Best Door Tools Store

Star Cutters for Husqvarna Mini planer/Scarifier

• For general cleaning on concrete, removal of epoxy paint, oil, grease, glue or thermoplastic road markings.
• 2″ O.D. x 1/2″ I.D. x .125″ Thick (51 x 13 x 3mm)

Beam Cutters

• For dressing concrete and asphalt surfaces, anti-skid grooving (ramps, garages, farm yards, etc.) & de-scaling of steel decking.
• 2″ O.D. x 5/8″ I.D. x .19″ Thick (51 x 16 x 5mm)

6mm Tungsten Carbide Cutters

• High performance cutters used to modify surface textures on asphalt or concrete.
• 2″ O.D. x 5/8″ I.D. x .25″ Thick (51 x 16 x 6mm).

15mm Tungsten Carbide Cutters

• High performance cutters used to modify surface textures on asphalt or concrete.
• Can also be used for coating removal.
• 2″ O.D. x 5/8″ I.D. x .75″ Thick (51 x 16 x 19mm)

Wire Brush

• Removes rust, de-scales, cleans shutters and polishes steel.
• Customer-installed wire brush kit includes shaft assembly and six wire brushes.

Number of Pieces required for complete head assembly 1/2″ Shaft

1/2″ Shaft Assembly	Cutters	Spacers
Star	108	108
Beam	108	108
6mm Carbide Cutter	88	100
15mm Carbide Cutter	88	100
Wire Brush 180mm	6	0

.

Highly productive scarifier.

• Fully adjustable handle in the down position, the Mini-Planer CG 200 S is easy to transport.
• Removable side cover allows for easy and convenient drum changes.
• Accepts the full range of steel and tungsten carbide flails/cutters.
• Unit can be ordered complete with assembled drum and cutters.
• Compact, rugged and highly portable.
• Sturdy steel frame with 7-3/4″ (197mm) wide cutting path which minimizes the number of passes needed when scarifying or texturing large surface areas.
• Depth control adjustment wheel is easy to use with limitless settings (wheel includes locking device).
• Automatic reset to the preset cutting depth.
• Adjustable cutting head height control and retractable handle for easy transportation.
• Premium poly V-belt drives power to the drive shaft.
• 1-1/2″ diameter vacuum port allows a dust collection device to be attached.
• Removable side cover allows for easy replacement of cutter heads with no need to tilt machine.
• Dual voltage 110v/230v Electric model, 11.5 Amps.

Ideal For:

• Sidewalk trip hazard repair
• Concrete and Coatings removal
• Floor cleaning and/or preparation
• Traffic line and markings removal
• Creating non-slip surfaces
• Length 27″, width 15-1/2″

.

Husqvarna Mini planer/Scarifier Complete Head Assembly Kits.

Star Cutters

• For general cleaning on concrete, removal of epoxy paint, oil, grease, glue or thermoplastic road markings.
• 2″ O.D. x 1/2″ I.D. x .125″ Thick (51 x 13 x 3mm)

Beam Cutters

• For dressing concrete and asphalt surfaces, anti-skid grooving (ramps, garages, farm yards, etc.) & de-scaling of steel decking.
• 2″ O.D. x 5/8″ I.D. x .19″ Thick (51 x 16 x 5mm)

6mm Tungsten Carbide Cutters

• High performance cutters used to modify surface textures on asphalt or concrete.
• 2″ O.D. x 5/8″ I.D. x .25″ Thick (51 x 16 x 6mm)

15mm Tungsten Carbide Cutters

• High performance cutters used to modify surface textures on asphalt or concrete.
• Can also be used for coating removal.
• 2″ O.D. x 5/8″ I.D. x .75″ Thick (51 x 16 x 15mm)

Wire Brush

• Removes rust, de-scales, cleans shutters and polishes steel.
• Customer-installed wire brush kit includes shaft assembly and six wire brushes.

Number of Pieces required for complete head assembly 1/2″ Shaft

1/2″ Shaft Assembly	Cutters	Spacers
Star	108	108
Beam	108	108
6mm Carbide Cutter	88	100
15mm Carbide Cutter	88	100
Wire Brush 180mm	6	0

.

Husqvarna TDGH Grinding Heads

• General purpose.
• TDGH (10 and 12 segments) is for fast removal.
• TDGH (20 and 22 segments) is for a smooth finish.

Features:

• For smoothing rough or patched floors and feathering uneven joints or slab panels; removing hard epoxies, urethane and other coatings or toppings; and grinding down bumps, raised or curled sidewalk panels.
• Two separate bolt hole patterns mount on a majority of grinding machines.
• Total segment height: .300″ diamond segment.
• 12″ diameter TDGH grinding heads are to be used with Single Head Grinder only.
• Need adapter kit item no. 177861 for TDGH Grinding Heads to mount on Dual Trac Grinder.

.