Best Door Tools Store

The BA-PFI-HS High Security access door is insulated with 2″ thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1″ flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48″ x 48″) and (24″ x 36″ or 864 sq inches). BA-PFI-HS fire rated access door specifications, – Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Mortise slam latch with cylinder Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400°F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250°F (139°C) at 30 mins, 450°F (250°C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey LEED Certification: The BA-PFI access door can contribute directly to a project’s ability to achieve LEED certification: USA LEED-NC.

7″ x 12″ Grease Duct Access Panel The BA-GDD is a UL and ULC listed access door for installation into grease ducts. The 16 gage steel construction along with the high temperature resistant gasket and sealant allows this door to be grease tight and airtight. This door meets or exceeds requirements of all mechanical codes. – Application – Access door for installation in Kitchen Exhaust Systems- This door meets or exceeds requirements of all mechanical codes Product Features – Bolt in unit easily installed into existing ductwork- Duct cutout template included- No bolts penetrate to the interior of the duct- Two handles for easy removal and installation- 16 Gage galvanized steel- N.F.P.A. #96.

8″ x 8″ Fire Rated Insulated Access Door with Flange for Drywall The BA-FW-5050-DW drywall, insulated fire rated access door is an enhanced BA-FW-5050 that includes a galvanized steel drywall taping bead flange to facilitate installation in drywall. The Acudor FW-5050 is an insulated, fire rated access door approved for use in walls and ceilings. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour “B” label, with a maximum temperature rise of 250 degrees after 30 minutes. This door should be used in walls when temperature rise or heat transmission is a factor. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24″ x 36″) – Application- For drywall, walls and ceilings with galvanized steel drywall taping bead flange. For when temperature rise or heat transmission is a factor. Product Features- Insulated door panel – Concealed hinge – Self-Latching – Inside latch release- Drywall taping bead flange – Self-closing FW-5050 Access Door Specifications:- Door / Door Frame: Steel or Stainless Steel: 20 gage door,16 gage mounting frame Door filled with 2″ thick fire rated insulation, flange to be drywall taping bead flange Hinge: Concealed- Fire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label. Max size: 36 x 48. (Ceilings): Warnock Hersey International 3 hour rated in a non-combustible ceiling. 1 hour rated in a combustible ceiling. Max size: 24 x 36 – Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for mortise cylinder locks.- Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked-on enamel..

8″ x 8″ – Fire Rated Insulated Access Door with Plaster Flange. BA-PFI-PLY is the ideal solution for plaster covered fire rated walls and ceilings. Once covered with plaster, the 2 3/4″ lath flange will disappear leaving only the door panel visible. As per UL standards, once the installation is complete and the provided springs are hooked to the back of the panel, this access door will be self closing and self locking. The largest fire rated PFI-PLY access doors available for vertical and horizontal installations are respectively: (48″ x 48″ ) and (24″ x 36″or 864 sq inches).BA-PFI-PLY fire rated access door specifications, Submittal Sheet – Material: 16 gauge cold rolled steel frame and 20 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Self latching tool-key operated slam latch and/or ring operated slam latch, both included Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat 1 For installation in vertical wall assemblies: Rating 1 1/2 hours . Temperature rise: 250 deg F (139 deg C) at 30 mins and 450 deg F (250 deg C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400 deg F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250 deg F (139 deg C) at 30 mins, 450 deg F (250 deg C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. The maximum height or width is 36″. All door sizes equal or smaller than 864 sq inches fall within the standards. Ex. Door size of 28″ x 28″ = 784 sq inches..

The BA-PFI-HS High Security access door is insulated with 2″ thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1″ flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48″ x 48″) and (24″ x 36″ or 864 sq inches). BA-PFI-HS fire rated access door specifications, – Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Mortise slam latch with cylinder Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey LEED Certification: The BA-PFI access door can contribute directly to a project’s ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors.

The BA-PFI-HS High Security access door is insulated with 2″ thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1″ flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48″ x 48″) and (24″ x 36″ or 864 sq inches). BA-PFI-HS fire rated access door specifications, – Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Mortise slam latch with cylinder Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey LEED Certification: The BA-PFI access door can contribute directly to a project’s ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors Note 1: Maximum door size 24″ x 36″ can also be calculated by multiplying the surface area of the door (24″x36″)..

The BA-PFI-HS High Security access door is insulated with 2″ thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1″ flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48″ x 48″) and (24″ x 36″ or 864 sq inches). BA-PFI-HS fire rated access door specifications, – Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Mortise slam latch with cylinder Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400°F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250°F (139°C) at 30 mins, 450°F (250°C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. The BA-PFI access door can contribute directly to a project’s ability to achieve LEED certification: USA LEED-NC New Construction & Major Renovations LEED for Schools LEED-CI Commercial Interiors CANADA LEED Canada-NC New Construction & Major Renovations LEED Canada-CI Commercial Interiors Note 1:.

