Category: Kor-IT

8292 Kor-It 12in K-102-XX System by

8292 Kor-It 12in K-102-XX System
Check Price for 8292 Kor-It 12in K-102-XX System

Kor-It 12″ K-102-XX System
Flexible, multipurpose vacuum/anchor bolt drilling system

  • Free shipping
  • 3.5 hp electric motor with 2-Speed Gearbox – 450/900 Rpm
  • 20 hp hydraulic motor
  • Up to 12-inch diameter bit capacity, 8″ std., 22″ hole depth
  • Water swivel
  • Large (6-inch) rubber wheels
  • Oil-less vacuum pump, vacuum filter, hose and quick connections
  • 22-inch carriage travel
  • Power Sources – Electric, Pneumatic, Hydraulic

K-102: 3.5 hp electric motor, 20 Amps, 115 Volts, 50/60 Hz
K-102-M2: 3.5 hp electric motor, 10 Amps, 220Volts, 50/60 Hz
K-102-WM: 3.5 hp electric motor, 20 Amps, 115 Volts, 50/60 Hz, with quick disconnect column for wall & ceiling mounting
K-102-H: 20 to 48 hp hydraulic motor, @ 2000 PSI
K-102-A: Pneumatic powered motor, 90 CFM / 80 PSI

.

8293 Kor-It K-1700 Flexible Position Receiver Mounted Drilling System by

8293 Kor-It K-1700 Flexible Position Receiver Mounted Drilling System
Check Price for 8293 Kor-It K-1700 Flexible Position Receiver Mounted Drilling System

Kor-It K-1700 Flexible Position Receiver Mounted Drilling System

  • Free shipping

Reduce job costs

  • Minimize time required for each job
  • Increase bit life with very stable drilling platform
  • Drill faster with gasoline motor : 15 hp electric start

Flexible Position Receiver Mounted Drilling System

  • Accurate hole drilling – Easy positioning and alignment of drill head
  • Positioning arm swings 180 degrees in a semi-circle
  • Multi-jointed arm allows drilling at almost any position within the semi-circle
  • Drill head extends approximately 36-inches beyond side of vehicle
  • Storage position against vehicle bumper for easy transport

Obtain years of use and dependable performance with stable drilling platform

  • Heavy-duty, dual-precision ground columns
  • Tenzalloy precision machined carriage assembly
  • Smooth-precision ball feed screw system
  • Capable of handling large and small hole drilling
  • Auger capability available

Standard package includes

  • Variable Rpm: 300 to 1500 bit Rpm
  • Water swivel
  • Drive shaft stabilizer system
  • Flexible position receiver mount bracket
  • Drill caddy
  • Drill head – Up to 24-inch bit capacity, Auger Capabilities also available

Independence in the field

  • Stand-alone gasoline-powered system – No additional power supplies needed
  • Mounts to standard 2-inch receiver hitch of a pickup, van or other vehicle
  • Easy one person vehicle mounting or removal using its own drill caddy

.

8294 Kor-It K-1600 Flexible Position Receiver Mounted Drilling System by

8294 Kor-It K-1600 Flexible Position Receiver Mounted Drilling System
Check Price for 8294 Kor-It K-1600 Flexible Position Receiver Mounted Drilling System

Kor-It K-1600 Flexible Position Receiver Mounted Drilling System

  • Free shipping

Reduce job costs

  • Minimize time required for each job
  • Increase bit life with very stable drilling platform
  • Drill faster with gasoline motor : 15 hp and 6 hp pull start

Receiver Mounted Drilling System

  • Accurate hole drilling – Easy positioning and alignment of drill head
  • Positioning arm swings 180 degrees in a semi-circle
  • Storage position against vehicle bumper for easy transport

Obtain years of use and dependable performance with stable drilling platform

  • Heavy-duty, dual-precision ground columns
  • Tenzalloy precision machined carriage assembly
  • Smooth-precision ball feed screw system
  • Capable of handling large and small hole drilling
  • Auger capability available

Standard package includes

  • Variable Rpm: 300 to 1500 bit Rpm
  • Water swivel
  • Drill caddy
  • Receiver mount bracket
  • Drill head

Independence in the field

  • Stand-alone gasoline-powered system, No additional power supplies needed
  • Mounts to standard 2″ receiver hitch of a pickup, van or other vehicle
  • Easy one person vehicle mounting or removal using its own drill caddy

.

8288 Kor-It K-160 KOR-Mobile Trailer System by

8288 Kor-It K-160 KOR-Mobile Trailer System
Check Price for 8288 Kor-It K-160 KOR-Mobile Trailer System

Kor-It INC K-160 KOR-Mobile Trailer System

  • Free shipping
  • 15 hp gasoline powered drill head with electric start, 16 inch bit capacity and 24-inch travel.
  • Variable drill head positioning system, which allows drill head movement of approx. 43 inches side to side and 12 inches fore and aft for accurate hole placement.
  • Hydraulic assisted machine lift, for single-handed removal and replacement of the drill head for remote drilling applications
  • Lockable, weather resistant toolbox for securing all your drilling accessories.
  • 200-gallon water tank and 12 VDC water pump
  • 5 ft. by 8 ft. steel construction trailer, equipped with electric brakes and pre-wired for brake and tail lights

K-160-G15

  • Removable Drill head with position system, 15 HP electric start motor with battery & charger, 16″ diameter bit capacity, 24″ hole depth, 200 gallon water tank and 12 VDC pump, 5’ x 8’ trailer prewired with tail lights and electric brakes.

K-160-G616

  • KOR-Mobile Trailer system with 8”auger capability, with Drill head position system (see K-160-G15)

K-160-G624

  • Removable drill head with positioned system, 15 HP electric start motor with battery & charger, dual drive shafts for up to 24″ diameter bit capacity, 24″ hole depth, 200 gallon water tank and 12 VDC pump, 5’ x 8’ trailer pre-wired with tail lights and electric brakes

.

Recent Entries »