Best Door Tools Store

Kraft Magnesium Straight Edge

• 1″ x 4″ Magnesium straight edge.
• Magnesium is 30% lighter than aluminum.
• Magnesium is also more rigid than aluminum!
• This makes them tough, yet light.

.

Dynapac BV30 Screed Blades

Floor-finishing with the right tools!

Features

• Interchangeable bottom plates make this light finishing beam versatile
• 6 different working widths: 6ft, 8ft, 10ft, 12ft, 14ft, 16ft
  (1.8, 2.4, 3.0, 3.6, 4.8m)
• Made of non-corrosive aluminum alloy
• Perfectly balanced to achieve even floors
• Provide good consolidation of the concrete and an even surface.

.

Wacker Wet Screeds Blades

• Wet screed offers both reliable performance and operator comfort
• WACKER’s wet screed can fit the demands of every jobsite with a variety of blade lengths
• Each unit is designed to fit the demands of every operator.
• Unique twin handle system is fully height and angle adjustable offering maximum operator comfort.
• In addition, two isolators reduce handle vibration to the operator.
• The squeeze-grip handle is also fold-able for easy transport and storage.
• 4ft, 6 ft, 8 ft ship UPS, longer sizes ship by truck.

.

Belle Group Stream Screed

Features

Straight Drive Shaft for the highest reliability

Adjustable centrifugal force force

Adjustable handle height for operator comfort

Extra rigid, structurally engineered, extruded aluminum beams

5 different beam lengths to suit your application

.

5 different beams to suit your application

• 8 ft
• 10 ft
• 12 ft
• 14 ft
• 16 ft (2 drive units recommended for 16 ft)

.

Northrock Pro 3200 Series Power Screed

• Eccentric design with 60% more power for high productivity and ease of use.
• Wrap-around frame design provides greater strength and better isolation.
• Patented magnesium blades cur and roll the concrete in front of the screed, reducing the need for grading while the ten inch wide shoe promotes flatter floors.
• Available with blades form 4 ft to 14 ft for one man operation and 16 ft to 22 ft for two man operation.
• 31cc. 4 cycle Honda gasoline engine power a well engineered and field proven eccentric system to frequencies up to 6000 Vpm.
• This system is mounted on an angle to the blade, allowing the vibration to be transmitted both horizontally and vertically.
• The combination of high frequency combined with the angled eccentric system design promotes smoothness and rapid consolidation of the mix.
• Large rubber shock mounts direct vibrations away from the operator and down into the mix.
• A strong, light weight frame allows the blades to be changed in seconds while the pull handles adjusts quickly to the operators height for optimum productivity.
• Power unit and frame weigh in at only 28 lbs making the system easy to maneuver and transport around the site.
• Max bar length 12 ft. per power unit.
• 10 ft to 22 ft bars ships by truck freight.

.

DSGPULW Multiquip Duo Screed

The DuoScreed sports a unique blade profile that enables just one operator to quickly and accurately strike off concrete floors using a single blade for both form-to-form and wet screeding.

Multi-quip’s DuoScreed utilizes a unique blade profile that enables one person to strike-off concrete floors.The screed’s vibratory action embeds aggregate and reduces air voids, producing a strong dense slab, while eliminating the strenuous, time consuming labor of manual screeding

• Flexible drive shaft– Simple but durable power unit utilizes a maintenance-free flexible drive shaft
• Fingertip throttle control– Ergonomically designed to provide easy RPM adjustment
• Eight blade widths-Ranging from 6ft to 20 ft
• Lightweight blade construction– One-piece extruded aluminum, less than two pounds per linear foot
• Easy to use-Highly maneuverable around pipes or obstructions without marring slab surface
• Unique reversing blade-Power unit is easily rotated 180 degrees to allow form-to-form or wet screeding
• Adjustable control handle-Customizable for operator height and comfort and sports a convenient fingertip throttle control
• Portable design– The blade is quickly removed without tools; handles fold for storage
• Honda powered-Honda GX-35SAT 1.5hp four stroke gasoline engine
• DSB550 and DSB600 are a combination float and screed blade
• Power unit and screed blades are sold separately

.