Tag Archives: Wacker Corporation

9344 Wacker RD 12A-90 Hydrostatic Vibratory Roller by Wacker Corporation

9344 Wacker RD 12A-90 Hydrostatic Vibratory Roller
Check Price for 9344 Wacker RD 12A-90 Hydrostatic Vibratory Roller

Wacker RD 12A-90 Hydrostatic Vibratory Roller

    High performance rollers offer excellent compaction results

    WACKER’s RD 12 one ton roller series features dual drum drive and articulated steering for extremely accurate control. Front drum vibration with static rear drum leaves a quality asphalt finish. Outstanding overall roller performance and a high exciter frequency allows compaction at faster speeds while still delivering even coverage and excellent results.

Features

  • Pressurized water system offers consistent water flow. An eight-position timer allows operator to adjust water flow and match conditions.
  • Overall machine design eliminates overhang of unit. Easily manueverable units provide flush, right up to the edge asphalt compaction.
  • Rear platform and front hood tilt up for easy access and improved machine serviceability.
  • Rollers offer reduced sound levels; units run quieter than competitive machines in same class.
  • Ideally suited for compaction of level sublayers and finish layers on road repairs, driveways, parking lots and and any asphalt surface.

Technical Data RD 12A-90 Hydrostatic Vibratory Roller

Description Metric Inch
Dry Weight 1.002 kg 2,171 lb
Operating weight (includes 175 lb. operator, half-full water tank and half-full fuel tank) 1.130 kg 2,490 lb
Weight w/ballast in rear drum 1.220 kg 2,690 lb
Drum diameter 560 mm 22 in
Drum width 900 mm 35.4 in
Overall size l x w x h 1.825 x 1.035 x 2.300 mm 71.8 x 40.8 x 90.6 in
Curb clearance (R/L) 400/210 mm 15.7/8.2 in
Side clearance (R/L) 48/90 mm 1.9/3.5 in
Water tank capacity 100 l 26.4 US gal
Engine Type air-cooled, 4-cycle 2-cylinder, Honda gasoline
Starting system Electric Electric
Displacement 614 cm3 37.5 in3
Max. power output 13,4 kW 18 hp
at 3.600 1/min 3,600 rpm
Operating power 11,9 kW 15.8 hp
at 3.100 1/min 3.100 rpm
Maximum operating power 13,4 kW (PS) 18 hp (kW)
Fuel consumption 4,9 l/h 1.3 US gal/h
Electrical system 12 V 12 V
Number of vibrating drums 1
Dynamic (centrifugal) force per drum 15 kN 3,400 lb
Frequency 70 Hz 4,200 vpm
Fuel tank capacity 23 l 6.1 US gal
Dynamic linear force, front 16,8 N/mm 96 lb/in
Forward/reverse speed (Infinitely variable) 0-8,7 km/h 0-5.4 mph
Forward/reverse speed (Infinitely variable) 0-145 m/min 0-475 ft/min
Maximum gradeability up to 15 ° up to 15 °
Maximum gradeability 30 % 30 %
Outside turning radius 2,45 m 8.04 ft
Max. area capacity 7.800 m2/h 84,100 ft2/h

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Trench Rollers & Duplex Rollers

9345 Wacker RD 16-90 Hydrostatic Vibratory Roller by Wacker Corporation

9345 Wacker RD 16-90 Hydrostatic Vibratory Roller
Check Price for 9345 Wacker RD 16-90 Hydrostatic Vibratory Roller

Wacker RD 16-90 Hydrostatic Vibratory Roller

    High performance rollers offer excellent compaction results

    WACKER’s RD 16 roller features dual drum drive for maximum traction and articulated steering for extremely accurate control. Diesel-powered unit offers dual drum vibration for a high quality asphalt finish. Outstanding overall roller performance and a high exciter frequency allows compaction at faster speeds while still delivering even coverage and excellent results.

