Category: Target by Husqvarna Core Drills & Bits

8231 Cardi D3-250EL 20 Amp Motor by Husqvarna

8231 Cardi D3-250EL 20 Amp Motor
Check Price for 8231 Cardi D3-250EL 20 Amp Motor

Cardi D3-250EL 20 Amp Motor

  • 2-speed gearbox
  • Professional core drill motor for the demanding user
  • 20 Amp, 115 Volt, 60 Hz, Single phase
  • On/off switch built-in, no control panel needed
  • Cardi constant safety slip clutch
  • 1-1/4″ shaft, straight blade plug
  • Weighs 30 lbs.

Recommended Core Bit Diameters

  • Low speed 420 idle Rpm 300 load Rpm bits 6″ to 10″
  • High speed 860 idle Rpm 620 load Rpm bits 2″ to 6″

.

Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

7740 Husqvarna DS50 Gyro Telescope Drill Stand by Husqvarna

7740 Husqvarna DS50 Gyro Telescope Drill Stand
Check Price for 7740 Husqvarna DS50 Gyro Telescope Drill Stand

Husqvarna DS 50 Gyro
Telescopic stand system that works with most drills. The modular system and the stands flexibility allow both straight and angled drilling in walls, floors and ceilings

  • Free shipping in the continental US
  • Telescope stand system that works with most drills.
  • Supplied complete with stand and drill column, rubberized support plate carriage and base plate with wheels.
  • Drills up to 14″ in diameter and a drill travel of 24″ maximum.
  • The handle is balanced so the carriage and drill can be carried easily
    • Technical Specification DS 50 Gyro
    Ceiling support extended 125″ (3.175mm)
    Ceiling support retracted 76″ (1.931mm)
    Column length 57″ (1.448mm)
    Weight 141 lbs (64kg)
    Max drill capacity 14″ (356mm)
    Shipping UPS/Fedex

.

Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

7739 Husqvarna DM230 Hand Held Core Drill by Husqvarna

7739 Husqvarna DM230 Hand Held Core Drill
Check Price for 7739 Husqvarna DM230 Hand Held Core Drill

Husqvarna DM230 Hand Held Core Drill

The Husqvarna DM230 is a new handheld drill motor with functional ergonomics. A padded end cap provides increased comfort for the operator. The machine is modular & therefore easy to maintain & serve.

  • Free Carrying case.
  • Water-cooled gearbox where the water passes through the blade spindle, extends life of the gearbox & gaskets.
  • Easy mount to DS 160C core drill stand.
  • Controls ergonomically designed & easy to reach.
  • Water hose & electric cable run parallel from the machine.
  • Softstart electric current limiter ensures a softer start & less load on the electrical current.
  • Elgard electric overload protection, protects the motor from excessive wear and tear.
    • Model DM 230
    Motor Output 1,725W, 15Amps
    Voltage 115V
    Spindle Speed (High) 2,900 Rpm
    Spindle Speed (Medium) 1,400 Rpm
    Spindle Speed (Low) 580 Rpm
    Suggested Dia.(High) 1.5″ and below
    Suggested Dia.(Medium) 2″-4″
    Suggested Dia.(Low) 4″-6″

.

Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

6815 Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump by

6815 Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump
Check Price for 6815 Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump

Husqvarna DS 700 Core Drill Combo base W/ Vacuum Pump

  • Free shipping from Factory warehouse
    • Weighs 105 lbs (57 kg)
    • Combo Base, vacuum pump not included.
    • Combo base w/ vacuum assy. see item no.6815.
    • 1″ to 10″ bit capacity standard. up to 14″ with two spacers
    • 42″ long, 2-1/2″ square column, reduces flex
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Slide handle permits drilling in tight areas
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Sliding feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Vacuum Features

    • Heavy-Duty, pliable rubber gasket
    • Quiet, 4 Amp diaphragm pump
    • Mount bracket holds vacuum pump to machine base
    • Water trap shut-off protects motor
    • Vacuum gauge and release petcock valve

    Motors

    • Milwaukee 4090 – 15A 375/750 Rpm, 5″ to 8″ recommended bit size
    • Milwaukee 4004 – 20A Slip Clutch, 4500/900 Rpm, 6″ to 10″ recommended bit size
    • Milwaukee 4004 – 20A Slip Clutch, 300/600 Rpm, 9″ to 14″ recommended bit size

    Combo Base Size

    • 5″ (127mm) wheels; 6″ x 11″ (152mm x 279mm) cast alumium; 4 levelling screws, slot for anchor system.

    Column Size

    • 2-1/2″ (64mm) square, 42″ (1,067mm) long, gear rack welded to column.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    6820 Husqvarna DS 700 Core Drill Combo Base by

    6820 Husqvarna DS 700 Core Drill Combo Base
    Check Price for 6820 Husqvarna DS 700 Core Drill Combo Base

    Husqvarna DS 700 Core Drill Features

  • Free shipping from Factory warehouse
    • Weighs 105 lbs (57 kg)
    • Combo Base, vacuum pump not included.
    • Combo base w/ vacuum assy. see item no.6815.
    • 1″ to 10″ bit capacity standard. up to 14″ with two spacers
    • 42″ long, 2-1/2″ square column, reduces flex
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Slide handle permits drilling in tight areas
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Sliding feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Motors

    • Milwaukee 4090 – 15A 375/750 Rpm, 5″ to 8″ bit size
    • Milwaukee 4096 – 20A Clutch, 4500/900 Rpm, 6″ to 10″ bit size
    • Milwaukee 4004 – 20A Clutch, 300/600 Rpm, 9″ to 14″ bit size

    Combo Base Size

    • 5″ (127mm) wheels; 6″ x 11″ (152mm x 279mm) cast aluminum; 4 leveling screws, slot for anchor system.

