Category: Kor-IT

8289 Kor-It INC K-150 KOR-Mobile Trailer System by

8289 Kor-It INC K-150 KOR-Mobile Trailer System
Check Price for 8289 Kor-It INC K-150 KOR-Mobile Trailer System

Kor-It INC K-150 KOR-Mobile

The KOR-Mobile systems can be used for trailer-mounted drill and/or remote drilling from the trailer, depending on your application needs.
Get the job done faster and reduce job costs

  • Free shipping
  • Near-zero setup time
  • Longer bit life with very stable drilling platform
  • Drills faster with a high horsepower gasoline or hydraulic system
  • Hydraulic assisted machine lift, for single-handed removal and replacement of the drill head for remote drilling applications
  • 5 ft. by 8 ft. steel construction trailer, equipped with electric brakes and pre-wired for brake and tail lights
  • Quick set up and tear down
  • Drill faster with gasoline motors (6.5 and 15 HP)
  • Drills 3-4 times faster than electric drill machines
  • Minimize lane closure/traffic control requirements
  • Increased bit life with very stable drilling platform
  • Easy removal from vehicle when not in use
  • Lockable, weather resistant toolbox for securing all your drilling accessories.

K-151-G6 KOR-MOBILE Trailer System

  • 6.5 HP motor, 60 gallon water tank and 12 VDC pump
  • 6.5″ diameter core bit capacity, 18″ hole depth, 4’ x 6’ trailer pre-wired with tail lights.

K-150-G15 KOR-MOBILE Trailer System

  • 15 HP motor electric starter with battery & charger, 200 gallon water tank and 12 VDC pump
  • 16″ diameter core bit capacity, 24″ hole depth, , 5’ x 8’ trailer pre-wired with tail lights and electric brakes

.

8302 Kor-It KT77 The Piperider – Heavy-Duty Pipe Tap Core Drill Machines by

8302 Kor-It KT77 The Piperider - Heavy-Duty Pipe Tap Core Drill Machines
Check Price for 8302 Kor-It KT77 The Piperider - Heavy-Duty Pipe Tap Core Drill Machines

Kor-It KT77 “The Piperider” – Heavy-Duty Pipe Tap Core Drill Machines

The KT77 is designed for both hard-to-reach and standard drilling applications. They have an ideal drill stand for pipe-, floor-, wall- and ceiling-mounted drilling.

Years of dependable and easy-to-use service

  • Flexible, multipurpose, chain-strap or anchor bolt drilling
  • Smooth, heavy-duty lead screw driven carriage assembly
  • Multiple power sources available
  • Rust-resistant, lightweight aluminum construction
  • Easy alignment for accurate hole drilling

KT-77-G25 System

  • For drilling at any orientation
  • Standard core-up to 7-inch diameter (6-inch, standard)
  • Carriage travel up to 22 inches (12-inch, standard)
  • Complete chain-strap and anchor bolt drilling systems
  • Compact and lightweight for drilling in limited space area (2-1/2 inch square column)
  • Drill stand, 4-cycle, 2.5 hp gasoline motor
  • Throttle control for 100 to 1000 Rpm
  • Chain-strap/anchor bolt base
  • Chain & sprocket drive
  • 6″ diameter holes
  • Precision water swivel and chain set

KT-77-A System

    For any orientation drilling up to 8-inch diameter cores
  • Carriage travel up to 22 inches (12 inch, standard)
  • Complete chain-strap and anchor bolt drilling systems
  • Compact and lightweight for drilling in limited space area (2-1/2 inch square column)
  • Drill stand, high-performance pneumatic or hydraulic motor
  • Adjustable flow control for 100 to 1000 bit Rpm
  • Chain-strap/anchor bolt base
  • Chain and sprocket drive
  • 6″ diameter holes
  • Precision water swivel
  • Chain-strap set

KT-712-A System

  • For any orientation drilling up to 12-inch diameter cores
  • Carriage travel up to 22 inches (12 inch, standard)
  • Complete chain-strap and anchor bolt drilling systems
  • Compact and lightweight for drilling in limited space area (2-1/2 inch square column)
  • Drill stand, high-performance pneumatic or hydraulic motor
  • Adjustable flow control for 100 to 1000 bit Rpm
  • Chain-strap/anchor bolt base
  • Chain and sprocket drive
  • Precision water swivel
  • Chain set

.

