Best Door Tools Store

Buy a Target by Husqvarna .375in Millenium Diamond Blades and Save

Target by Husqvarna Millennium .375″ Narrow Notch Diamond Blades

• Suitable for extra long life on abrasive asphalt- standard undercut retardant
• All 20″ blades or larger have recessed segment undercut protection.
• Application: Cured Concrete.
• Job Size: Large.
• Horsepower Range: 35-85 hp.
• Equipment types: Concrete Saws
• Cutting method: Wet cutting
• Bonding/Weld type: Laser weld
• Arbor: 25.4 mm / 1 inch
• Diamond depth: .375 inch

.

Target by Husqvarna Millenium .315″ Narrow Notch Diamond Blades

• Suitable for extra long life on abrasive asphalt- standard undercut retardant
• Application: Cured Concrete.
• Job Size: Large.
• Horsepower Range: 35-85 hp.
• Equipment types: Concrete Saws
• Cutting method: Wet cutting
• Bonding/Weld type: Laser weld
• All 20″ blades or larger have recessed segment undercut protection.
• Arbor: 25.4 mm / 1 inch
• Diamond depth: .315 inch

.

Banner Line BLUE 200B Series Features

• Suitable for general purpose cutting of soft to medium-hard aggregates with light steel reinforcing
• Application: Cured Concrete
• Job Size: Medium to Large
• Horsepower Range: 5-65 hp
• Equipment types: Concrete Saws
• Cutting method: Wet cutting
• Bonding/Weld type: Laser weld
• Arbor: 25.4 mm / 1 inch
• Diamond depth: 0.315 inch
• 48″ & 60″ available Call for pricing

.

Target by Husqvarna Banner Line BLUE 300B Diamond Blade

• Suitable for cutting soft to medium-hard aggregates. Also for cured joint widening
• Application: Cured Concrete
• Job Size: Medium to Large
• Horsepower Range: 5-65 hp
• Equipment types: Concrete Saws
• Cutting method: Wet cutting
• Bonding/Weld type: Laser weld
• Blade Shaft Diameter: 25.4 mm / 1 inch
• Diamond depth: 0.315 inch
• Segment Height: 0.390 inch
• Segment Base: 0.075 inch
• Other sizes available. Call for pricing

.

Target by Husqvarna Banner Line Gold 150B Series Diamond Blade

• Suitable for cutting hard to critically hard aggregate, with light to medium steel reinforcing
• Application: Cured Concrete
• Job Size: Medium to Large
• Horsepower Range: 5-65 hp
• Equipment types: Concrete Saws
• Cutting method: Wet cutting
• Bonding/Weld type: Laser weld
• Arbor Size: 25.4 mm / 1 inch
• Diamond depth: 0.315 inch
• Other sizes available. Call for pricing

.

MK-505 Wet Concrete Diamond Blade

• Premium grade blade for cured concrete
• Job Size: Small to medium
• Horsepower Range: 8-20 hp
• Equipment types: Circular saw, concrete saw (small), masonry
• Cutting method: Wet cutting
• Arbor: 1″ / 20mm
• Rim Height: 10 mm
• To reduce undercutting when wet cutting with a dry blade, be sure to minimize blade / sub-base contact

.

Husqvarna K650 Cut-n-Break Diamond Blade Set

• Dual 9″ Diamond concrete Blades
• Depth of Cut: 2-1-/2″ per pass with a maximum of 16″

Hard Material

• Such as river rock, granite, heavily reinforced concrete, mica, precast panels, marble, quartz, trap, rock, flint rock, and concrete (over 6,000 psi tensile strength.

General Purpose

• For materials such as concrete (less than 6,000 psi tensile strength, lightly reinforced concrete, concrete pipes and other precast. Provides good cutting speed and good blade life for general concrete.

Abrasive

• Designed for concrete block, green concrete, limestone, lava rock, slate rock, shale, and sandstone. Suitable for cutting through very abrasive, softer material. Excellent speed and life in all abrasive concrete.

.