Features

  • Pressurized water system offers consistent water flow. An eight-position timer allows operator to adjust water flow and match conditions.
  • Overall machine design eliminates overhang of unit. Easily maneuverable units provide flush, right up to the edge asphalt compaction.
  • Rear platform and front hood tilt up for easy access and improved machine serviceability.
  • The RD 16 features a reliable Lombardini diesel engine for high performance and standard foldable ROPS for easy transport and storage.
  • Ergonomically designed operator’s platform features a fully adjustable suspension seat for maximum comfort and the sloped hood provides for excellent visibility.
  • Designed for compacting base and finish layers of asphalt as well as granular subbase material in confined areas. Ideal for parking lots, driveways and shoulder work.

Technical Data RD 16-90 Hydrostatic Vibratory Roller

    Description Metric Inch
    Dry Weight 1.356 kg 2,990 lb
    Operating weight (includes 175 lb. operator, half-full water tank and half-full fuel tank) 1.485 kg 3,274 lb
    Drum diameter 560 mm 22 in
    Drum width 900 mm 35.4 in
    Overall size l x w x h 1.950 x 1.000 x 2.545 mm 76.8 x 39.4 x 100.3 in
    Curb clearance (R/L) 400 mm 15.7 in
    Side clearance (R/L) 45/45 mm 1.9/1.9 in
    Water tank capacity 100 l 26.4 US gal
    Engine Type liquid-cooled, 4-stroke, Lombardini diesel, LDW 1003
    Displacement 1.028 cm3 62.7 in3
    Max. power output 20 kW 26.8 hp
    at 3.600 1/min 3,600 rpm
    Rated power output 16,5 kW 24.5 hp
    at 3.000 1/min 3,000 rpm
    Fuel consumption 3,6 l/h 1.0 US gal/h
    Fuel tank capacity 23 l 6.1 US gal
    Electrical system 12 V 12 V
    Number of vibrating drums 2
    Dynamic (centrifugal) force per drum 15 kN 3,400 lb
    Frequency 70 Hz 4,200 Hz
    Dynamic linear force per drum (max.) 16,7 N/mm 96 lb/in
    Compaction depth asphalt 10 cm 4 in
    Forward/reverse speed (Infinitely variable) 0-9,3 km/h 0-5.8 mph
    Forward/reverse speed (Infinitely variable)_ 0-155 m/min 0-510 ft/min
    Maximum gradeability 30 % 30 %
    Outside turning radius 2,92 m 9.5 ft
    Max. area capacity 8.386 m2/h 90,270 ft2/h

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Trench Rollers & Duplex Rollers

9330 Wacker VP 1135A Single Direction Vibratory Soil Plate by Wacker Corporation

9330 Wacker VP 1135A Single Direction Vibratory Soil Plate
Check Price for 9330 Wacker VP 1135A Single Direction Vibratory Soil Plate

Wacker VP 1135A Vibratory Soil Plate

  • Designed for compaction in confined areas of granular soil in narrow trenches.
  • Ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction.

Features

  • Special contoured running surfaces and rounded edges provide maximum performance and maneuverability.
  • Completely enclosed belt protected by a lightweight belt-guard for reduced wear and minimal service.
  • Newly designed “low-vibration” guide handle greatly improves operator comfort and minimizes operator fatigue.
  • Heavy-duty shock mounts on engine console dampen vibrations thereby reducing wear on the components.
  • Exciter bearing design requires minimal maintenance for improved productivity.
  • Single direction plate compactor gas powered

  • Ergonomically designed lifting handles offer easier loading and unloading for operator during transport.
  • Improved water tank design with larger capacity and filler hole provide higher productivity.

