Best Door Tools Store

10″ x 10″ Flush Access Door with Drywall Bead Flange Designed specifically for installation in drywall walls and ceilings after drywall has been installed.The door flange is a perforted as a taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and st/stl screwdriver operated cam latches allow the door panel, which is formed with flanges on four sides, to operate freely with no binding, sagging or distortion. – Installation in: – Designed specifically for installation in drywall walls and ceilings afterthe drywall has been installed Product Features – Formed door panel with flanges on four sides- Unique concealed hinge, door flange is a perforated taping bead with BA-DW-5040 Access Door SpecificationsMaterial: – Material: 20 gauge galvanized formed door panel, flanged on four sides; 26 gauge galvanized frame, with multiple bends for added strength.- Door: Formed door panel, flanged on four sides, Integral perforated taping bead adds extra rigidity- Hinge: Concealed- Standard Latch: Slot screwdriver operated cam latch- Finish: 5 stage iron phosphate preparation with white baked-on polyester powder coat on door panel. Frame to be mill finish.

24″ x 36″ Recessed Access Door for Drywall “no studs required” – Bauco Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. The door panel is supplied with one layer of 5/8″ drywall (or 1/2″). The concealed hinge and removable door panel, along with the easy installation and finishing process, make this access door the best drywall access door in the industry. – Application: – Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance Product Features Product Features – Designed to accomodate 5/8″ drywall, the frame can be reversed to accomodate 1/2″ drywall- Standard with a touch latch feature BA-BP-58 Access Door Specifications: – Door: Aluminum extrusion with 5/8″ drywall inserted into door panel- Door Frame: Recessed aluminum extrusion provides similar edge to drywall bead against which wall or ceiling surface can be finished- Hinge: Unique concealed non corroding two point pin hinge- Standard Latch: Screwdriver operated cam latch- Finish: Mill Finish. Drywall is ready to be finished to match surrounding wall or ceiling surface.

12″ x 12″ Aluminum Frame Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2ADF – Aluminum frame, with drywall insert, for drywall, and various applications The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2DF-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2DF-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

16″ x 16″ Aluminum Frame Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2ADF – Aluminum frame, with drywall insert, for drywall, and various applications The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2DF-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2DF-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

12″ x 12″ Flush Access Door with Drywall Bead Flange Designed specifically for installation in drywall walls and ceilings after drywall has been installed.The door flange is a perforted as a taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and st/stl screwdriver operated cam latches allow the door panel, which is formed with flanges on four sides, to operate freely with no binding, sagging or distortion. – Installation in: – Designed specifically for installation in drywall walls and ceilings afterthe drywall has been installed Product Features – Formed door panel with flanges on four sides- Unique concealed hinge, door flange is a perforated taping bead with BA-DW-5040 Access Door SpecificationsMaterial: – Material: 20 gauge galvanized formed door panel, flanged on four sides; 26 gauge galvanized frame, with multiple bends for added strength.- Door: Formed door panel, flanged on four sides, Integral perforated taping bead adds extra rigidity- Hinge: Concealed- Standard Latch: Slot screwdriver operated cam latch- Finish: 5 stage iron phosphate preparation with white baked-on polyester powder coat on door panel. Frame to be mill finish.

12″ x 12″ Drywall Inlay Access Panel with detachable hatch BA-F2AKL – Aluminum frame, with drywall insert, for ceilings, drywall, and various applications The access panel consists of a welded aluminium frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminium which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring-loaded latch side. This access panel is designed to limit the amount of air dust leaving the room. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2AKL-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2AKL-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

18″ x 18″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2A – Aluminum frame, with drywall insert, for ceilings, drywall, and various applications The access panel consists of a welded frame and is available with or without 1 2″ (12.7.mm)or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminium which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2A-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2A-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

20″ x 20″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2A – Aluminum frame, with drywall insert, for ceilings, drywall, and various applications The access panel consists of a welded frame and is available with or without 1 2″ (12.7.mm)or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminium which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2A-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2A-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

24″ x 24″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2A – Aluminum frame, with drywall insert, for ceilings, drywall, and various applications The access panel consists of a welded frame and is available with or without 1 2″ (12.7.mm)or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminium which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2A-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2A-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

24″ x 36″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2A – Aluminum frame, with drywall insert, for ceilings, drywall, and various applications The access panel consists of a welded frame and is available with or without 1 2″ (12.7.mm)or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminium which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2A-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2A-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).