8303 Kor-It K-700 Bucket/Skid Steer Mounted Core Drill Machines by

8303 Kor-It K-700 Bucket/Skid Steer Mounted Core Drill Machines
Check Price for 8303 Kor-It K-700 Bucket/Skid Steer Mounted Core Drill Machines

Kor-It K-700 Bucket/Skid Steer Mounted Core Drill Machines

  • Free shipping

Reduces Job Costs

  • Minimizes time required for each job
  • Longer bit life with stable drilling platform
  • Drill faster with high horse power hydraulic systems

Independence in the field with skid-steer hydraulic powered bucket mounted drilling system

  • Stand-alone system, no additional power supplies required
  • 60 gallon polyethylene horizontal water tank reservoir and 12 VDC pump

Years of use and dependable performance with stable drilling environment

  • Heavy duty, 3″ precision ground column and precision machined roller carriage assembly
  • Carriage travel : 36-inch
  • Designed for large and small holes
  • Smooth precision roller carriage system

Flexible drilling system

  • Easy removal bucket system from skid-steer for maximum flexibility
  • Accurate hole positioning and easy alignment of drill platform
  • Up to 48″ diameter core bit capacity
  • Hydraulic powered, Semi-Auto feed Roller carriage, up to 72 inch bit diameter capacity, 60 gallon water tank, 12 VDC water pump On Request
  • .

    8300 Kor-It KV-30 & KV-55 Gasoline & Electric Powered Kor-Vac Systems by

    8300 Kor-It KV-30 & KV-55 Gasoline & Electric Powered Kor-Vac Systems
    Check Price for 8300 Kor-It KV-30 & KV-55 Gasoline & Electric Powered Kor-Vac Systems

    Kor-It KV-30 & KV-55 Gasoline & Electric Powered Kor-Vac Systems

    All KOR-VACTM Systems Include

    • Free shipping
    • Gain Powerful Suction; pick up slurry quickly and easily: Reduce job time – 100-inches of water lift with 122 CFM volume
    • 2 Sizes to fit most any job : 55-Gallon and 30-Gallon drum sizes
    • Easy-to-move Lo-Profile Drum Cart :
      Easy loading and unloading – just tilt drum to load or unload
      Easy positioning – Swivel caster and large diameter wheels
    • Easy waste removal – Large 2-inch dump valve
    • Turbine protection – Extra Large Wet/Dry Filter, keeps out dust and debris, rises easily with water
    • Safety First – Auto Shut-Off when drum is full
    • Rust resistant, durable attachments-10-Foot hose, two-piece chrome plated wand and 14-inch lightweight aluminum vacuum nozzle included

    Gasoline Powered KOR-VACTM Systems Includes

    • Super Reliable 1.6 HP, 4-cycle gasoline motor
    • Easy start – usually starts on the first pull
    • Easy Use – Uses standard gasoline, NO MIXING
    • Less equipment needed – No generator or electrical extension cords required
    • Less maintenance – More reliable than electric “Shop Vac” systems

    Electric Powered KOR-VACTM Systems Includes

    • Super Reliable 120 Volt 10 Amp Electric Motor
    • Easy start –Just a flick of a switch
    • Easy Use
    • Recommended Generator – 1500 Watt (minimum)
    • Less maintenance – More reliable than conventional “Shop Vac” systems

    .

