Best Door Tools Store

22″ x 22″ Flush Access Door with Drywall Bead Flange Designed specifically for installation in drywall walls and ceilings after drywall has been installed.The door flange is a perforted as a taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and st/stl screwdriver operated cam latches allow the door panel, which is formed with flanges on four sides, to operate freely with no binding, sagging or distortion. – Installation in: – Designed specifically for installation in drywall walls and ceilings afterthe drywall has been installed Product Features – Formed door panel with flanges on four sides- Unique concealed hinge, door flange is a perforated taping bead with BA-DW-5040 Access Door SpecificationsMaterial: – Material: 20 gauge galvanized formed door panel, flanged on four sides; 26 gauge galvanized frame, with multiple bends for added strength.- Door: Formed door panel, flanged on four sides, Integral perforated taping bead adds extra rigidity- Hinge: Concealed- Standard Latch: Slot screwdriver operated cam latch- Finish: 5 stage iron phosphate preparation with white baked-on polyester powder coat on door panel. Frame to be mill finish.

20″ x 20″ Duct Door for Fibreglass DuctsBest Access Doors Duct Access Panels for Fiberglass Ducts are designed to provide convenient, economical access to fiberglass ducts. These doors are for use in low to medium pressure fiberglass ducts. Duct access doors from Best Access Doors for Fiberglass Ducts are available in either hinged -. – Application – Economical access to fibreglass ducts Product Features – These doors are for use in low to medium pressure fibreglass ducts- Hinged door panel BA-HD-5070-F “Hinged” Fibreglass Duct Doors Specifications: – Door: 24 gauge galvanized steel- Frame: 24 gauge galvanized steel- Hinge: Continuous aluminum piano hinge – Insulation: Insulation 1″ Micro-AIRC M/F TYPE-475 R value 7.7 – Gasketing: 1/8″ thick by 1/2″ wide closed cell neoprene gasketing between door and frame and also between frame and duct- Latch: Self tightening, hand operated cam latch.

24″ x 24″ Recessed Access Door with “Behind Drywall” Flange Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. This door is standard with a touch latch feature. Designed to accommodate 5/8″ drywall, the frame can be reversed to accommodate 1/2″ drywall. – Application: – Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance Product Features Product Features – Designed to accomodate 5/8″ drywall, the frame can be reversed to accomodate 1/2″ drywall- Standard with a touch latch feature BA-DW-5058 Access Door Specifications: – Door: .080 aluminum extrusion with 5/8″ drywall inserted into door panel- Door Frame: .080 aluminum extrusion recessed to provide similar edge to drywall bead to allow for finishing of wall or ceiling surface.- Hinge: Spring loaded hinge pin allows door panel to open to 90 degrees, and also allows for door panel to be removed from frame. Safety chain installed on door & frame for safety.- Standard Latch: Concealed Touch Latches- Finish: Mill Finish. Drywall is ready to be finished to match surrounding wall or ceiling surface..

16″ x 16″ Recessed Access Door with “Behind Drywall” Flange Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. This door is standard with a touch latch feature. Designed to accommodate 5/8″ drywall, the frame can be reversed to accommodate 1/2″ drywall. – Application: – Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance Product Features Product Features – Designed to accomodate 5/8″ drywall, the frame can be reversed to accomodate 1/2″ drywall- Standard with a touch latch feature BA-DW-5058 Access Door Specifications: – Door: .080 aluminum extrusion with 5/8″ drywall inserted into door panel- Door Frame: .080 aluminum extrusion recessed to provide similar edge to drywall bead to allow for finishing of wall or ceiling surface.- Hinge: Spring loaded hinge pin allows door panel to open to 90 degrees, and also allows for door panel to be removed from frame. Safety chain installed on door & frame for safety.- Standard Latch: Concealed Touch Latches- Finish: Mill Finish. Drywall is ready to be finished to match surrounding wall or ceiling surface..