    • Description Metric Inch
    Length x width x height 955 x 350 x 880 mm 37.5 x 14 x 35 in
    Lowest working height 640 mm 25 in
    Size of base plate (L x W) 520 x 350 mm 20,5 x 14 in
    Operating weight 62 kg 137 lb
    Compacted area (soil) 550 m2/h 5,900 ft2/h
    Forward speed (soil) 25 m/min 85 ft/min
    Gradeability up to 30 % up to 30 %
    Vibration frequency 97 Hz 5,800 vpm
    Max. centrifugal force 11 kN 2,470 lb
    Engine Type air-cooled, 4 cycle single cylinder, gasoline engine
    Type Honda
    Displacement 118 cm3 7.2 in3
    Max. power output 3 kW 4 hp
    at 3.600 1/min 3,600 rpm
    Rated power output 3 kW 4 hp
    at 3.600 1/min 3,600 rpm
    Fuel tank capacity 2,5 l 2.6 US qt
    Fuel consumption 0,8 l/h 0.9 US qt/h
    Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto baseplate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9331 Wacker VP 1340A Single Direction Vibratory Soil Plate by Wacker Corporation

9331 Wacker VP 1340A Single Direction Vibratory Soil Plate
Check Price for 9331 Wacker VP 1340A Single Direction Vibratory Soil Plate

Wacker VP 1340A Vibratory Soil Plate

  • Designed for compaction in confined areas of granular soil in narrow trenches.
  • Ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction.

Features

  • Special contoured running surfaces and rounded edges provide maximum performance and maneuverability.
  • Completely enclosed belt protected by a lightweight belt guard for reduced wear and minimal service.
  • Newly designed “low-vibration” guide handle greatly improves operator comfort and minimizes operator fatigue.
  • Heavy-duty shock mounts on engine console dampen vibrations thereby reducing wear on the components.
  • Exciter bearing design requires minimal maintenance for improved productivity.
  • Single direction plate compactor gas powered

  • Ergonomically designed lifting handles offer easier loading and unloading for operator during transport.
  • Improved water tank design with larger capacity and filler hole provide higher productivity.

Description Metric Inch
Length x width x height 1.020 x 400 x 885 mm 40 x 1.5 x 35 in
Lowest working height 680 mm 26.5 in
Size of base plate (L x W) 590 x 400 mm 23 x 15,5 in
Operating weight 74 kg 163 lb
Compacted area (soil) up to 550 m2/h up to 5,900 ft2/h
Forward speed (soil) up to 23 m/min up to 75 ft/min
Gradeability up to 30 % up to 30 %
Vibration frequency 97 Hz 5,800 vpm
Max. centrifugal force 13 kN 2,925 lb
Engine Type air-cooled, 4 cycle single cylinder, gasoline engine Honda
Type Honda
Displacement 163 cm3 9.9 in3
Max. power 4,1 kW 5.5 hp
at 3.900 1/min 3,900 rpm
Rated power output 3,7 kW 5 hp
at 3.600 1/min 3,600 rpm
Fuel tank capacity 3,7 l 3.9 US qt
Fuel consumption 1,8 l/h 1.9 US qt/h
Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto baseplate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9332 Wacker VP 1550A Single Direction Vibratory Soil Plate by Wacker Corporation

9332 Wacker VP 1550A Single Direction Vibratory Soil Plate
Check Price for 9332 Wacker VP 1550A Single Direction Vibratory Soil Plate

Wacker VP 1550A Vibratory Soil Plate

  • Designed for compaction in confined areas of granular soil in narrow trenches.
  • Ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction.

Features

  • Special contoured running surfaces and rounded edges provide maximum performance and maneuverability.
  • Completely enclosed belt protected by a lightweight belt guard for reduced wear and minimal service.
  • Newly designed “low-vibration” guide handle greatly improves operator comfort and minimizes operator fatigue.
  • Heavy-duty shock mounts on engine console dampen vibrations thereby reducing wear on the components.
  • Exciter bearing design requires minimal maintenance for improved productivity.
  • Single direction plate compactor gas powered

  • Ergonomically designed lifting handles offer easier loading and unloading for operator during transport.

