Category: Target & Partner by Husqvarna
6716 Target by Husqvarna Guardmatic Wheel Kit by Husqvarna
6717 Target by Husqvarna Repl. Ergonomic Handle Kit by Husqvarna
6720 Husqvarna TS510 20in Guardmatic Gas Series by
Guardmatic TS-510 20″ Gas Masonry Saw Features
Engines
- High-powered 8 or 11 net hp, (9 & 13 hp max) Honda engine
- Dual element cyclone filter for dust filtration
Two Pivot Points
- Only two pivot points for reduced saw maintenance and longer diamond blade life
- Cutting head pivot on bearings which are sealed and lubricated for life – no greasing required!
- Bearings are seated in a machined saddle, on a heavy-duty support, for precise alignment that lasts
Quick-Mount Cutting Head
- Patented cutting head allows easy removal of the power head for transportation
- Solid lock-down knobs are hand operated; no tools are required
- Bearing collar folds down, entire cutting head assembly can be lifted of easily
- Spring tension counter-balances the cutting head, making raising and lowering easy
- Cutting head height can be controlled with a convenient crank control and / or foot pedal
Sta-Level Blade Guard
- Keeps the blade guard parallel to the cutting table for accurate cuts
- The one-piece heavy-duty blade guard has a built-in OSHA required “lip” for operator safety
- The ergonomically designed steel handle with molded grip bolts securely into place
- Blade flanges are precision-machined for secure clamping of the blade
Conveyor Cart
- Large conveyor cart is a durable, cast aluminum cart for strength and rigidity
- 16-5/8″ long x 22-3/4″ wide
- The vulcanized rubber top is permanently bonded to the cart and has a durable ruler for quick, easy measurements
- The included aluminum rip guide assures straight cuts
Other Features
- “X” braced steel frame resists flexing
- Blade flanges are precision-machined for secure clamping of the blade
- Field installable blade shaft assembly
- Electric water pump is self-priming and thermally protected
- Integrated water system is easy to clean and service
- Water flow valve is a solid brass fixture.
- Brass water tubes are built into either side of the guard for long life and easy service
- Blade sold separately.
.
6725 Husqvarna Portasaw TS355 Masonry Saw Series by
Portasaw TS355 Masonry Saw
- Free shipping from factory warehouse
- Free Stand with any PortaSaw purchased.
Blade-shaft and Bearings
- Provide extended blade life and reduces maintenance.
- Blade flanges are precision-machined for secure clamping of the blade
- Field installable blade shaft assembly reduces downtime when replacement is required.
- Sta-Level Blade Guard Keeps the blade guard parallel to the cutting table.
- Frame heavy-duty, jig welded “X” braced steel; open throat design for unlimited rip cutting
- Dimensions 38″x19.5″.x27.5″
Water pump
- Electric High output submersible; totally epoxy-sealed with built-in thermal overload protection.
- Gas High capacity, belt driven, solid bronze; intake strainer; built-in priming pump and check valve
Motor Specifications:
- PS-1411-S 110 Volts, 14.4 Amps.
PS-1411 115/208-230 Volts, 17.2/9.5 Amps
PS-1421 115/208-230 Volts, 16.8/8.3 Amps
PS-1431 220 Volts, 13 Amps
PS-1455-Honda GX160, Gas 5.5 hp motor
.
6783 Husqvarna TDGH Diamond Grinding Heads by
Husqvarna TDGH Grinding Heads
- General purpose.
- TDGH (10 and 12 segments) is for fast removal.
- TDGH (20 and 22 segments) is for a smooth finish.
Features:
- For smoothing rough or patched floors and feathering uneven joints or slab panels; removing hard epoxies, urethane and other coatings or toppings; and grinding down bumps, raised or curled sidewalk panels.
- Two separate bolt hole patterns mount on a majority of grinding machines.
- Total segment height: .300″ diamond segment.
- 12″ diameter TDGH grinding heads are to be used with Single Head Grinder only.
- Need adapter kit item no. 177861 for TDGH Grinding Heads to mount on Dual Trac Grinder.
.
6640 Target by Husqvarna FS3500G Concrete Saw by
Husqvarna FS3500G Series Features
The Husqvarna FS3500 G features a well-balanced, low profile design. The design makes it an ideal saw for small to medium jobs.