    8295 Kor-It K-401 Mobile Core Drill Machines by

    8295 Kor-It K-401 Mobile Core Drill Machines
    Check Price for 8295 Kor-It K-401 Mobile Core Drill Machines

    Kor-It K-401 Mobile Core Drill Machines

    • Free shipping

    K-4xx Standard Package Includes

    • Variable Rpm: 300 to 1100 bit Rpm
    • Water swivel
    • Power system
    • Drill stand

    Get the job done faster and reduce job costs

    • Quick set up and tear down
    • Drill faster with gasoline motors (6.5 & 15 hp), hydraulic (21 to 48 hp, per customer requirement) or pneumatic (90cfm/80 PSI)
    • Minimize lane closure/traffic control requirement
    • Increased bit life with very stable drilling platform
    • Easy removal from vehicle when not in use

    Gain independence in the field

    • Stand-alone gasoline system with optional electric start requires no additional power supplies

    Obtain years of use and dependable performance with stable drilling platform

    • Heavy-duty, dual-precision ground columns and tenz-alloy precision machined carriage assembly
    • Smooth-precision ball feed screw system
    • Capable of handling large and small hole drilling

    Flexible drilling system

    • Carried and/or mounted on a trailer, pickup or van
    • Accurate hole drilling positioning and easy alignment of drill platform with 4″ Delrin wheels
    • 6″ & 8″ diameter core bit capacity and variable weight : 285 lbs. to 300 lbs.

    K-401-G6: 6.5 hp gasoline power, 6″ diameter bit capacity, 24″ hole depth, pull star
    K-401-G15E:15 hp gasoline motor, electric start with battery & charger, 8″ diameter bit capacity, 24″ hole depth
    K-401-H: 20 to 48 hp hydraulic motor, @ 2000 PSI
    K-401-A: Pneumatic powered motor, 90 CFM / 80 PSI

    .

    8297 Kor-It K-416 Mobile Core Drill Machines by

    8297 Kor-It K-416 Mobile Core Drill Machines
    Check Price for 8297 Kor-It K-416 Mobile Core Drill Machines

    Kor-It K-416 Mobile Core Drill Machines

    • Free shipping

    K-416-G15 Standard Package Includes

    • Drill Machine, 16″ diameter bit capacity, 24″ hole depth.
    • Variable Rpm: 300 to 1100 bit Rpm
    • Water swivel
    • Power system
    • Drill stand

    K-416-H

    • 20 HP hydraulic motor, @ 2000 PSI.

    K-416-A

    • Pneumatic powered motor, 275 CFM / 80 PSI.

    Get the job done faster and reduce job costs

    • Quick set up and tear down
    • Drill faster with gasoline motors (15 hp), hydraulic (21 to 48 hp, per customer requirement) or pneumatic (90cfm/80 PSI)
    • Minimize lane closure/traffic control requirement
    • Increased bit life with very stable drilling platform
    • Easy removal from vehicle when not in use

    Gain independence in the field

    • Stand-alone gasoline system with optional electric start requires no additional power supplies

    Obtain years of use and dependable performance with stable drilling platform

    • Heavy-duty, dual-precision ground columns and tenzalloy precision machined carriage assembly
    • Smooth-precision ball feed screw system
    • Capable of handling large and small hole drilling

    Flexible drilling system

    • Carried and/or mounted on a trailer, pickup or van
    • Accurate hole drilling positioning and easy alignment of drill platform with 4″ Delrin wheels
    • 16″ diameter core bit capacity and 315 lbs. weight

    .