    • Description Metric Inch
    Length x width x height (handle in working position) 1.020 x 500 x 885 mm 40 x 19.5 x 35 in
    Lowest working height 680 mm 26.5 in
    Size of base plate (L x W) 590 x 500 mm 23 x 19.5 in
    Operating weight 83 kg 184 lb
    Compacted area (soil) up to 615 m2/h up to 6,600 ft2/h
    Forward speed (soil) up to 20 m/min up to 67 ft/min
    Gradeability up to 30 % up to 30 %
    Vibration frequency 97 Hz 5,800 vpm
    Max. centrifugal force 15 kN 3,375 lb
    Engine Type air-cooled, 4 cycle single cylinder, gasoline engine
    Type Honda
    Displacement 163 cm3 9.9 in3
    Max. power output 4,1 kW 5.5 hp
    at 3.900 1/min 3,900 rpm
    Rated power output 3,7 kW 5.0 hp
    at 3.600 1/min 3,600 rpm
    Fuel tank capacity 3,7 l 3.9 US qt
    Fuel consumption 1,8 l/h 2.1 US qt/h
    Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto baseplate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9333 Wacker VP 2050A Single Direction Vibratory Soil Plate by Wacker Corporation

9333 Wacker VP 2050A Single Direction Vibratory Soil Plate
Check Price for 9333 Wacker VP 2050A Single Direction Vibratory Soil Plate

Wacker VP 2050A Vibratory Soil Plate

  • Designed for compaction in confined areas of granular soil in narrow trenches.
  • Ideal for curbs, gutters, around tanks, forms, columns, footings, guard railings, drainage ditches, gas and sewer works and building construction.

Features

  • Special contoured running surfaces and rounded edges provide maximum performance and maneuverability.
  • Completely enclosed belt protected by a lightweight belt guard for reduced wear and minimal service.
  • Newly designed “low-vibration” guide handle greatly improves operator comfort and minimizes operator fatigue.
  • Heavy-duty shock mounts on engine console dampen vibrations thereby reducing wear on the components.
  • Exciter bearing design requires minimal maintenance for improved productivity.
  • Single direction plate compactor gas powered

  • Ergonomically designed lifting handles offer easier loading and unloading for operator during transport.
  • Improved water tank design with larger capacity and filler hole provide higher productivity.

Description Metric Inch
Length x width x height (handle in working position) 1.020 x 500 x 885 mm 40 x 19.5 x 35 in
Lowest working height 680 mm 26.5 in
Size of base plate (L x W) 590 x 500 mm 23 x 19.5 in
Operating weight 83 kg 184 lb
Compacted area (soil) up to 615 m2/h up to 6,600 ft2/h
Forward speed (soil) up to 20 m/min up to 67 ft/min
Gradeability up to 30 % up to 30 %
Vibration frequency 97 Hz 5,800 vpm
Max. centrifugal force 15 kN 3,375 lb
Engine Type air-cooled, 4 cycle single cylinder, gasoline engine
Type Honda
Displacement 163 cm3 9.9 in3
Max. power output 4,1 kW 5.5 hp
at 3.900 1/min 3,900 rpm
Rated power output 3,7 kW 5.0 hp
at 3.600 1/min 3,600 rpm
Fuel tank capacity 3,7 l 3.9 US qt
Fuel consumption 1,8 l/h 2.1 US qt/h
Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto baseplate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9334 Wacker WP 1540A Single Direction Vibratory Soil Plate by Wacker Corporation

9334 Wacker WP 1540A Single Direction Vibratory Soil Plate
Check Price for 9334 Wacker WP 1540A Single Direction Vibratory Soil Plate

Wacker WP 1540A Vibratory Soil Plate

  • Premium plates features a tough, wear resistant, ductile iron base plate offering high strength and shock resistance.
  • Patented computer designed base plate has a tapered bottom and edges for high speed and excellent maneuverability.
  • Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction next to structures, curbs and abutments.

