Category: Target & Partner by Husqvarna

9581 Target by Husqvarna 14in. GC and DG Dri Disc Diamond Blades by

9581 Target by Husqvarna 14in. GC and DG Dri Disc Diamond Blades
Check Price for 9581 Target by Husqvarna 14in. GC and DG Dri Disc Diamond Blades

Target by Husqvarna GC and DG Dri Disc 14″ Green Concrete Diamond Blades

GC5 (super premium)

  • Cuts soft to medium aggregates and provides long life.
  • Total segment height: .335″ (.260″ diamond depth: .075″ segment base)

DG5 (premium)

  • For fast cutting of abrasive limestone aggregate and green concrete.
  • Total segment height: .275″(.200″ diamond depth: .075″ segment base)

Dry or wet cutting laser welded.

  • Job Size: Small to medium
  • Horsepower Range: 5-20 hp
  • Equipment types: High Speed, Small Walk-behind, and masonry saws
  • Cutting method: Wet or dry cutting
  • Bonding/Weld type: Laser weld
  • Arbor: 1″ / 20mm
  • To reduce undercutting when wet cutting with a dry blade, be sure to minimize blade / sub-base contact

.

Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Diamond Bades

9214 Husqvarna Scarifying Machine Accessories 1/2in Shaft by

9214 Husqvarna Scarifying Machine Accessories 1/2in Shaft
Check Price for 9214 Husqvarna Scarifying Machine Accessories 1/2in Shaft

Star Cutters for Husqvarna Mini planer/Scarifier

  • For general cleaning on concrete, removal of epoxy paint, oil, grease, glue or thermoplastic road markings.
  • 2″ O.D. x 1/2″ I.D. x .125″ Thick (51 x 13 x 3mm)

Beam Cutters

  • For dressing concrete and asphalt surfaces, anti-skid grooving (ramps, garages, farm yards, etc.) & de-scaling of steel decking.
  • 2″ O.D. x 5/8″ I.D. x .19″ Thick (51 x 16 x 5mm)

6mm Tungsten Carbide Cutters

  • High performance cutters used to modify surface textures on asphalt or concrete.
  • 2″ O.D. x 5/8″ I.D. x .25″ Thick (51 x 16 x 6mm).

15mm Tungsten Carbide Cutters

  • High performance cutters used to modify surface textures on asphalt or concrete.
  • Can also be used for coating removal.
  • 2″ O.D. x 5/8″ I.D. x .75″ Thick (51 x 16 x 19mm)

Wire Brush

  • Removes rust, de-scales, cleans shutters and polishes steel.
  • Customer-installed wire brush kit includes shaft assembly and six wire brushes.

Number of Pieces required for complete head assembly 1/2″ Shaft

    1/2″ Shaft
    Assembly
    Cutters
    Spacers
    Star
    108
    108
    Beam
    108
    108
    6mm Carbide Cutter
    88
    100
    15mm Carbide Cutter
    88
    100
    Wire Brush 180mm
    6
    0

.

Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Surface Preparation Tools

9217 Husqvarna 5400 Millenium Medium Bits Professional by

9217 Husqvarna 5400 Millenium Medium Bits Professional
Check Price for 9217 Husqvarna 5400 Millenium Medium Bits Professional
  • Buy a Husqvarna 5400 Millenium Medium Bit and Save

    • Husqvarna 5400 Millenium Medium Bits Professional

    High Performance

    • 5400 Medium is for drilling cured concrete with medium to soft aggregates with or without steel reinforcing.
    • Also effective on granite, marble and stone.
    • 14″ drilling depth
    • Total segment height: .400″ (.300″ diamond depth; .100″ segment base)
    • Wet cutting, brazed.
    • 3/8″ to 1-1/2″ have a 5/8″-11 thread adapter.
    • 1-5/8″ and above have a 1-1/4″-7 thread adapter.
    • 1″ to 8″ diameter are laser welded.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    9213 Husqvarna Mini Planer CG 200 S by

    9213 Husqvarna Mini Planer CG 200 S
    Check Price for 9213 Husqvarna Mini Planer CG 200 S

    Highly productive scarifier.