    8298 Kor-It 24in K-424 Gasoline Powered Core Drill Machines by Kor-It INC

    8298 Kor-It 24in K-424 Gasoline Powered Core Drill Machines
    Check Price for 8298 Kor-It 24in K-424 Gasoline Powered Core Drill Machines

    Kor-It 24″ K-424 Gasoline Powered Core Drill Machines

    • Free shipping
    • Quick set-up – minimizes time required for each job
    • Longer bit life with very stable drilling platform – reduces job costs
    • Drill faster with gasoline power – get the job done in less time
    • Stand-alone system requires no additional power – field independent
    • Heavy-duty, dual-precision ground columns and tenzalloy precision machined carriage assembly
    • Smooth-precision ball feed screw system
    • Designed for large and small hole drilling – one machine does the work of two
    • Accurate drill placement and easy alignment of drill platform
    • Drill stand
    • 15 hp Gasoline motor with electric start with battery and charger
    • Dual-drive shafts
    • 24″ bit diameter capacity
    • Water swivel assembly
    • 24″ drilling depth

    .

    8299 Kor-It 16in K-616 Gasoline Powered Core Drill Machines by Kor-It INC

    8299 Kor-It 16in K-616 Gasoline Powered Core Drill Machines
    Check Price for 8299 Kor-It 16in K-616 Gasoline Powered Core Drill Machines

    Kor-It 16″ K-616 Gasoline Powered Core Drill Machines

    • Free shipping
    • Quick set-up – minimizes time required for each job
    • Longer bit life with very stable drilling platform – reduces job costs
    • Drill faster with gasoline power – get the job done in less time
    • Stand-alone system requires no additional power – field independent
    • Heavy-duty, dual-precision ground columns and tenzalloy precision machined carriage assembly
    • Smooth-precision ball feed screw system
    • Designed for large and small hole drilling, plus auger capabilities – one machine does the work of two
    • Accurate drill placement and easy alignment of drill platform

    K-616-G15 includes

    • Drill stand
    • 15 hp Gasoline motor with electric start
    • 16-in bit diameter capacity
    • 8″ auger capacity
    • Water swivel assembly
    • 21″ drilling depth

    .

    8290 Kor-It 12in K-90-X System by

    8290 Kor-It 12in K-90-X System
    Check Price for 8290 Kor-It 12in K-90-X System

    Kor-It 12″ K-90-X System
    Complete anchor bolt drilling systems

    • Free shipping
    • Drill stand with anchor bolt base
    • 3.5 hp electric motor with two speed gearbox-450/900 Rpm
    • 20 hp hydraulic motor
    • Up to a 12 in. diameter bit capacity
    • Water swivel
    • 22 in. carriage travel
    • Bit capacities of up to 24-in.
    • Power Sources – Electric, Pneumatic & Hydraulic

    K-90: 3.5 hp electric motor, 20 Amps, 115 Volt, 50/60 Hz.
    K-90-M2: 3.5 hp electric motor, 10 Amps, 220 Volt, 50/60 Hz.
    K-90-H: 21 to 48 Hp, hydraulic motor, @ 2000 PSI.
    K-90-A: Pneumatic powered motor, 90 CFM / 80 PSI.

    .

    8291 Kor-It K-201 Core Drill by

    8291 Kor-It K-201 Core Drill
    Check Price for 8291 Kor-It K-201 Core Drill

    Kor-It K-201Core Drill

    • Free shipping
    • Drill stand with anchor bolt base
    • 3.5 hp electric motor with two speed gearbox-450/900 Rpm
    • 20 hp hydraulic motor
    • Up to a 12″ diameter bit capacity
    • Water swivel
    • 36 in. carriage travel
    • Power Sources – Electric, Pneumatic, Hydraulic

    K-201: 3.5 hp electric motor, 20 Amps, 115 Volts, 50/60 Hz
    K-201-M2: 3.5 hp electric motor, 10 Amps, 220 Volts, 50/60 Hz
    K-201-H: 21 to 48 hp hydraulic motor, @ 2000 PSI
    K-201-HR-24: Hydraulic powered, roller carriage, 12 to 24 in. bit diameter capacity
    K-201-HRA: Semi-automatic hydraulic powered (see K-201-HR)
    K-201-A: Pneumatic powered motor, 90 CFM / 80 PSI

    .