Features

  • Lightweight, high strength aluminum components including the engine console and belt guard have been combined for reduced weight and easy machine handling.
  • Straight, center-mounted guide handle offers superior maneuverability and can be lowered within inches of the surface to operate plate under obstacles and form work.
  • High inertia clutch with adjustable shims ensures smoother operation, longer belt life, and simplified belt adjustment.
  • Many lifting points and front lift cage offer easier loading and unloading for operator convenience.

Description Metric Inch
Length x width x height (handle in working position) 875 x 400 x 965 mm 34.5 x 15.5 x 38 in
Lowest working height 510 mm 20 in
Size of base plate (L x W) 585 x 400 mm 23 x 15.5 in
Operating weight 86 kg 190 lb
Compacted area 612 m2/h 6,590 ft2/h
Forward speed up to 30 m/min up to 100 ft/min
Gradeability 30 % 30 %
Vibration frequency 100 Hz 6,000 vpm
Max. centrifugal force 15 kN 3,375 lb
Engine Type Wacker air-cooled, 4 cycle, single cylinder, gasoline engine
Displacement 169 cm3 10.3 in3
Max. power output 4,5 kW 6 hp
Operating speed 3.900 1/min 3,900 rpm
Fuel tank capacity 3,6 l 3.8 US qt
Fuel consumption 1,5 l/h 1.6 US qt/h
Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto base plate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9335 Wacker WP 1550A Single Direction Vibratory Soil Plate by Wacker Corporation

9335 Wacker WP 1550A Single Direction Vibratory Soil Plate
Check Price for 9335 Wacker WP 1550A Single Direction Vibratory Soil Plate

Wacker WP 1550A Vibratory Soil Plate

  • Premium plates features a tough, wear resistant, ductile iron base plate offering high strength and shock resistance.
  • Patented computer designed base plate has a tapered bottom and edges for high speed and excellent maneuverability.
  • Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction next to structures, curbs and abutments.

Features

  • Lightweight, high strength aluminum components including the engine console and beltguard have been combined for reduced weight and easy machine handling.
  • Straight, center-mounted guide handle offers superior maneuverability and can be lowered within inches of the surface to operate plate under obstacles and form work.
  • High inertia clutch with adjustable shims ensures smoother operation, longer belt life, and simplified belt adjustment.
  • Many lifting points and front lift cage offer easier loading and unloading for operator convenience.

Technical Data WP 1550A

Description Metric Inch
Length x width x height (handle in working position) 875 x 500 x 965 mm 34.5 x 19.5 x 38 in
Lowest working height 510 mm 20 in
Size of base plate (L x W) 585 x 500 mm 23 x 19.5 in
Operating weight 88 kg 194 lb
Water tank capacity 10,5 l 11 US qt
Compacted area 905 m2/h 9,750 ft2/h
Forward speed up to 30 m/min up to 100 ft/min
Gradeability 30 % 30 %
Vibration frequency 100 Hz 6,000 vpm
Max. centrifugal force 15 kN 3,375 lb
Engine Type air-cooled, 4 cycle single cylinder, gasoline engine Honda
Displacement 163 cm3 9.9 in3
Max. power output 4,1 kW 5.5 hp
at 3.600 1/min 3,600 rpm
Rated power output 3,7 kW 5.0 hp
at 3.600 1/min 3,600 rpm
Fuel tank capacity 3,7 l 3.9 US qt
Fuel consumption 1,8 l/h 1.9 US qt/h
Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto baseplate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9336 Wacker WP 1550W Single Direction Vibratory Asphalt Plate by Wacker Corporation

9336 Wacker WP 1550W Single Direction Vibratory Asphalt Plate
Check Price for 9336 Wacker WP 1550W Single Direction Vibratory Asphalt Plate

Wacker WP 1550W Vibratory Asphalt Plate

  • Water tank included.
  • Premium plates features a tough, wear resistant, ductile iron base plate offering high strength and shock resistance.
  • Patented computer designed base plate has a tapered bottom and edges for high speed and excellent maneuverability.
  • Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction next to structures, curbs and abutments.

