Best Door Tools Store

24″ x 24″ Fire Rated Insulated Upward Opening Ceiling Door . BA-PFU access hatch is designed to be installed on fire rated ceilings only. It can easily replace spring loaded models like the PFI. Its door which does not exceed 89 degrees of upward opening, falls back by law of gravity into its locked position as required by fire certification strandards. Holding the door open while climbing through it becomes much easier with no springs to deal with. The largest fire rated PFU available is: (24″ x 36″ or 864 sq inches).BA-PFU fire rated access Panel specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: mineral wool Hinge: Continuous piano hinge allows opening to 89 deg Lock / latch: Self latching ring operated slam latch inside and a hex head slam latch outside Finish: DuPont high quality white powder coat Fire Rating: For horizontal ceiling assemblies only Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F/139 deg C at 30 mins, 450 deg F/250 deg C at 60 mins. Maximum door size: 24″ x 36″ or 864 sq inches (see note)*Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey * Note: Maximum door size 24″ x 36″ can also be calculated by multiplying the surface area of the door (24″x36″). The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches. /p>.

22″ x 36″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..

22″ x 30″ Fire Rated Insulated Upward Opening Ceiling Door . BA-PFU access hatch is designed to be installed on fire rated ceilings only. It can easily replace spring loaded models like the PFI. Its door which does not exceed 89 degrees of upward opening, falls back by law of gravity into its locked position as required by fire certification strandards. Holding the door open while climbing through it becomes much easier with no springs to deal with. The largest fire rated PFU available is: (24″ x 36″ or 864 sq inches).BA-PFU fire rated access Panel specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: mineral wool Hinge: Continuous piano hinge allows opening to 89 deg Lock / latch: Self latching ring operated slam latch inside and a hex head slam latch outside Finish: DuPont high quality white powder coat Fire Rating: For horizontal ceiling assemblies only Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F/139 deg C at 30 mins, 450 deg F/250 deg C at 60 mins. Maximum door size: 24″ x 36″ or 864 sq inches (see note)*Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey * Note: Maximum door size 24″ x 36″ can also be calculated by multiplying the surface area of the door (24″x36″). The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches. /p>.

22″ x 30″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..

18″ x 18″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..

24″ x 48″ Fire Rated Un-Insulated Access Door with Flange Approved by Underwriters Laboratories (UL) for 1 ½ hours “B” label in walls and ULC for 2 hours “B” label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.   In-Stock and Ready to Ship !     Download Technical Data / Submittal Sheet (BA-FB-5060)   Application: • Designed to provide access in walls, while maintaining an invisible, architecturally pleasing appearance Product Features   Product Features • Concealed hinge • Self-closing • Self-Latching• Inside latch release  BA-FB-5060 Access Door Specifications: Door / Door Frame: Steel 16 gage door, 16 gage mounting frame. Flush to frame with reinforced edges, flange to be 1″ wideHinge: ConcealedFire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label. (optional)Max size 36 x 48Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.Finish: Steel: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel. Â.

22″ x 22″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly..

12″ x 12″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..

24″ x 24″ Fire Rated Insulated Recessed Door with Flange The BA-FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour “B” label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24″ x 36″) – Application: – For all types of walls and ceilings- This door should be used in walls when temperature rise or heat transmission is a factor. Product Features – Insulated door panel – Concealed hinge – Self-closing – Self-Latching- Inside latch release BA-FB-5050 Access Door Specifications: – Door / Door Frame: Steel 20 gage door,16 gage mounting frame Door filled with 2″ thick fire rated insulation, flange to be 1″ wideHinge: Concealed- Fire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label Max size: 36 x 48. (Ceilings): Warnock Hersey International 3 hour rated in a non-combustible ceiling. 1 hour rated in a combustible ceiling. Max size: 24 x 36 – Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for mortise cylinder locks.- Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked-on enamel.

16″ x 16″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly.The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..