| Model | FS3500G 18″ | FS3500G 26″ | FS3500G 30″ |
| Arbor | 1 in. | 1 in. | 1 in. | Depth of Cut | 6.5″ | 10.5″ | 12″ | Blade Guard Cap. | 18″ | 26″ | 30″ |
| Blade Shaft Rpm | 2,750 | 1,750 | 1,530 |
Engine
- 35 hp Wisconsin gasoline engine
- 26 hp at the blade shaft
- Meets current EPA requirements
Wheels
- Sealed ball bearing, maintenance-free polyurethane front wheels
- Covered rear wheels
Other Features
- Fully enclosed transmission
- One-piece water manifold with multiple jets
- Lift bail is standard on all models
- Box frame is the most rigid available and provides long life and less stress on the blade shaft and bearings
- Turbo-style cyclone pre-cleaner reduces filter maintenance
- Progressive restriction indicator for air filter
- Complete back lit instrument panel with tachometer, hour meter, voltmeter, and oil pressure gauges
- Cutting depth indicator clearly shows depth of blade in the cut is adjustable for all blade diameters
- Single lever for forward/reverse, raise/lower offers reliable and infinite variable ground speed control and allows the blade to quickly be raised and lowered
- Separate neutral engage lever is mounted on the cowl and allows for quick disengage of transmission for ease in transport
- Arbor guard/nose latch and a blade guard handle are standard.
- FS 3500 can accommodate slip-on blade guards up to 30″.
- One piece manifold with multiples jets.
- Cyclone pre-cleaner reduces filter maintenance.
- Dual arbors allows the blade to be mounted on either end of bladeshaft for right or left cutting.
- For maximum engine protection, the air filter has a progressive restriction indicator.
.
6670 Target by Husqvarna Portacut IV Self Propelled Series by
Portacut IV Self Propelled Series Features
- PAC IV 13 hp or 20 hp Honda gasoline engine
| Portacut IV | 13hp | 20hp | Motor | Honda | Honda |
| Horsepower | 13 hp. | 20 hp. |
| Arbor | 1 in. | 1 in. |
| Depth of Cut | 6-5/8″ | 7-5/8″ | Blade Guard Capacity | 18″ | 20″ | Blade Shaft Rpm | 2,650 | 2,610 |
Blade shaft System
- 3VX blade shaft drive transmits more horsepower and provides longer belt life
- Fully machined pulleys extend overall service life
- Precision-machined, 1″ inner blade flange protects the shaft from damage when blade spins
Other Features
- Extra heavy-duty cyclone air filter on models with Honda engines
- Blade depth indicator standard
- Positive screw feed raises/lowers blade quickly and easily. The lock keeps the blade at a fixed depth
- Bilingual Lexan plastic decal provides the operator with convenient operating instructions and safety information in English and Spanish
- Transmission control lever offers reliable and infinite variable ground speed control. 0 – 80 ft/min
- Engine start/stop switch, key start/stop on electric models and push stop button on recoil models
- Transmission engagement lever engages hydrostat transmission and allows for neutral free-wheeling
.
6700 Target by Husqvarna FS400 Concrete Saw by Husqvarna
Husqvarna FS400 Concrete Saw
Free Blade Rebate Form
The Husqvarna FS 400 is a robust, convenient all-around flat saw. The adjustable handle ensures low vibrations and an ergonomic working position. Perfect weight distribution means excellent stability while sawing. Ideal for small jobs.
- Poly V-belt for optimal transmission of power
- Patented, gas assist raise/lower system, and fold down handle on feed wheel
- Large water tank made of impact-resistant plastic with quick connection for water hose to the upper part of the blade guard. No tools requires for disassembly.
- Wheels have ball bearings and waterproof seals for reduced maintenance.
- Depth of cut indicator can be adjusted for different diameter blades
- Retractable hand wheel The hand wheel can be folded when moving the saw to avoid breakage.
- 18″ (450mm) blade capacity, 6-5/8″ (168mm) depth of cut.
- Motor Honda GX390 11 hp net 13 hp max.
.
6705 Target by Husqvarna MG Series Green Concrete Saw by
Target by Husqvarna MG Series Green Concrete Saw
| Model | MG-8 | MG-10 | Horsepower | 4 hp. | 6.5 hp. |
| Arbor | 5/8″ | 5/8″ | Depth of Cut | 2.1/2″ | 3-1/2″ | Blade Guard Cap. | 8″ | 10″ |
| Blade Shaft Rpm | 4,200 Rpm | 4,200 Rpm |
Engines
- MG 8,10-4 – Honda 4 hp GX120
- MG 8,10-6.5 – Honda 6.5 hp GX200
- Blade drive 10 groove, poly V-belt
Raise / Lower System
- The patent pending raise / lower system has an integrated depth stop to allow the depth to be set once and easily returned to, no matter how many times the saw is removed from the cut
- When raised out of the cut, the saw locks into the “up” position
Polyurethane Wheels
- Saw is designed with over-sized polyurethane wheels with sealed ball bearings to absorb vibration
- Larger wheels help spread the weight of the saw over a wider area
Sealed Bladeshaft
- Protects shaft and bearings from dust
- Eliminates the need for daily greasing
Belt Tensioning System
- New design allows belt tension to be maintained without removing guards
Blade Guard and Frame
- Unique blade guard system directs dust to areas outside the cut for easier cleanup and reduced dust at the jobsite
- Upcut blade rotation helps to keep the cut clear
.