    • Fully adjustable handle in the down position, the Mini-Planer CG 200 S is easy to transport.
    • Removable side cover allows for easy and convenient drum changes.
    • Accepts the full range of steel and tungsten carbide flails/cutters.
    • Unit can be ordered complete with assembled drum and cutters.
    • Compact, rugged and highly portable.
    • Sturdy steel frame with 7-3/4″ (197mm) wide cutting path which minimizes the number of passes needed when scarifying or texturing large surface areas.
    • Depth control adjustment wheel is easy to use with limitless settings (wheel includes locking device).
    • Automatic reset to the preset cutting depth.
    • Adjustable cutting head height control and retractable handle for easy transportation.
    • Premium poly V-belt drives power to the drive shaft.
    • 1-1/2″ diameter vacuum port allows a dust collection device to be attached.
    • Removable side cover allows for easy replacement of cutter heads with no need to tilt machine.
    • Dual voltage 110v/230v Electric model, 11.5 Amps.

    Ideal For:

    • Sidewalk trip hazard repair
    • Concrete and Coatings removal
    • Floor cleaning and/or preparation
    • Traffic line and markings removal
    • Creating non-slip surfaces
    • Length 27″, width 15-1/2″

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Surface Preparation Tools

    9215 Husqvarna Complete Head Assembly Kits by

    9215 Husqvarna Complete Head Assembly Kits
    Check Price for 9215 Husqvarna Complete Head Assembly Kits

    Husqvarna Mini planer/Scarifier Complete Head Assembly Kits.

    Star Cutters

    • For general cleaning on concrete, removal of epoxy paint, oil, grease, glue or thermoplastic road markings.
    • 2″ O.D. x 1/2″ I.D. x .125″ Thick (51 x 13 x 3mm)

    Beam Cutters

    • For dressing concrete and asphalt surfaces, anti-skid grooving (ramps, garages, farm yards, etc.) & de-scaling of steel decking.
    • 2″ O.D. x 5/8″ I.D. x .19″ Thick (51 x 16 x 5mm)

    6mm Tungsten Carbide Cutters

    • High performance cutters used to modify surface textures on asphalt or concrete.
    • 2″ O.D. x 5/8″ I.D. x .25″ Thick (51 x 16 x 6mm)

    15mm Tungsten Carbide Cutters

    • High performance cutters used to modify surface textures on asphalt or concrete.
    • Can also be used for coating removal.
    • 2″ O.D. x 5/8″ I.D. x .75″ Thick (51 x 16 x 15mm)

    Wire Brush

    • Removes rust, de-scales, cleans shutters and polishes steel.
    • Customer-installed wire brush kit includes shaft assembly and six wire brushes.

    Number of Pieces required for complete head assembly 1/2″ Shaft

        1/2″ Shaft
        Assembly
        Cutters
        Spacers
        Star
        108
        108
        Beam
        108
        108
        6mm Carbide Cutter
        88
        100
        15mm Carbide Cutter
        88
        100
        Wire Brush 180mm
        6
        0

      .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Surface Preparation Tools

    9146 Target by Husqvarna FS 4800 D Electric Tracking Front Pivot by

    9146 Target by Husqvarna FS 4800 D Electric Tracking Front Pivot
    Check Price for 9146 Target by Husqvarna FS 4800 D Electric Tracking Front Pivot

    Husqvarna FS4800 D Electric Tracking Front Pivot

  • Free shipping from factory warehouse

    • Model FS4800D 14″ FS4800D 18″ FS4800D 26″ FS4800D 30″
    Arbor 1 in. 1 in. 1 in. Depth of Cut 4.5″ 6.5″ 10.5″ 12″
    Blade Guard Cap. 14″ 18″ 26″ 30″
    Blade Shaft Rpm 2,900 2,400 1,800 1,600

    Engine

    • Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
    • 42 hp at the blade shaft

    Power transmission.

    • Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
    • Power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class.

    Other Features

    • Slip-on blade guard comes with auto-latch for easy removal and installation.
    • Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
    • Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
    • The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
    • Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
    • Front pivot model has a patent pending electric tracking system, which allows operator to make tracking adjustments with a switch while cutting.
    • Electro-hydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator.

    Professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
    Power transmission system has a right angle gearbox configuration.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Concrete Saws

    9147 Target by Husqvarna FS 4800 D Rear Pivot by

    9147 Target by Husqvarna FS 4800 D Rear Pivot
    Check Price for 9147 Target by Husqvarna FS 4800 D Rear Pivot

    Husqvarna FS4800 D Rear Pivot

  • Free shipping from factory warehouse
  • Rear pivot model offers an electrically controlled hydraulic differential system which locks rear wheels for positive traction to prevent slipping.

    • Model FS4800D 14″ FS4800D 18″ FS4800D 26″ FS4800D 30″
    Arbor 1 in. 1 in. 1 in. 1 in.
    Depth of Cut 4.5″ 6.5″ 10.5″ 12″
    Blade Guard Cap. 14″ 18″ 26″ 30″
    Blade Shaft Rpm 2,900 2,400 1,800 1,600

    Engine

    • Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
    • 42 hp at the blade shaft

    Power transmission.

    • Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
    • Power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class.

    Other Features

    • Slip-on blade guard comes with auto-latch for easy removal and installation.
    • Positive locking detent for gearbox shift lever eliminates possibility of slipping out of gear.
    • Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
    • The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
    • Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
    • Rear pivot for repetitive cuts, saw is easier to maneuver
    • Electro hydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator.

    For large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
    Power transmission system has a right angle gearbox configuration.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Concrete Saws

    9151 Husqvarna 5300 Millenium Medium Bits Professional by

    9151 Husqvarna 5300 Millenium Medium Bits Professional
    Check Price for 9151 Husqvarna 5300 Millenium Medium Bits Professional

    Husqvarna 5300 Millennium Medium Bits Professional Grade

    • 5300 Medium is for good balance of speed and life for drilling medium-hard to hard concrete with medium to heavy steel reinforcing.
    • Also effective on granite, marble and stone.
    • 14″ drilling depth
    • Total segment height: .320″ (.250″ diamond depth; .070″ segment base)
    • 1″, 1-1/2″ have 5/8″-11 arbor.
    • All other sizes have 1-1/4″-7 thread adapter.
    • Wet cutting, brazed.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    9145 Target by Husqvarna FS 4800 D Front Pivot by

    9145 Target by Husqvarna FS 4800 D Front Pivot
    Check Price for 9145 Target by Husqvarna FS 4800 D Front Pivot

    Husqvarna FS4800 D Front Pivot

  • Free shipping from factory warehouse

    • Model FS4800D 14″ FS4800D 18″ FS4800D 26″ FS4800D 30″
    Arbor 1 in. 1 in. 1 in. 1 in.
    Depth of Cut 4.5″ 6.5″ 10.5″ 12″
    Blade Guard Cap. 14″ 18″ 26″ 30″
    Blade Shaft Rpm 2,900 2,400 1,800 1,600

    Engine

    • Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
    • 42 hp at the blade shaft

    Power transmission

    • Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
    • Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

    Other Features

    • Slip-on blade guard comes with auto-latch for easy removal and installation.
    • Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
    • Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
    • The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
    • Electrohydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator; optional electric clutch – blade drive disengagement system
    • Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.

    Professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
    Power transmission system has a right angle gearbox configuration.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Concrete Saws
    1. Pages:
    3. 1
    4. 2
    5. 3
    6. 4
    7. 5
    8. 6
    9. 7
    10. 8
    11. 9
    12. 10
     Recent Entries »