Best Door Tools Store

8″ x 8″ Fire Rated Insulated Recessed Door with Flange The BA-FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour “B” label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24″ x 36″) – Application: – For all types of walls and ceilings- This door should be used in walls when temperature rise or heat transmission is a factor. Product Features – Insulated door panel – Concealed hinge – Self-closing – Self-Latching- Inside latch release BA-FB-5050 Access Door Specifications: – Door / Door Frame: Steel 20 gage door,16 gage mounting frame Door filled with 2″ thick fire rated insulation, flange to be 1″ wideHinge: Concealed- Fire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label Max size: 36 x 48. (Ceilings): Warnock Hersey International 3 hour rated in a non-combustible ceiling. 1 hour rated in a combustible ceiling. Max size: 24 x 36 – Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for mortise cylinder locks.- Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked-on enamel.

32″ x 32″ – Fire Rated Un-Insulated Access Door with Drywall Flange . BA-PFN-GYP access Hatch is not insulated and can only be used on fire rated walls, specifically those made of drywall. Once a sufficient layer of drywall compound is applied to its corner bead flange it will leave only the door panel visible for a much better finished look. As per UL standards, once the installation is complete and the provided springs installed, this access door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-GYP door available is: (36″ x 36″ ).BA-PFN-GYP fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat . For installation in vertical wall assemblies 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. /h3> MEA # 507-06-M /h3> Fire rated by Intertek – Warnock Hersey.

24″ x 36″- Fire Rated Un-Insulated Access Door with Drywall Flange . BA-PFN-GYP access Hatch is not insulated and can only be used on fire rated walls, specifically those made of drywall. Once a sufficient layer of drywall compound is applied to its corner bead flange it will leave only the door panel visible for a much better finished look. As per UL standards, once the installation is complete and the provided springs installed, this access door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-GYP door available is: (36″ x 36″ ).BA-PFN-GYP fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat . For installation in vertical wall assemblies 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. /h3> MEA # 507-06-M /h3> Fire rated by Intertek – Warnock Hersey.

16″ x 16″ Fire Rated Un-Insulated Access Door with Flange Approved by Underwriters Laboratories (UL) for 1 ½ hours “B” label in walls and ULC for 2 hours “B” label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.   In-Stock and Ready to Ship !     Download Technical Data / Submittal Sheet (BA-FB-5060)   Application: • Designed to provide access in walls, while maintaining an invisible, architecturally pleasing appearance Product Features   Product Features • Concealed hinge • Self-closing • Self-Latching• Inside latch release  BA-FB-5060 Access Door Specifications: Door / Door Frame: Steel 16 gage door, 16 gage mounting frame. Flush to frame with reinforced edges, flange to be 1″ wideHinge: ConcealedFire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label. (optional)Max size 36 x 48Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.Finish: Steel: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel. Â.

24″ x 24″ – Fire Rated Un-Insulated Access Door with Drywall Flange . BA-PFN-GYP access Hatch is not insulated and can only be used on fire rated walls, specifically those made of drywall. Once a sufficient layer of drywall compound is applied to its corner bead flange it will leave only the door panel visible for a much better finished look. As per UL standards, once the installation is complete and the provided springs installed, this access door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-GYP door available is: (36″ x 36″ ).BA-PFN-GYP fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat . For installation in vertical wall assemblies 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. /h3> MEA # 507-06-M /h3> Fire rated by Intertek – Warnock Hersey.