Category: Target by Husqvarna Core Drills & Bits
8248 Husqvarna Collector Ring Pump by Husqvarna
8237 DM 406 HL 6-Speed Hydraulic Drill Motor by Husqvarna
DM 406 HL 6-Speed Hydraulic Drill Motor
- 120-1,400 Rpm.
- Max pressure 140 Bar
- Max flow 10-1/2 Gls/min. (40 liter/min.)
- 1-1/4″ – 7 spindle thread.
- Recommended bit diameter from 1″ to 24″.
- Weight 35 lbs (16 kg).
Recommended motor speed
- Low speed 340/230/120 Rpm bits 5″ to 24″
- High speed 1,400/980/580 Rpm bits 1″ to 5″
- Recommended for DS 800 drill stand.
- Adapter plate needed (item 541400325) for 24″ diameter drilling.
.
8238 Husqvarna DS 800 Stand Less Motors by
DS 800 stand less motors
The heavy-duty DS 800 drill system stand is the contractor’s choice for the more demanding drilling applications. The precision ground column provides strength and rigidity for high horsepower drill motors. The carriage and base are made of high-strength aluminum designed to withstand excessive wear and to ease job site handling.
- Motor not included
- Drill holes up to 16″ (extra spacer required).
- 1″ to 14″ bit capacity standard. Spacers available for larger bit sizes.
- 42″ long, precision ground and plated 2-7/8″ square column reduces flex for more accurate drilling.
- Reinforced base for added rigidity.
- Standard control panel includes on/off switch, ammeter and one receptacle for the motor
- Jack screw is standard and provides stability for ceiling bracing.
- Precision rack and pinion gear system for smoother operation.
- Adjustable and replaceable brass shims inside carriage provide less flex, promote precise head alignment and smooth feed travel.
- New roller carriage option.
.
8239 Husqvarna DS 700 Less Motors by
Husqvarna DS 700 Less Motors
The DS 700 core drilling rig stand is the perfect answer for most medium sized drilling jobs. The rig features an aluminum slide carriage and base to create a strong, lightweight drill stand.
- Motor not included
- 1″ to 10″ bit capacity standard. Up to 14″ with one spacer.
- 42″ long, 2-1/2″ square column reduces flex.
- Reinforced base for added rigidity.
- Standard control panel includes on/off switch, ammeter and two receptacle outlets for the motor and vacuum pump (not needed when using Cardi motors).
- Jack screw is standard and provides stability for ceiling bracing.
- Precision rack and pinion gear system for smoother operations.
- Slide handle permits drilling in tight areas.
- Adjustable and replaceable brass shims inside carriage provide less flex and promote precise head alignment and smooth in-feed travel.
- Carriage is one-piece and is precision-machined for a more precise fit on the column.
.
8240 Husqvarna Spacer Blocks by
8232 Cardi D3-300EL 20 Amp Motor by Husqvarna
Cardi D3-300EL 20 Amp Motor
- 2-speed gearbox
- Professional core drill motor for the demanding user
- Ideal for larger diameters or hard aggregate areas
- 20 Amp, 115 Volt, 60 Hz, single phase
- Weighs 30 lbs.
Recommended Core Bit Diameters
- Low speed 300 idle Rpm, 210 load Rpm bits 8″ to 14″
- High speed 620 idle Rpm, 450 load Rpm bits 3″ to 8″
.
8233 Milwaukee 4090 15 Amp Motor by Husqvarna
Milwaukee 4090 15 Amp Motor
- 115 Volt, 1 5Amps, 375-750 Rpm
- Built-in water swivel
- 1-1/4″ – 7 spindle thread
- Recommended bit diameters from 2-1/2″ to 8″
- Weighs 40 lbs.
Recommended bit diameters speed
.
8234 Milwaukee 4004 20 Amp Motor by Husqvarna
Milwaukee 4004 20 Amp Motor
- 115 Volt, 300-600 Rpm
- Built-in water swivel
- 1-1/4″-7 spindle thread
- Recommended bit diameters from 5″ to 14″
- Weighs 40 lbs.
Recommended bit diameters speed
- Low speed 300 idle Rpm bits 9″ to 14″
- High speed 600 idle Rpm bits 5″ to 8″
.
8235 Milwaukee 4096 20 Amp Motor with Clutch by Husqvarna
Milwaukee 4096 20 Amp Motor with Clutch
- 115 volt, 450-900 Rpm
- 1-1/4″ – 7 spindle thread
- Friction clutch
- Recommended bit diameter from 2″ to 10″
- Weighs 40 lbs.
Recommended bit diameters speed
- Low 450 Rpm bits 6″ to 10″
- High 900 Rpm bits 2″ to 6″
.