Category: More Tile & Stone Tools
ALR-E Reconditioned 5′ Chisel Scaler & Chisel by Edco
EDCO ALR-Ergonomic Chisel Scaler
Free Shipping
ALR-5 Features:
- Removes:
- Tiles (vinyl, ceramic, quarry…)
- Carpeting
- Roofing materials
- Fireproofing
- Rubber coatings
- Waterproofing
- Linoleum
- Insulation
- Asbestos
- Mastics
- Paint build-up
- Ice
- Quick-change, hardened steel tool chuck accepts dozens of accessories
- Available in heavy-duty steel or lightweight aluminum
- 5′ Long, for floors. Use chisel for removing concrete, floor tile, vinyl tile etc.
- Scraper blade available for vinyl floors, wall tile, thin set etc.
- Weight 18 lb, 2200 blows per minute.
- Operates at 90 PSI. Air consumption 4.5 SCFM.
- Only 1.5 HP compressor required.
- 4″ chisel included. One year warranty.
.
9617 Rubi Wall Tile Wedges by
Rubi Wall Tile Wedges
- 3/16″ (5mm) & 5/16″ (7.5mm) Rubi Plastic Wedges
- Bags of 500 pcs.
- If the Wedge bottoms out before opening the joint wide enough, just snip off the end and the wedge will be larger.
- Ideal for use with wall tiles. Rubi tile wedges allow for excellent finishing with total precision due to the homogeneity of their measurements and the absence of rough edges and small defects.
- Tile wedges align tiles in vertical installations so the grout lines are even throughout the installation.
- Works with all sizes of ceramic tile, porcelain, stone, and marble.
- Perfect for back-splash installations.
.
9394 Tajima SCRAPE-RITE Heavy-Duty Scrapers by
Tajima SCRAPE-RITE Series Heavy-Duty Scrapers
- Reversible blade scrapers for wallpaper, vinyl, veneer, floor coverings and more.
- Reversible Endura blade for razor sharp or standard scraping edge.
- Die-cast head , heavy duty reinforced shaft and stainless steel end cap.
- Strong twin-bolt blade locking with spring-loaded clamp.
- Angled head/blade to generate fast and efficient scraping action.
- Elastomer coated sure-grip handle.
- Hi-impact reinforced shaft with stainless steel end“cap for hammering.
- Includes 3 Endura 3/4” blades packaged in protective hard packs.
- Tajima Endura blades offer the hardest, sharpest cutting edge possible.
.
9387 RAC-A-TAC With Chest Support 2″ Casters by
Racatac With Chest Support 2″ Casters
- Chest support will allow you to work in a supported leaning over position, while sitting and kneeling on the Racatac.
- Speed & comfort for a demanding job.
- Comfortable web spring seat.
- Adjusts from 11.5″ to 15.5″ high.
- Made in the USA.
- Thick foam inner knee pads for all day comfort.
- 2″ polyurethane ball bearing casters.
- Weighs 14 lbs, load capacity 300 lbs.
.
9388 Marshalltown QLT Soft Grip 11in X 4-1/2in Notched Trowels by Marshalltown
Marshalltown QLT Soft Grip 11″ X 4-1/2″ Notched Trowels
- Aluminum alloy mounting riveted to a hard tempered steel blade
- Longer shank with 9 welded rivets for added durability when “lifting” recently set tiles
- Soft grip handle for extra comfort and grip
- Several notch styles and sizes available to control depth and amount of adhesive applied
Recommended notch use size
- NT676 1/4″ X 3/16″ X 1/4″ V Notch: Small ceramic tile floor, wall tile.
- NT672 1/4″ X 1/4″ X 3/8″ Square Notch: Large ceramic tile floor, pavers.
- NT671 1/4″ X 1/4″ X 1/4″ Square Notch: Medium ceramic tile floor, wall tile.
- NT686 1/4″ X 1/4″ X 3/8″ U Notch: Medium ceramic tile floor, wall tile.
- NT685 1/4″ X 1/4″ X 1/2″ U Notch: Large ceramic tile floor, wall tile.