    Column Size

    • 2-1/2″ (64mm) square, 42″ (1,067mm) long, gear rack welded to column.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    6810 Husqvarna DS 800 Core Drill W/ Anchor Base by

    6810 Husqvarna DS 800 Core Drill W/ Anchor Base
    Check Price for 6810 Husqvarna DS 800 Core Drill W/ Anchor Base

    Husqvarna DS 800 Core Drill Features

  • Free shipping from factory warehouse
    • Weighs 110 lbs
    • Drill holes up to 16″ (extra spacer required)
    • 1″ to 14″ bit capacity standard
    • 42″ long, precision ground and plated 2-7/8″ square column reduces flex for more accurate drilling
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Gear track is welded to the column
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Four-spoke feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Motors

    • Cardi D3-250S – 20A, 420/860 RPM
    • Milwaukee 4004 – 20A Slip Clutch, 300/600 RPM

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    6805 Husqvarna DS 800 Core Drill W/ Combo Vacuum Base by

    6805 Husqvarna DS 800 Core Drill W/ Combo Vacuum Base
    Check Price for 6805 Husqvarna DS 800 Core Drill W/ Combo Vacuum Base

    Husqvarna DS 800 Core Drill, Combo Vacuum Base

  • Free shipping from Factory warehouse
    • Weighs 110 lbs
    • Drill holes up to 16″ (extra spacer required)
    • 1″ to 14″ bit capacity standard
    • 42″ long, precision ground and plated 2-7/8″ square column reduces flex for more accurate drilling
    • Reinforced base for added rigidity
    • Standard control panel includes on/off switch, ammeter and one receptacle for the motor. (Not needed when using Carding motors)
    • Jack screw is standard and provides stability for ceiling bracing
    • Precision rack and pinion gear system
    • Gear track is welded to the column
    • Adjustable and replaceable bronze shims inside carriage provide less flex, promote precise head alignment and smooth in-feed travel
    • Four-spoke feed handle is easy to use and operates smoothly
    • 2-year Gold Medal Warranty on stand

    Vacuum Features

    • Heavy-Duty, pliable rubber gasket
    • Quiet, 4 Amp diaphragm pump
    • Mount bracket holds vacuum pump to machine base
    • Water trap shut-off protects motor
    • Vacuum gauge and release petcock valve

    Motors

    • Milwaukee 4096 – 20A Clutch, 4500/900 Rpm, Recommended bit siz 6″ to 10″
    • Milwaukee 4004 – 20A Clutch, 300/600 Rpm, Recommended bit size 9″ to 14″

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    6802 Husqvarna Banner Line Core Bits by

    6802 Husqvarna Banner Line Core Bits
    Check Price for 6802 Husqvarna Banner Line Core Bits

    Husqvarna Banner Line Bits

    General Purpose, Concrete and Masonry.

    • For general purpose wet drilling of concrete, masonry and brick, including concrete with soft to hard aggregate and light to medium steel reinforcing.
    • Also effective on granite, marble and stone.
    • 14″ drilling depth
    • Total segment height: .300″ (.200″ diamond depth; .100″ segment base)
    • 3/4″, 1″, 1-1/2″ have 5/8″-11 arbor.
    • All other sizes have 1-1/4″-7 arbor.

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits

    9148 Husqvarna DR 150 Core Drill Rig by Husqvarna

    9148 Husqvarna DR 150 Core Drill Rig
    Check Price for 9148 Husqvarna DR 150 Core Drill Rig

    Husqvarna DR150 Core Drill

    DR 150 Advantages.

    • Lightweight core drill rig for the rental shop or professional who requires high performance in a compact machine.
    • 1,725 watts/15 Amp motor with a 800 Rpm single-speed gearbox and electric overload protection.
    • Bit not included.
    • Mechanical clutch reduces risk of motor damage.
    • 19″ drilling stroke.
    • Handle for portability.
    • Lightweight and ergonomic pistol grip design.
    • 2″ x 2″ column.
    • Standard 1-1/4″-7 thread with 5/8″-11 threaded adapter and water connection.
    • Equally suited for wet or dry drilling.

    Motor

    • Voltage 110V
    • Full Load Amps: 15 amp
    • Max. Motor RPM: 800
    • 6″ maximum bit capacity.

    Dimensions

    • Length: 15″ / 381mm
    • Width: 6-1/2″ / 876mm
    • Height: 34-1/2″ / 165mm
    • Weight: 40 lbs / 18 kg

    .

    Posted in Shop by Brand, Target & Partner by Husqvarna, Target by Husqvarna Core Drills & Bits
    1. Pages:
    3. 1
    4. 2
    5. 3
    6. 4
     Recent Entries »