Category: Polishing & Profiling Equipment

6205 4in MK Standard Wet Diamond Pads by MK

6205 4in MK Standard Wet Diamond Pads
Check Price for 6205 4in MK Standard Wet Diamond Pads

MK 4″ Standard Wet Diamond Pads

  • Flexible, Hook & Loop backed polishing discs designed to achieve a scratch-free highly polished finish on all straight or contoured granite and marble edges
  • The Hook & Loop backing allows for fast disc changes
  • Disc backs are color-coded for easy grit size identification
  • 3700 Rpm Maximum

Important: Resin Pad Break-In Procedure Diamond resin discs are shiny when new. This shine must disappear in order for the discs to perform their best, especially with the finer grits (400 and up). To do this, run any new disc on a rough surface – such as granite, sandstone or concrete – always making sure there is enough coolant (water). This will force the outer bond to be eroded, leaving the diamonds properly exposed for polishing. They will gradually perform even better as normal wear sets in.

.

7892 Diamant Boart 5in Premium Wet Polishing Pads by

7892 Diamant Boart 5in Premium Wet Polishing Pads
Check Price for 7892 Diamant Boart 5in Premium Wet Polishing Pads

5″ Diamond Polishing Pad

  • Great for Concrete, Granite, Hard Marble & Porcelain.
  • Pads are 2.5mm thick which is thicker, longer lasting and more flexible than many other discs on the market.
  • Don’t be fooled by the low price, Diamond Boart discs really are a premium polishing pad, they will outlast and outperform any other diamond economy polishing disc.
  • These extremely flexible pads feature a high diamond concentration that provide the user with superior results at a very competitive price.
  • For wet use only


.

9563 EdgeRight Wet or Dry Profiler by

9563 EdgeRight Wet or Dry Profiler
Check Price for 9563 EdgeRight Wet or Dry Profiler

Edgeright Dry Profiler

  • Dry 3/8″ fine (200 grit) or coarse and 1/4″ coarse round-over profilers for granite, engineered stone and porcelain.
  • All 7mm radius.
  • Long-life brazed diamond cutting surface.
  • Dry cutting wheel with a 5/8″-11 female
  • Nylon guide slides along the surface to make this tool nearly “Goof-proof”
  • Can be used wet with external water supply
  • Maximum 4500 Rpm recommended
  • Guide Bearing: Bottom: Stainless Steel, top: no-scratch Polymer.
  • Water NOT required. Profiler is channeled for water and can be used wet or dry.

Features

  • Bullnose any size tile or slab.

  • Portable fits most polishers.
  • Industrial strength Stainless Steel withstands job site abuse.
  • No-Scratch top bearing
  • Long-life brazed diamond cutting surface.
  • In conjunction with the EdgeRight® Bullnosing Bench, an operator with little or no fabrication experience can bullnose tile like a PRO!.

9553 PV7001C Makita 7in Electronic Polisher by Makita

9553 PV7001C Makita 7in Electronic Polisher
Check Price for 9553 PV7001C Makita 7in Electronic Polisher

PV7001C Makita 7″ Electronic Polisher

High Power-to-Weight Ratio

  • Lightweight for Easy Control (4.4 lbs.)
  • Electronic Speed Control Maintains Speed Under Load
  • Motor over pad design for better balance and maximum control
  • Variable Speed For Desired Application
  • Externally accessible carbon brushes for easy maintenance
  • Removable handle for left or right hand use
  • Variable Speed (2,500 – 4,700 RPM) for Desired Application
  • Well Balanced For Maximum Control And Reduced Operator Fatigue
  • Soft Start Feature Gradually Brings Tool to Speed.
  • Amps 7.9, (120V)
  • 5/8-11 spindle thread.
  • Trigger Lock-On Button For Convenience
  • Standard equipment: wrench, side handle, hook & loop pad, cover and air deflector

.

9552 GV7000C Makita 7in Electronic Sander by Makita

9552 GV7000C Makita 7in Electronic Sander
Check Price for 9552 GV7000C Makita 7in Electronic Sander

GV7000C Makita 7″ Electronic Sander

  • Lightweight for Easy Control (4.4 lbs.)
  • Motor over pad design for better balance and maximum control
  • Electronic variable speed control to match the application
  • Externally accessible carbon brushes for easy maintenance
  • Removable handle for left or right hand use
  • Variable Speed (2,500 – 4,700 RPM) for Desired Application
  • Soft Start Feature Gradually Brings Tool to Speed.
  • Amps 7.9, (120V)
  • 5/8-11 spindle thread.
  • Standard equipment: wrench, side handle, hook & loop pad, cover and air deflector

.

9537 Diamant Boart 4in Copper Pads for Granite by

9537 Diamant Boart 4in Copper Pads for Granite
Check Price for 9537 Diamant Boart 4in Copper Pads for Granite

Diamant Boart 4″ Copper Pads for Granite

These new pads from Diamond Boart are the most innovative wet pads on the market! These wet pads integrate copper into a flexible bond. Fastest polishing pads we have used! Very flexible you can use them for flat edge polishing! Get the finish an excellent shine as good as you can get with any pad and better than you will get with most pads.

  • Use in place of vitrified pads.
  • Aggressive removal on flat edge.
  • Use wet only.
  • Ultra Fast Polishing.
  • Use on wet polisher.
  • Excellent Life Span
  • Use on flat edge only.
  • 50 Grit, 70 Grit, 120 Grit, 220 Grit.
  • These pads are meant to be run wet only. When used dry the copper will overheat which will ruin the pad and mark the stone. A rigid backer is recommended for polishing with copper pads.


.

9407 Flex PLW 903 ST Air Wet Polisher by Flex NA

9407 Flex PLW 903 ST Air Wet Polisher
Check Price for 9407 Flex PLW 903 ST Air Wet Polisher

Flex PLW 903 ST High-performance Pneumatic Wet Stone Grinder

  • Rugged and durable 4-1/2” Pneumatic WET Stone Polisher used primarily for polishing of stone surfaces and edges.
  • Lightweight, powerful, and reliable ideally suited for continuous operation.
  • Air supply and exhaust are combined in one slender wrap hose.
  • The exhaust is blown out to the back, away from the user and the workpiece.
  • Specially designed for stationary polishing environments.
  • It has a centrally fed water distribution system that provides the best finishes possible.
  • Spindle 5/8” – 11
  • Air Inlet 1/4” Npt
  • Stable handle with insulating powder coating
  • Hose adapter with Water valve with hose Wrenches

Specifications PLW 903 ST

  • Requirements for this tool are a cast iron 2 stage compressor, a large reservoir, 10 hp for each tool.
  • Air consumption is 30 CFM and required air pressure is 85-90 PSI.
  • Max. disc diameter 4-1/2”
  • Speed, without load 3,200 RPM
  • Air-pressure hose with quick-action coupling 10 mm
  • Weight 4.5 lbs

Advantages At A Glance

  • Central water supply: for wet grinding of granite and marble
  • Quick-action, brass coupling: for 1/2” connector for water hoses
  • Tool fixture: 5/8-11 UNC spindle thread
  • Diecast gear head is high-quality and robust, designed especially for wet stone work
  • Very sleek and versatile plastic housing that insulates against the cold
  • Absolute safety without electrical components
  • Most sparing air pressure consumption

.