Best Door Tools Store

Makita G2800L Portable Generator 2,800W

Powerful 6.0 HP, 169cc, Overhead Cam (OHC) EX Series engine.

G2800L Makita Generator Features:

• EX Series engines are chain-driven for superior performance
• OHC engines have less moving parts and reduced noise
• Easy starting with an automatic compression release system with 40% less pulling force in sub-zero weather
• 2,800 Watt maximum output
• 9.7 hours runtime from 3.7 gallon durable metal fuel tank
• Pent-roof combustion chamber emits less exhaust emissions for more power
• Commercial-duty electrical components with common NEMA receptacles
• Vibration reducing engine and frame mounts
• Reduced sound output of 68 dB
• Recoil starter system with electronic ignition for easy starting and reliable, consistent service
• Durable metal tank holds 3.7 gallons of fuel for longer run time
• DC output with circuit breakers for consistent electrical flow with overload protection
• Impact resistant design and full cage metal frame protects the commercial duty electrical controls and engine
• Innovative cooling design with large cooling fins engineered into the crankcase, cylinder and mounting base
• Fully lubricated system as timing chain carries oil to camshaft, rocker arms and valve train for extended life
• Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low
• Cast iron cylinder increases durability and extends engine performance
• Large, heavy duty air and fuel filters with high capacity to reduce service intervals

Technical Features

Makita Generator	G2800L
Dry weight	95 lbs
Generator Length x width x height	21-1/4″ x 17″ x 18-3/4″
Continuous Watts	2,400W/20.0 A
Maximum Watts	2,800W/23.3 A
Engine	OHC, EX series
Volts AC (60Hz)	120 V
Volts DC (AMPS)	12V (8.3A)
Fuel capacity	3.7 US gal
Continuous Operation (hrs.)	9.7 Hrs
Horse Power	6 hp @ 3,600 Rpm
Sound level at max.load (dB(A)at 23 ft)	68 dB(A)

.

G4300L Makita Generator 4,300W

Powerful 9.0 HP, 265cc, Overhead Cam (OHC) EX Series engine.

G4300L Makita Generator Features:

• EX Series engines are chain-driven for superior performance
• OHC engines have less moving parts and reduced noise
• Easy starting with an automatic compression release system with 40% less pulling force in sub-zero weather
• 4,300 Watt maximum output
• 8 hours runtime from 4.2 gallon durable metal fuel tank
• Pent-roof combustion chamber emits less exhaust emissions for more power
• Commercial-duty electrical components with common NEMA receptacles
• Vibration reducing engine and frame mounts
• Reduced sound output of 71 dB
• Recoil starter system with electronic ignition for easy starting and reliable, consistent service
• Durable metal tank holds 4.2 gallons of fuel for longer run time
• DC output with circuit breakers for consistent electrical flow with overload protection
• Impact resistant design and full cage metal frame protects the commercial duty electrical controls and engine
• Innovative cooling design with large cooling fins engineered into the crankcase, cylinder and mounting base
• Fully lubricated system as timing chain carries oil to camshaft, rocker arms and valve train for extended life
• Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low
• Cast iron cylinder increases durability and extends engine performance
• Large, heavy duty air and fuel filters with high capacity to reduce service intervals

Technical Features

Makita Generator	G4300L
Dry weight	121 lbs
Generator Length x width x height	22-3/4″ x 18-1/2″ x 20″
Continuous Watts	3,700W-30.8 A/15.4 A
Maximum Watts	4,300w/35.8A/17.9A
Engine	OHC, EX series
Volts AC (60Hz)	120/240 V
Volts DC (AMPS)	12 V (8.3 A)
Fuel capacity	4.2 US gal
Continuous Operation (hrs.)	8 Hrs
Horse Power	9 hp @ 3,600 Rpm
Sound level at max.load (dB(A)at 23 ft)	71 dB(A)

.

G12010R Makita Generator 12,000W

High Output Capacity for Demanding Situations

G12010R Makita Generator Features:

• Feature OSHA approved receptables
• Commercial-duty steel gas tank
• All ball bearing supported, forged steel crankshaft
• Cast-in-place cylinder liner made from high carbon steel
• Water resistant louvers (IP235 rating) to protect the electrical components
• Bubber feet/mounts to reduce vibration
• 8+ hours of operation from a full fuel tank
• Electronic voltage regulator for more accurate voltage output
• Fuel gauge for easy monitoring
• GFCI safety receptacle & USDA approved spark arresting muffler
• Dual voltage – 120V/240V output
• Electric starter with automatic choke
• Automatic idle control reduces engine to low RPM operation during no load draws, reducing fuel consumption & engine wear
• Tool kit & 2 each Ignition key

Technical Features

Makita Generator	G12010R
Dry weight	311 lbs
Generator Length x width x height	32.5″ x 24.125″ x 30.375″
Continuous Watts	12,000W-30.8 A/15.4 A
Maximum Watts	12,000W/100A
Engine	Model EH65D
Volts AC (60Hz)	120/240 V
Volts DC (AMPS)	12 V (8.3 A)
Fuel capacity	11.4 US gal
Continuous Operation (hrs.)	8.2 Hrs
Horse Power	22 hp @ 3,600 Rpm
Sound level at max.load (dB(A)at 23 ft)	77 dB(A)

.

Powerful 2.5 hp Robin, 85cc, Overhead Valve (OHV) engine

1,100 Watt maximum output

Weight 55 lb.

4.2 hours runtime from 1.1 gallon fuel tank

Recoil starter system with electronic ignition makes for easy starting and reliable, consistent service

Fully enclosed design for reduced sound output of 59 dB and protection

Innovative cooling design with large cooling fins engineered into the crankcase, cylinder and mounting base

Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low

Cast iron cylinder increases durability and extends engine performance

Large, heavy duty air and fuel filters with high capacity to reduce service intervals

Impact resistant design

Specifications:

Max. Output Current: 1,100W/9.2A

Length 19-1/2”, Width 11-3/4”, Height 17-1/2”

.