Category: Quantity Pricing

9634 MK-TX3 10in. Diamond Blades by

9634 MK-TX3 10in. Diamond Blades
Check Price for 9634 MK-TX3 10in. Diamond Blades

MK-TX3 10″ Diamond Blade

  • The TX Blade Series have a 1” arbor. that differentiates them from typical wet cutting tile blades available in the market.
  • The TX Blade Series are premium blades that match the high quality standards that professionals expect
  • TX-20 Premium Tile, provides dependable performance and long life, cutting ceramic tile and marble. 7mm rim height.
  • TX-30 Porcelain Pro offers a thicker kerf version of MK Diamond’s popular Hot Dog blade. Unique “J” cooling slots deliver fast “chip free” cutting of porcelain tile and other hard dense materials. 8mm rim height.
  • TX-40 Supreme Tile & Stone is MK Diamond’s very best for cutting from marble to granite. The thicker blade kerf and high rim height makes it the ideal choice for jobs that require miter cutting. 10 mm rim height.
  • TX-50 Premium Glass is simply the best all around glass blade on the market. This diamond matrix formulation for cutting glass produces consist results time after time. Often glass cutting requires regular “dressing” to remove debris from the rim of the blade. 7mm rim height.
  • Important Notice: Standard 5/8” Arbor Tile Blades will NOT Fit the TX-3.


9385 XL Hydro Sponge BY US Foam by US Foam

9385 XL Hydro Sponge BY US Foam
Check Price for 9385 XL Hydro Sponge BY US Foam

XL Hydro Sponge by US Foam

  • Extra large fine pore hydrophilic sponge.
  • Soft & durable, excellent for removing excess grout, rinse clean.
  • Extra Large fine pore. 7-1/4″x 5″x 2″.
  • Rounded edges to prevent “digging out” or marring of grout.
  • Only $0.99 Each, 375 pcs bale quantity $371.25
  • Made by US Foam.
  • Use a clean grout float to remove any excess grout from floor.
  • Allow up to 15 minutes for the grout to set and then proceed to wipe floor clean.
  • Keep a clean bucket of water available and replace as necessary. Take a damp sponge and place flush on tile at an angle to tile joints. Pull sponge down and towards you. Be careful not to dig the grout mortar out of the joints.
  • Flip sponge over and repeat making sure to overlap the adjacent area you have just wiped. Then rinse sponge thoroughly and repeat process. Some areas may need to be wiped more than once.


7005 Pearl Pro-V Diamond Blade by

7005 Pearl Pro-V Diamond Blade
Check Price for 7005 Pearl Pro-V Diamond Blade

Pearl Pro-V Diamond Blade

  • Buy a Pearl 14″ Masonry Blade from now until the end of January & Save
  • Pearl Pro-V Masonry diamond blade was $75.99 now only $59.99
  • Huge 12mm tall diamond segments
  • Wet or dry cutting, laser welded.
  • For cutting concrete block, hard brick, paver bricks, reinforced concrete, refractory material, soft stone & sand stone
  • Use on masonry saws, walk behind saws max 20hp, & cut-off saws
  • 1″ & 3/4″ (20mm) adapter included.
  • High tensile strength core prevents blade wobble. Improves durability
  • Quantity pricing, buy 6 -14″ blades & save 10%
  • Pearl’s diamond blades are designed to excel in the harsh environment of cutting brick, block, asphalt & green concrete.


6123 Pearl Pro-V Wet/Dry Diamond Blade by

6123 Pearl Pro-V Wet/Dry Diamond Blade
Check Price for 6123 Pearl Pro-V Wet/Dry Diamond Blade

Pearl Pro-V Wet/Dry Diamond Blade

  • Tile, Ceramic Tile, Marble, Soft Stone, Porcelain. 10mm diamond rim height for longer life.
  • 10mm diamond rim height for longer life.
  • Strong 060″ steel core for clean, chip-free cutting.
  • 4″, 4-1/2″ use wet or dry.
  • 7″, 8″, 10″ use wet only.


  • 4″ – 20mm- 5/8″ arbor.
  • 4-1/2″ – 7/8″- 5/8″ arbor.
  • 7″, 8″, 10″ – 5/8″ arbor.

