Category: Fire-Rated Doors

Fire Access Door 18 x 18 BA-PFN-PLY Drywall Access Panel with Flange – BEST

Fire Access Door 18 x 18 BA-PFN-PLY Drywall Access Panel with Flange - BEST
Check Price for Fire Access Door 18 x 18 BA-PFN-PLY Drywall Access Panel with Flange - BEST

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4″ lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36″ x 36″). BA-PFN-PLY fire rated access door specifications, – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36″ x 36″. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek – Warnock Hersey LEED Certification: This access door can contribute directly to a project’s ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors.

10″ x 10″ Fire Rated Un-Insulated Access Door with Flange – BEST

10
Check Price for 10

10″ x 10″ Fire Rated Un-Insulated Access Door with Flange Approved by Underwriters Laboratories (UL) for 1 ½ hours “B” label in walls and ULC for 2 hours “B” label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.   In-Stock and Ready to Ship !     Download Technical Data / Submittal Sheet (BA-FB-5060)   Application: • Designed to provide access in walls, while maintaining an invisible, architecturally pleasing appearance Product Features   Product Features • Concealed hinge • Self-closing • Self-Latching• Inside latch release  BA-FB-5060 Access Door Specifications: Door / Door Frame: Steel 16 gage door, 16 gage mounting frame. Flush to frame with reinforced edges, flange to be 1″ wideHinge: ConcealedFire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label. (optional)Max size 36 x 48Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.Finish: Steel: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel. Â.

Rated Access Doors BA-PFN Fire Rated Un-Insulated with Flange 22 x 22 – BEST

Rated Access Doors BA-PFN Fire Rated Un-Insulated with Flange 22 x 22 - BEST
Check Price for Rated Access Doors BA-PFN Fire Rated Un-Insulated with Flange 22 x 22 - BEST

22″ x 22″- Fire Rated Un-Insulated Access Door with Flange. The BA-PFN Wall access Hatch is not insulated and can only be used on fire rated walls. It comes with a 1″ flange for an easy flush installation on any type of surface material. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN door available is: (36″ x 36″ ). BA-PFN fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: For installation in vertical wall assemblies only. 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36″ x 36″. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey.

Best Access Doors Fire Rated BA-PFN 22 x 30 Un-Insulated with Flange

Best Access Doors Fire Rated BA-PFN 22 x 30 Un-Insulated with Flange
Check Price for Best Access Doors Fire Rated BA-PFN 22 x 30 Un-Insulated with Flange

22″ x 30″ – Fire Rated Un-Insulated Access Door with Flange. The BA-PFN Wall access Hatch is not insulated and can only be used on fire rated walls. It comes with a 1″ flange for an easy flush installation on any type of surface material. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN door available is: (36″ x 36″ ). BA-PFN fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: For installation in vertical wall assemblies only. 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36″ x 36″. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey.

Rated Access Doors BA-PFN-PLY Fire Rated Drywall Access Panel with Flange 22 x 22 – BEST

Rated Access Doors BA-PFN-PLY Fire Rated Drywall Access Panel with Flange 22 x 22 - BEST
Check Price for Rated Access Doors BA-PFN-PLY Fire Rated Drywall Access Panel with Flange 22 x 22 - BEST

The BA-PFN-PLY access door is not insulated and can only be used on fire rated walls, specifically those made of plaster. Once covered with plaster, the 2 3/4″ lath flange will disappear, leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN-PLY door available is: (36″ x 36″). BA-PFN-PLY fire rated access door specifications, – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies 2 hour fire barrier, rating 11/2 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36″ x 36″. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. : MEA # 507-06-M Fire rated by Intertek – Warnock Hersey LEED Certification: This access door can contribute directly to a project’s ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors.

12″ x 12″ Fire Rated Un-Insulated Access Door with Flange – BEST

12
Check Price for 12

12″ x 12″ Fire Rated Un-Insulated Access Door with Flange Approved by Underwriters Laboratories (UL) for 1 ½ hours “B” label in walls and ULC for 2 hours “B” label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.   In-Stock and Ready to Ship !     Download Technical Data / Submittal Sheet (BA-FB-5060)   Application: • Designed to provide access in walls, while maintaining an invisible, architecturally pleasing appearance Product Features   Product Features • Concealed hinge • Self-closing • Self-Latching• Inside latch release  BA-FB-5060 Access Door Specifications: Door / Door Frame: Steel 16 gage door, 16 gage mounting frame. Flush to frame with reinforced edges, flange to be 1″ wideHinge: ConcealedFire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label. (optional)Max size 36 x 48Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.Finish: Steel: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel. Â.

Fire Rated Access Panels BA-PFI 8 x 8 Insulated with Flange – BEST

Fire Rated Access Panels BA-PFI 8 x 8 Insulated with Flange - BEST
Check Price for Fire Rated Access Panels BA-PFI 8 x 8 Insulated with Flange - BEST

8″ x 8″ – Fire Rated Insulated Access Door with Flange. BA-PFI access Hatch is insulated with 2″ thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1″ flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches). BA-PFI fire rated access Panel specifications, Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat . Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey.

Rated Access Doors BA-PFI-PLY Fire Rated Plaster Access Panel with Flange 36″ x 36″ – BEST

Rated Access Doors BA-PFI-PLY Fire Rated Plaster Access Panel with Flange 36
Check Price for Rated Access Doors BA-PFI-PLY Fire Rated Plaster Access Panel with Flange 36

36″ x 36″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″ or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly.The maximum surface area is 864 sq inches. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..

Fire Rated Access Panels BA-PFN 8 x 8 Un-Insulated with Flange – BEST

Fire Rated Access Panels BA-PFN 8 x 8 Un-Insulated with Flange - BEST
Check Price for Fire Rated Access Panels BA-PFN 8 x 8 Un-Insulated with Flange - BEST

8″ x 8″ – Fire Rated Un-Insulated Access Door with Flange. The BA-PFN Wall access Hatch is not insulated and can only be used on fire rated walls. It comes with a 1″ flange for an easy flush installation on any type of surface material. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN door available is: (36″ x 36″ ). BA-PFN fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: For installation in vertical wall assemblies only. 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36″ x 36″. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey.

Fire Rated Access Doors BA-PFN 10 x 10 Un-Insulated with Flange – BEST

Fire Rated Access Doors BA-PFN 10 x 10 Un-Insulated with Flange - BEST
Check Price for Fire Rated Access Doors BA-PFN 10 x 10 Un-Insulated with Flange - BEST

10″ x 10″ – Fire Rated Un-Insulated Access Door with Flange. The BA-PFN Wall access Hatch is not insulated and can only be used on fire rated walls. It comes with a 1″ flange for an easy flush installation on any type of surface material. As per UL standards, once the installation is complete and the provided springs installed, this door will be self closing and self locking. It should not be used in situations where protection against temperature elevation is required. The largest fire rated PFN door available is: (36″ x 36″ ). BA-PFN fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: For installation in vertical wall assemblies only. 2 hour fire barrier, rating 1 frac12 hours. Access/Door Frame Assembly (uninsulated) for installation in vertical wall assemblies. Maximum door size of: 36″ x 36″. Standards listed: NFPA 252-2003, UL 10b, UL-555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey.

Recent Entries »