Features

  • Lightweight, high strength aluminum components including the engine console and belt guard have been combined for reduced weight and easy machine handling.
  • Straight, center-mounted guide handle offers superior maneuverability and can be lowered within inches of the surface to operate plate under obstacles and form work.
  • High inertia clutch with adjustable shims ensures smoother operation, longer belt life, and simplified belt adjustment.
  • Many lifting points and front lift cage offer easier loading and unloading for operator convenience.

Technical Data WP 1550W

Description Metric Inch
Length x width x height (handle in working position) 875 x 400 x 965 mm 34.5 x 15.5 x 38 in
Lowest working height 510 mm 20 in
Size of base plate (L x W) 585 x 400 mm 23 x 15.5 in
Operating weight 86 kg 190 lb
Water tank capacity 10.5 l 11 US qt
Compacted area 612 m2/h 6,590 ft2/h
Forward speed up to 30 m/min up to 100 ft/min
Gradeability 30 % 30 %
Vibration frequency 100 Hz 6,000 vpm
Max. centrifugal force 15 kN 3,375 lb
Engine Type air-cooled, 4 cycle single cylinder, gasoline engine Honda
Displacement 163 cm3 9.9 in3
Max. power output 4,1 kW 5.5 hp
at 3.600 1/min 3,600 rpm
Rated power output 3.7 kW 5.0 hp
at 3.600 1/min 3,600 rpm
Fuel tank capacity 3.7 l 3.9 US qt
Fuel consumption 1.8 l/h 1.9 US qt/h
Power Train Power transmission from engine via centrifugal clutch and V-belt onto exciter which transmits centrifugal force onto base plate.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9337 Wacker BPU 2540A Reversible Vibratory Plate by Wacker Corporation

9337 Wacker BPU 2540A Reversible Vibratory Plate
Check Price for 9337 Wacker BPU 2540A Reversible Vibratory Plate

Wacker BPU 2540A Reversible Vibratory Plate

  • Reliable vibratory plates offer maximum mobility.
  • Versatile reversible plates ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance
  • The only plates with a durable, integrated wheel set that provides for maximum built-in mobility.

Features

  • The unique, integrated wheel set simplifies the task of moving a reversible plate around the showroom, shop floor and job site.
  • An adjustable guide handle can be locked into a vertical position for easy transport and storage.
  • Heavy-duty frame features a central lifting point for easy on/off loading and placement of plate into trenches.
  • Tough ductile iron baseplate is extremely durable even under extreme conditions and provides for long service life.
  • Specially designed shockmount system offers a virtually vibration-free guide handle for increased operator comfort and reduced operator fatigue.

Technical Data BPU 2540A Reversible Vibratory Plate

Description Metric Inch
Operating weight 140 kg 309 lb
Working width 400 mm 15.8 in
Machine height 647 mm 25.5 in
Working height of handle (adjustable) 800 – 1.143 mm 31.5 – 45.0 in
Base plate thickness 10 mm 0.4 in
Max. centrifugal force 25 kN 5.625 lb
Vibration frequency 90 Hz 90 vpm
Max. forward and reverse travel 21 m/min 68.9 ft/min
Gradeability 30 % 30 %
Compacted area (depending on soil) 504 m2/h 5.425 ft2/h
Drive engine air-cooled single cylinder 4-stroke petrol engine
Manufacturer Honda
Type GX 160
Max. power output 4,0 kW 5.5 hp
at 3.600 1/min 3,600 rpm
Rated power output 1,5 kW 2.0 hp
at 2.800 1/min 2,800 rpm
Fuel consumption 0,8 l/h 0.9 US qt/h
Tank capacity 3,7 l 3.9 US qt
Max. allowable tilt of engine in continuous operation 20 ° 20 °
Power Train from drive engine via centrifugal clutch and V-belt directly to the Exciter

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Reversible Plate Compactors
  1. Pages:
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
 Recent Entries »