- NT670 1/2″ X 1/2″ X 1/2″ Square Notch: Large ceramic tile floor, pavers, EIFS.
- NT689 1/4″ X 1/4″ X 1/4″ U Notch: Medium ceramic tile floor.
.
9389 RAC-A-TAC With Chest Support 3″ Casters by
Racatac With Chest Support 3″ Casters
- Chest support will allow you to work in a supported leaning over position, while sitting and kneeling on the Racatac.
- Speed & comfort for a demanding job.
- Comfortable web spring seat.
- Adjusts from 11.5″ to 15.5″ high.
- Made in the USA.
- Thick foam inner knee pads for all day comfort.
- 3″ polyurethane ball bearing casters.
- Weighs 14 lbs, load capacity 300 lbs.
.
9212 Easy-Pull Tile Spacers by
“The Tile Spacer with a pull-tab”
- Instead of using a tile spacer remover tool to attempt to pry out those old-fashioned tile spacers.
- Come complete with their own patented pull-tab, allowing for fast and easy removal of the spacers!
- No more chipped tile because of those spacer remover tools.
- Remove spacers in a small fraction of the time than you did before.
- Easy-Pull Tile Spacer will save both time and money!
.
9183 Roto Zip X-Shield Attachment by
Roto Zip X-Shield Attachment
- For cutting an even wider variety of materials.
- Brazed dry diamond Wheel will cut through materials as hard as porcelain, ceramic floor tile, granite, or slate.
- The wood wheel cut-off wheel will go through, door jambs with ease.
- X-Shield cover includes wood wheel
- This useful attachment allows you to make intricate cuts in very hard materials without the hassle of a wet-saw.
- ZM3 attachment included with RZ20-4200 Kit.
Features include
- Robust plastic adjustable guard which deflects sparks and fragments.
- Quick release body latch that allows you to reposition your guard without using other tools.
- Cut up to 9/16″ depth with ease!
- ZM3 ZipMate attachment included with RZ20-4200 Kit
.
9184 RotoZip RZ20-4200 Spiral Saw Kit with Jig Saw Handle by BOSCH
RotoZip RZ20-4200 Spiral Saw Kit with Jig Saw Handle
The RotoZip RZ20-4200 Spiral Saw Kit Features:
- Amps: 5.5
- No Load RPM: 15,000-30,000
- Weight: 3.4 lbs
- 3 JAW CHUCK Industry 1st
- Quick, Easy and Wrench less Bit Changes!
New Designed Body
- Redesigned tool body has internal ribbed supports to provide added structural integrity to prevent issues of fan slippage and spindle lock failures.
Jigsaw Handle Attachment
- Comfortable to use
- Easy to attach
- The handle that goes with everything
- Makes counter top cut-outs easy
- Cut vents and floor openings in one motion
- Make smooth cuts in laminate flooring
- Works with straight edge guide for straight cuts
Dust Sealed Switch
- Prevents switch failure from dust contamination and excess buildup.
Plastic Adjustable Foot
- Made of high strength plastic, adjust ability allows for a depth of cut up to 1″, quick release latch provides for easy positioning and removal.
Quick Release Detachable Handle
- Strong and robust handle that is easy to remove and replace depending on the user’s preference.
Soft Grip Body
- Enhances the feel of the tool’s body and provides hand comfort when using the tool for long periods of time.
Variable Speed Control
- Provides precise control of cutting speed (from 15,000 – 30,000 rpm) when cutting a variety of materials.
Metal bezel
- Provides added structural support for the spindle lock button.
- Aligns with image of tough, durable and professional grade tool.
Integrated LED Work Light
- Illuminates the rotating bit, provides improved sight of the cutting area.
RotoZip RZ20-4200 Kit Includes:
- RZ20 Spiral Saw Tool
- Sabrecut™ bit (1)
- Guidepoint bit (1)
- Tile Cut bit (1)
- Grout Removal bit (1)
- Bit Case
- ZipMate attachment
- Jigsaw Handle attachment
- Grout Removal attachment
- Masonry Cut-off Wheel
- Metal Cut-off Wheel
- Wrench
- Soft Tool Bag
RZ20 handle configuration, XShield attachment optional.
.