The Best Mixers & Drills of 2017, Top-Rated, High Quality Mixers & Drills Online: Best Door Tools Store

Category: Mixers & Drills

QEP Power Mixer With Paddle

This lightweight, impact resistant power mixer was designed with the professional installer in mind.

Raimondi Iperbet Power Mixer

Free Shipping
For mixing tile adhesives, thinsets, mortar for plasters, quartz plasters, concrete and more.
1/2 hp 110V motor for mixing grout or thin set at a rate of 55 Rpm.
Gear ratio of motor to bucket 25 ÷ 1.
Supplied with two; 12 gallon (45 Liters) buckets.
Fixed paddle rotating bucket, better safety and allow operator to check the mix while mixing.
You can mix 50 to 100 lbs dry powder per load.
Weighs only 88 lbs.
Dimensions 21″ x 25″ x 32″
Two wheels and well-positioned handle makes it easy to complete all your mixing needs with less fatigue on the worker.
Supplied with: two buckets (45 lt/12 gal), standard mixing blade, hex key, user and maintenance manual

Stow Paddle Mixer CX600HF

If you’re questioning the cost of the tool, expect to buy three or four drills before ever having to replace this Stow Collomix Mixer
2 Speed Variable range 0 – 490 & 0 – 620 Rpm.
When low and high variable speed range are important.
Paddle, specially designed for tile adhesives, building mortars, thin set, cement, plaster, etc.
120 Volts, 10.4 Amp, ideal for mixing loads of up to 17 gallons
Ergonomic, comfortable upright holding position for better body posture, minimizing strain
Complete bucket mix…none left at the bottom of bucket (No waste)

Stow Paddle Mixer CX300HF

If you’re questioning the cost of the tool, expect to buy three or four drills before ever having to replace this Stow Collomix Mixer.
2 Speed Variable range 0 – 470 & 0 – 890 Rpm.
When low and high variable speed range are important.
Paddle, specially designed for tile adhesives, building mortars, thin set, cement, plaster, etc.
120 Volts, 7.0 Amp, 1.1 hp, ideal for mixing loads of up to 10 gallons
Ergonomic, comfortable upright holding position for better body posture, minimizing strain
Complete bucket mix…none left at the bottom of bucket (No waste)

CX100HF Collomix Mixer

Single speed range 0 – 790 Rpm.
Heat-treated, hardened steel gears for long life expectancy.
If you’re questioning the cost of the tool, expect to buy three or four drills before ever having to replace this Stow Collomix Mixer.
Easily control the RPM with the variable speed control trigger right at your fingertips.
Variable speed allows you to start your mix at a low rpm, keeping your product in the bucket
An economical choice to replace the 1/2″ mixing drill for mixing in 5 gallons buckets
Paddle, specially designed for tile adhesives, building mortars, thin set, cement, plaster, etc
Ergonomic, comfortable upright holding position for better body posture, minimizing strain
Complete bucket mix…none left at the bottom of bucket (No waste)

QEP 5/8″ Variable Speed Mixing Drill.

Rugged, heavy duty mixing drill has been designed with many extras for the professional installer

Larger chuck (5/8″) accommodates a wider range of bits, making the 21650 a more versatile mixer.
Heavy-duty 6 Amp motor.
0-600 RPM variable speed switch reduces air bubbles when mixing thinset and grout
High torque double reduction gears provide increased torque for mixing the thickest mortars.
D handle rotates 360 degrees for greater control.
Weight 12.8 lbs.
100% die cast aluminum housing protects internal components.
Side handles for comfort and maximum mixing leverage.
Includes blow mold case

DW130V Variable Speed Mixing Drill.

Variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling
Industrial quality chuck.
Heavy-duty 2-stage gearing.
D handle rotates 360 degrees
Weight 7.5 lbs. (3.4 kg) increases user productivity and decreases user fatigue
9.0 AMPS, 120V motor provides enough power for any job site application.
0-550 RPM variable speed reversing switch avoids air bubbles entrapment.
100% ball & needle bearings.
Reversible, dust sealed switch
Soft grip handle provides superior comfort and ergonomics
2-position rear spade handle and 3-position side handle gives greater control for all drilling and mixing applications.

Rubimix-25N Mortar Mixer

Free shipping from Rubi factory warehouse.
Electric mixers for mixing up to 55 lb (25 kg) of cement mortar (adhesive, facing cement, and more)
Blade speed: 60 RPM
Large 8.8 gal (40 liter) bucket
Integrated gearbox design for better performance in the transmission
Compact and easy to transport
Motor: 1.2 hp(.88 kW) motor
Weight: 66 lb (30 kg )

6013BR 1/2″ Mixing Drill

Industrial quality chuck.
Heavy-duty 2-stage gearing.
D handle rotates 360 degrees
Weight 6.2 lbs, 6.3 Amps, 550 Rpm.
Ball bearing construction for long tool life and smooth operation
Heavy duty industrial 1/2″ drill chuck for positive bit retention and accurate drilling
Handy chuck key is retained in handle to prevent loss
100% ball & needle bearings.
Reversible, dust sealed switch.
Drills to 1/2″ in steel
1-3/8″ in wood
Rocker type switch for easy one-handed forward or reverse operation.