10pcs bulk available

  • 4″ reg – $12.99, 10pk. – $99.90
  • 4-1/2″ reg – $14.99, 10pk. – $119.90
  • 10″ reg – $35.99, 10pk. – $299.90


6060 MK-225 Porcelain Diamond Blade (Hot Dog) by

6060 MK-225 Porcelain Diamond Blade (Hot Dog)
Check Price for 6060 MK-225 Porcelain Diamond Blade (Hot Dog)

MK-225 Hot Dog Porcelain Diamond Blade

  • Premium grade wet only, thin-rim blade for porcelain & vitreous tile
  • The MK-225 Hot Dog blade has tension slots to prevent dishing and blade wobble
  • Diamond blade utilizes Micro Bead technology and a patent pending core slot design to provide a thinkerf; ensuring a consistent cutting edge and eliminating porcelain surface chipping even with the hardest porcelain tile Standard arbor size fits all tile saws.
  • 10″ 5pcs bulk available Only $274.95. ($54.99 each)
  • 4″ thru 10″ width is .50
  • 12″ and 14″ width is .80
  • The MK 10-Inch 5/8-Inch Arbor Hot Dog Diamond Blade is ideal for wet cutting of porcelain, vitreous and ceramic tile.
  • 12″ & 14″ Hot Dog Diamond Blades have a 1″ arbor.
  • Cuts 10% faster and lasts 20% longer than standard blades.
  • Eliminates porcelain surface chipping.


30822 Siri True Blue Dressing Stone by SIRI

30822 Siri True Blue Dressing Stone
Check Price for 30822 Siri True Blue Dressing Stone

Diamond Blade Dressing Stone.

  • Resin dressing stone will unleash the best cutting ability of all your diamond products, such as blades, hole saws, etc.
  • The special formatted grit is designed to sharpen and reactivate diamond blades, as they may have been glazed over by cutting super hard porcelain or many other types of material.


1057 Siri Mixing Paddles by

1057 Siri Mixing Paddles
Check Price for 1057 Siri Mixing Paddles
  • Buy a Siri Mixing Paddle and Save
  • Siri Cordless Drill Mixing Paddles.

    • Durable mixers easily fit into any cordless drill.
    • Mixing paddles, mud beater and spiral type.
    • 24″ long mud beater mixer
    • 24″ long spiral mixer
    • 17″ long spiral mixer
    • Quantity Discount Pricing buy 5pcs of any one type get 20% off


    7720 Sure-Guide Drilling Guide by Alpha

    7720 Sure-Guide Drilling Guide
    Check Price for 7720 Sure-Guide Drilling Guide

    Blowout Special, while supplies last

  • Sure Guide was $39.59 now only $32.99

    SureGuide Benefits & Features:

    • Drilling Holes Made Simple
    • 1″, 1-1/4″, 1-3/8″, 1-1/2″ bit sizes.
    • Sure-Guide’s all-in-one drill system is a unique and innovative design that combines simplicity and the latest technology for the Stone and Tile Industry.
    • Sure-Guide is a self-lubricating drill guide system that produces clean and accurate holes with ease every time.
    • Millions of dollars are spent every year correcting small preventable mistakes in the stone and tile industry.
    • This cost effective drill guide system will prevent run-away etching, burning, and cracking upon break through, protecting your finished product.
    • One of Sure-Guide’s greatest features is its ability to transform a multi-person project into a single-user task.
    • Using Sure-Guide’s three inch suction ring, and one of four different sized guides, anyone can drill a clean and precise hole every time.

    “US & Foreign Patents Pending”

    Drill a perfect hole!.

  • 4935 Tile Nipper for Hard Ceramics by Silver

    4935 Tile Nipper for Hard Ceramics
    Check Price for 4935 Tile Nipper for Hard Ceramics

    Tile Nipper for Hard Ceramics

    • Made in Japan from drop forged steel, carbide tips for long life.
    • Super tough carbide cutting edges for precision work and long life
    • Shapes and contours tiles
    • Drop forged steel construction
    • 5/8″ jaws opening
    • Return spring for opening and closing of jaws
    • Quantity discount, buy 3 Pcs pay only $10.99
    • .

    1067 Hydra XL Tile Grout Sponge by Hydra

    1067 Hydra XL Tile Grout Sponge
    Check Price for 1067 Hydra XL Tile Grout Sponge

    Hydra XL Tile Grout Sponge

    • 7-1/2″x 5-1/4″x 2-3/8″.
    • This Hydrophilic sponge is denser and more durable than similar imported sponges.
    • Made by Hydra in the USA.
    • Rounded edges to prevent “digging out” or marring of grout.
    • Excellent for removing excess grout, rince clean, the closest to a natural sponge.
    • HYDRA SPONGES are the best polyester sponges on the market.
    • They are Hydrophilic an extra manufacturing process gives these sponges tremendous water-holding capacity, more than any other polyester sponge!
    • The HYDRA SPONGE is the preferred washing sponge by professionals.
    • They are more durable than any other polyester sponge and more cost saving than any natural sponge.
    • They wash out clean, dry soft and are always uniform in size and quality..
    • Quantity discount 50, 100, 450 pcs.