-downs for safer saw transport
• Ergonomically designed handle for reduced operator fatigue
• Spherical rod ends are used to maintain proper cutting head alignment
• Gas saw engine attachment is via four vibration isolation mounts
• Gas saws come with belt driven, self-priming centrifugal water pumps that can be disengaged for dry cutting
• Heavy-duty built-in forklift brackets allow lift to approach from the front or either side of the saw
• One-year limited warranty

Model	MK-5005S	MK-5005T	MK-5005T
Motor	230V 60Hz	230V 60Hz 3 Phase	460V 60Hz 3 Phase
Motor RPM	1,725	1,725	1,725
Shaft RPM (14″ Blade)	2,700	2,700	2,700
Shaft RPM (20″ Blade)	1,925	1,925	1,925
LxWxH (inches)	53″ x 26″ x 63″	53″ x 26″ x 63″	53″ x 26″ x 63″

.

Imer Blockhead Masonry 500

The Masonry 500 block head delivers fast, accurate, vibration free cutting performance.

• Free Shipping from IMER factory warehouse
• 16″ x 16″ Heavy Duty table has room to cut 2 – 8″ blocks at one time
• Enough tray travel to lock head and push material eliminates pull down cutting
• 9 hp Honda motor with oil clutch and single ribbed belt is vibration free
• Available with 5 hp 220V Electric motor
• Emergency stop switch with in easy operator reach
• The Stand is built into the frame (14″ and 20″ saws) for stable and secure cutting
• Honda gas motors with centrifugal clutch eliminates the need for jack shafts and pulleys
• Electric 110 Volts models are designed to run anywhere with ease; breakers won’t trip on startup!
• Locking stainless steel protractor comes standard with all saw models
• Removable poly trays for easy cleanup
• Cut blocks the 12″ way to cut out webs for bond beams

Accuracy

• The cutting tray roller system is the best in the industry.
• The two 1″ steel guide bars provide great accuracy and are fully adjustable.
• This saw will remain accurate for years to come!

Versatility

• The single arm frame design allows the passage of large or irregular materials.

.

MK-2000 Series Masonry Saw

• Call for special coupon savings
• We will charge applicable sales tax, for a factory direct drop-ship In the state of California
• Open-back design allows for material up to 16″ long to be cut
• One-year limited warranty

MK-2000 Electric Saw Features

• Professionally engineered, thermally protected, dual-voltage motor
• Single voltage motor also available
• Convenient toggle switch to change motor from 115V and 230V

MK-2000 Gas Saw Features

Shock-absorbing engine mounts for smooth operation

Shaft system utilizes Micro “V” belts and precision machined pulleys

Belt driven, self-priming centrifugal water pump on gas series saws

.