18″ x 18″ Recessed Access Door with “Behind Drywall” Flange Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance. This door is standard with a touch latch feature. Designed to accommodate 5/8″ drywall, the frame can be reversed to accommodate 1/2″ drywall. – Application: – Designed to provide access in walls and ceilings, while maintaining an invisible, architecturally pleasing appearance Product Features Product Features – Designed to accomodate 5/8″ drywall, the frame can be reversed to accomodate 1/2″ drywall- Standard with a touch latch feature BA-DW-5058 Access Door Specifications: – Door: .080 aluminum extrusion with 5/8″ drywall inserted into door panel- Door Frame: .080 aluminum extrusion recessed to provide similar edge to drywall bead to allow for finishing of wall or ceiling surface.- Hinge: Spring loaded hinge pin allows door panel to open to 90 degrees, and also allows for door panel to be removed from frame. Safety chain installed on door & frame for safety.- Standard Latch: Concealed Touch Latches- Finish: Mill Finish. Drywall is ready to be finished to match surrounding wall or ceiling surface..

12″ x 12″ Recessed Access Door With Drywall Flange. AHA-GYP is recessed by 5/8″ to accept drywall and the flange, constructed of corner bead, is made to be covered with drywall compound. It is designed to blend in and match the surface finish on which it is installed. It is also available in different recesses (see options) BA-AHA-GYP Recessed Door specifications Material: 16 gauge cold rolled steel Hinge: Continuous piano type hinge Lock / latch: Allen hex head cam latch.

24″ x 36″ General Purpose Access Door with Drywall Flange is engineered for a clean final finish. Once a sufficient layer of drywall compound is applied to the corner bead flange it will leave only the door panel visible. Just like the AHD, the concealed pin hinge and 1/4″ return around the door make it the right choice for a great look and a long lasting usage.BA-AHD-GYP General Purpose Drywall Access Panel. Material: 16 gauge cold rolled steel Hinge: Hidden pin hinge. (Continuous piano type on doors over 24″ in height or width) Lock / latch: Screwdriver operated cam latch Finish: DuPont high quality white powder coat.

8″ x 8″ General Purpose Access Door with Drywall Flange is engineered for a clean final finish. Once a sufficient layer of drywall compound is applied to the corner bead flange it will leave only the door panel visible. Just like the AHD, the concealed pin hinge and 1/4″ return around the door make it the right choice for a great look and a long lasting usage.BA-AHD-GYP General Purpose Drywall Access Panel. Material: 16 gauge cold rolled steel Hinge: Hidden pin hinge. (Continuous piano type on doors over 24″ in height or width) Lock / latch: Screwdriver operated cam latch Finish: DuPont high quality white powder coat.

12″ x 12″ General Purpose Access Door with Drywall Flange is engineered for a clean final finish. Once a sufficient layer of drywall compound is applied to the corner bead flange it will leave only the door panel visible. Just like the AHD, the concealed pin hinge and 1/4″ return around the door make it the right choice for a great look and a long lasting usage.BA-AHD-GYP General Purpose Drywall Access Panel. Material: 16 gauge cold rolled steel Hinge: Hidden pin hinge. (Continuous piano type on doors over 24″ in height or width) Lock / latch: Screwdriver operated cam latch Finish: DuPont high quality white powder coat.

14″ x 14″ General Purpose Access Door with Drywall Flange is engineered for a clean final finish. Once a sufficient layer of drywall compound is applied to the corner bead flange it will leave only the door panel visible. Just like the AHD, the concealed pin hinge and 1/4″ return around the door make it the right choice for a great look and a long lasting usage.BA-AHD-GYP General Purpose Drywall Access Panel. Material: 16 gauge cold rolled steel Hinge: Hidden pin hinge. (Continuous piano type on doors over 24″ in height or width) Lock / latch: Screwdriver operated cam latch Finish: DuPont high quality white powder coat.