18″ x 18″ Fire Rated Un-Insulated Access Door with Flange Approved by Underwriters Laboratories (UL) for 1 ½ hours “B” label in walls and ULC for 2 hours “B” label in walls. Designed to maintain continuity in a 2-hour fire barrier wall, the FB-5060 should be used whenever it is necessary to provide access in fire rated walls, when temperature rise is not a factor.   In-Stock and Ready to Ship !     Download Technical Data / Submittal Sheet (BA-FB-5060)   Application: • Designed to provide access in walls, while maintaining an invisible, architecturally pleasing appearance Product Features   Product Features • Concealed hinge • Self-closing • Self-Latching• Inside latch release  BA-FB-5060 Access Door Specifications: Door / Door Frame: Steel 16 gage door, 16 gage mounting frame. Flush to frame with reinforced edges, flange to be 1″ wideHinge: ConcealedFire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label. (optional)Max size 36 x 48Standard Latch: Universal self-latching bolt, operated by either a knurled knob or flush key. When master keying is required, doors can be prepared for rim or mortise cylinder locks.Finish: Steel: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel. Â.

The BA-PFI-HS High Security access door is insulated with 2″ thick mineral wool and can be used on fire rated walls and ceilings. It comes with a 1″ flange for an easy flush installation on any type of surface. As per UL and NFPA standards, once the installation is complete and the provided springs are hooked to the back of the panel, the door will be self closing and self locking. The largest fire rated PFI doors available for vertical and horizontal installations with temperature rise are respectively: (48″ x 48″) and (24″ x 36″ or 864 sq inches). BA-PFI-HS fire rated access door specifications, – Material: 14 gauge cold rolled steel frame and 16 gauge galvanneal steel door Insulation: 2″ mineral wool Hinge: Continuous piano hinge Lock / latch: Mortise slam latch with cylinder Inside panel release: Included on all slam latch fire doors Automatic panel closer: Standard on all doors Finish: DuPont high quality white powder coat Packaging: Individually wrapped, 1 per box Fire Rating: For installation in vertical wall assemblies: Rating 1 1/2 hours. Temperature rise: 250°F (139°C) at 30 mins and 450°F (250°C) at 60 mins. Maximum door size of 48″ x 48″. Rating 3 hours. Temperature rise: 400°F at 60 mins. Maximum door size of 48″ x 48″. For installation in horizontal ceiling assemblies: With temperature rise: Rating 3 hours for non-cumbustible assembly and 1 hour for combustible assembly: Temperature rise: Max 250°F (139°C) at 30 mins, 450°F (250°C) at 60 mins. Maximum door size of 24″ x 36″ or 864 sq inches (see note 1) Without temperature rise: Rating: 3 hours for non-combustible assembly and 1 hour for combustible assembly. Standards listed: NFPA 252-2003, UL 10(b), UL 555, CAN/ULC S112 M90-R2001, CAN/ULC S104-10. MEA # 507-06-M Fire rated by Intertek – Warnock Hersey LEED Certification:.

24.5″ x 36.5″ Fire Rated Insulated Access Door – Upward Opening The BA-FW-5050-UP is an upswing fire rated access door approved for installation in ceilings. This door has been approved by Warnock Hersey International for three hours, with a maximum size of 24″ x 36″. The door panel is insulated and has a coil spring for dampening when closing. The BA-FW-5050-UP is available in both steel with a prime coat of white baked enamel and also stainless steel with a #4 satin polish – Application- An insulated, fire rated access door for inward opening in ceilings Product Features- For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (max. size to 24″ x 36″)- Insulated Door Panel- Self-Closing- Self-Latching- Inside Latch Release FW-5050-UP Access Door Specifications:- Material: Steel – Door: 16 gauge, Flush to frame with reinforced edges filled with 2″ thick fire insulation- Mounting Frame: 16 gauge mounting frame, with trim 1″ wide- Hinge: Concealed with coil spring for dampening- Fire Rating (Walls): UL — 1-1/2 hour “B” label. ULC — 2 hour “B” label.Max size: 24 x 36. For Ceilings: Warnock Hersey International 3 hour rated in a non-combustible ceiling. 1 hour rated in a combustible ceiling. Max size: 24x 36- Standard Latch: L Handle – operable from both sides- Finish: Steel: 5 stage iron phosphate preparation with prime coat of white baked-on enamel..