Best Door Tools Store

18″ x 18″ Drywall Inlay Access Panel for Exterior Facade BA-MPL – Access panel for stucco The access panel consists of aluminum profiles, a sheet steel insert with expanded metal and a round cylinder lock with key. Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process. The access panel is equipped with a safety-system against accidental opening. In order to avoid accidents, this safety-system has to be secured after each opening. A joint gap of 3 mm is visible between outer frame and door leaf, which is equipped with an innovative brush joint (air-tight and dust-proof) and, in addition, with a special joint (water resistant). Access panels for facades in the outer area are applicable for direct mounting onto solid walls (without external wall insulation system) or for installation into a wall insultion system (foam-sealed) from an insulation thickness of 80 mm http: www.bestaccessdoors.com (BA-MPL) Special advantagesEconomical solutionDelivery at short notice on requestEasy and quick installationSolid aluminum frameSophisticated solutionFlush installation in facades Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

20″ x 20″ Drywall Inlay Access Panel for Exterior Facade BA-MPL – Access panel for stucco The access panel consists of aluminum profiles, a sheet steel insert with expanded metal and a round cylinder lock with key. Both, an outer and an inner frame of the access panel consist of four single frames, which are firmly connected due to a special welding process. The access panel is equipped with a safety-system against accidental opening. In order to avoid accidents, this safety-system has to be secured after each opening. A joint gap of 3 mm is visible between outer frame and door leaf, which is equipped with an innovative brush joint (air-tight and dust-proof) and, in addition, with a special joint (water resistant). Access panels for facades in the outer area are applicable for direct mounting onto solid walls (without external wall insulation system) or for installation into a wall insultion system (foam-sealed) from an insulation thickness of 80 mm http: www.bestaccessdoors.com (BA-MPL) Special advantagesEconomical solutionDelivery at short notice on requestEasy and quick installationSolid aluminum frameSophisticated solutionFlush installation in facades Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

16″ x 16″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F3 – Aluminum frame, with drywall inlay, for drywall partitions The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed for tiling applications. http: www.bestaccessdoors.com content BA-F30625.pdf (BA-F3-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F305.pd (BA-F3-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

18″ x 18″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F3 – Aluminum frame, with drywall inlay, for drywall partitions The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed for tiling applications. http: www.bestaccessdoors.com content BA-F30625.pdf (BA-F3-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F305.pd (BA-F3-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

20″ x 20″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F3 – Aluminum frame, with drywall inlay, for drywall partitions The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed for tiling applications. http: www.bestaccessdoors.com content BA-F30625.pdf (BA-F3-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F305.pd (BA-F3-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

24″ x 24″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F3 – Aluminum frame, with drywall inlay, for drywall partitions The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed for tiling applications. http: www.bestaccessdoors.com content BA-F30625.pdf (BA-F3-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F305.pd (BA-F3-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

8″ x 8″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F3 – Aluminum frame, with drywall inlay, for drywall partitions The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed for tiling applications. http: www.bestaccessdoors.com content BA-F30625.pdf (BA-F3-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F305.pd (BA-F3-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

14″ x 14″ Flush Access Door with Drywall Bead Flange Designed specifically for installation in drywall walls and ceilings after drywall has been installed.The door flange is a perforted as a taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and st/stl screwdriver operated cam latches allow the door panel, which is formed with flanges on four sides, to operate freely with no binding, sagging or distortion. – Installation in: – Designed specifically for installation in drywall walls and ceilings afterthe drywall has been installed Product Features – Formed door panel with flanges on four sides- Unique concealed hinge, door flange is a perforated taping bead with BA-DW-5040 Access Door SpecificationsMaterial: – Material: 20 gauge galvanized formed door panel, flanged on four sides; 26 gauge galvanized frame, with multiple bends for added strength.- Door: Formed door panel, flanged on four sides, Integral perforated taping bead adds extra rigidity- Hinge: Concealed- Standard Latch: Slot screwdriver operated cam latch- Finish: 5 stage iron phosphate preparation with white baked-on polyester powder coat on door panel. Frame to be mill finish.

8″ x 8″ Aluminum Frame Drywall Inlay Access Panel with Fully Detachable Hatch BA-F2ADF – Aluminum frame, with drywall insert, for drywall, and various applications The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety-system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. http: www.bestaccessdoors.com content BA-F2A0625.pdf (BA-F2DF-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F2A05.pd (BA-F2DF-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).

12″ x 12″ Drywall Inlay Access Panel with Fully Detachable Hatch BA-F3 – Aluminum frame, with drywall inlay, for drywall partitions The access panel consists of a welded aluminum frame and is available with or without 1 2″ (12.7 mm) or 5 8″ (15.9 mm) inlayed drywall and two latches (comes standard with inlay and touch latches). Both an outer and an inner frame assembly consists of high grade aluminum which is bonded with a special welding process. For sizes 12″ x 12″ (305 mm x 305 mm) and up the access panels are equipped with a safety system to prevent accidental opening. This safety system must be reattached if the hatch is removed. The reveal of 1 16 of an inch (1.59 mm) is visible between the outer frame and door hatch. The concealed snap locks open the access panel when pressure is applied to the spring loaded latch side. This access panel is designed for tiling applications. http: www.bestaccessdoors.com content BA-F30625.pdf (BA-F3-0.5) – 5 8″ http: www.bestaccessdoors.com content BA-F305.pd (BA-F3-0.625) – 1 2″ Special advantagesSuperior engineering innovative designFast deliveryQuick and easy installationSolid aluminum frameFlush installation in ceilings and wallsAvailable in moisture resistant, mildew resistant and cement board Customized solutions Customized sizes can be produced in every dimension upon request. http: www.bestaccessdoors.com custom-size-access-doors (Request a Quote).