Best Door Tools Store

Husqvarna Power Pack PP 418

The Husqvarna PP 418 features a 18 hp Gas powered engine.

Technical Information

• Engine Gas twin cylinder OHV, air-cooled, electric start, Briggs & Stratton
• Motor output 18 hp, (13.5 kW)
• Flow rates: 10 gpm (40 l/min), 8 gpm (30 l/min), 5 gpm (20 l/min)
• Maximum Pressure, 2,000 psi (140 bar)
• Weight 298 lbs (135 kg.)

Applications.

• Can power any hydraulic tool requiring 5, 8, or 10 gpm flow at 2,000 psi.
• Ideally suited to provide power for Husqvarna K2500 power cutter, K3600 MK II ring saw and other power cutters.
• Power for Husqvarna DM 406 H and other core drills.
• Perfect for diamond chain saws.
• Use with Husqvarna WS 325 and other small wall saws.
• Also for breakers, tampers, drivers, chippers, drills, earth augers and more.
• 1/2″ x 25′ hose set (2 hoses) included.

Benefits.

• Unique hydrostatic pump system does not use engine rpm to regulate flow, providing more consistent and accurate flow at 5, 8, and 10 gpm.
• Electronic engine controller maintains constant engine speed under load to ensure maximum power at all flow settings.
• Automatic power-on-demand saves fuel and has a five second delay for smoother tool operation during intermittent cutting conditions.
• Automatic power-on-demand is adjustable for different tools and hose lengths and can be switched off for constant power when desired.
• Hydraulic oil is cooled by a large, air-to-oil exchanger and 9″ fan to provide maximum machine life and power.

Technical specifications.

• Hose set (2 hoses included as standard) 1/2″ (13cm) x 25 ft (7.5 m)
• Hydraulic connections Flat faced couplers with dust caps
• Hydraulic oil capacity, gal (l) 4 (15)
• Fuel capacity, gal (l) 3 (11.4)
• Dimensions (LxWxH), in (mm) 35 x 21 x 29 (89 x 53 x 74)
• 12 Volt start battery for easy operation.

.

Partner by Husqvarna K3000 Cut-n-Break With Blades

Free shipping from factory warehouse

Well suited for indoor use and smaller jobs where you want to avoid over-cutting at the corners.

Ideal for cutting pipes in trenches, grooves for cabling, expansion joints and for crack renovation.

An excellent choice for flush cutting, i.e. cutting tight against walls and floors.

Dual 9″ Diamond concrete Blades included

Depth of Cut: 2-1/2″ per pass with a maximum of 16″

Partner by Husqvarna K3000 Cut-n-Break is Suitable for:

• Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.
• Grooves can be quickly cut to create a channel for up to 3/4″ wide, perfect for water lines and electrical conduit in a single pass.
• The double blade system also aids in faster crack renovation and expansion joint repair.
• Integrated water head kit

Specifications:

• Elgard™, the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload.
• Electronic Softstart™ provides starting with normal, slow-acting fuses.
• Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.
• Standard arbor bushing 1” (25.4 mm)

K3000 Cut-n-Break General Info

The new K3000 Cut-n-Break features an entirely new cutting method for cuts as deep as 16″ (400 mm) at a very economical tooling cost.

The K3000 Cut-n-Break has a wide range of applications. It eliminates over-cutting on all types of openings requiring square corners. Precision openings for doors, windows, HVAC ductwork, pipes and more can be economically made using the Cut-n-Break system.

The new K3000 Cut-n-Break is easy to use and maintain with low tooling and maintenance costs.

CUT IN STAGES THROUGH WALLS UP TO 16″ (400 mm) THICK.

1. Each cut can be made up to 2–1/2″ (65 mm) deep.
2. The twin blades form a core in the saw cut.
3. The core is simply broken away using the breaking tool that is supplied with the K3000 Cut-n-Break.
4. When the core has been broken away, repeat the cut until the required cutting depth is achieved. Maximum 16″ (400 mm).

K3000 Cut-n-Break Features

• Elgard™, the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload
• Active Air Filtration
• Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.
• Efficient cutter
• Easy Adjustable blade guard
• Electronic Softstart™ provides starting with normal, slow-acting fuses.
• Twin blades

The Cut-n-Break method allows you to cut in stages through walls up to 16″ thick

1. Each cut can be up to 2.5″ deep
2. Since the cutter has twin blades, a core is formed in the saw cut
3. The core can easily be broken off, using the accompanying breaking tool
4. When the core has been broken off, continue cutting until the required depth is reached, Maximum 16″

.

Partner by Husqvarna K3000 Wet 14″ Saw

A powerful, versatile electric cutter with wet cutting kit. Makes it possible to do smaller cutting jobs indoors with a minimum of dust and slurry

Free shipping from factory warehouse

Blade not included

General Info

The Husqvarna K3000 Electric is one of the world’s most powerful and versatile electric saws. This machine offers new alternatives for cutting outside as well as inside. With it’s powerful motor (2.7 hp), ergonomic design and deep cutting capacity, it’s the best in its class. The K3000 Electric is not an angle grinder, it is a concrete saw from the ground up.

Applications.

• For cutting indoors and outdoors.
• Ideal for quick and easy cutting of building block, pipe, reinforcement bar, supports, etc.
• Easily adjusts between cutting different materials.

Features

• High power, a big 1800 w (120 v)
• Capacity for 14″ cutting blade (5″ cutting depth)
• Forward rotation reduces the risk of jamming and kickback
• Good distance between handles for safe control and reduced load
• Front handle that facilitates both vertical and horizontal cutting
• Comfortable patented design of the rear handle makes your job easier
• Elguard’, the advanced electronic overload protection, warns you by pulsating the rpms when you’re approaching overload
• Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels.
• SoftStart , this feature gives the saw a gradual start when the trigger is pulled. This makes it so the saw does not initially jump to full power. This feature gives the operator more control
• Pulling rotation reduces the risk of jamming and kickback.

Elgard the advanced electronic overload protection varies the rotation speed to warn of approaching overload.
Electronic soft start.

Quick locking of the spindle and large outlet in the blade guard simplify blade changes.

Integrated regulator

• K 3000 Wet has an integrated regulator that controls the water volume, ensuring a constant flow to the blade.
• The amount of water is sufficient to bind the dust without creating an excess of water.

.

Husqvarna Power Pack PP325 E

The Husqvarna PP 325 E is an electro-hydraulic power pack that is a simple and efficient, yet versatile, cart-mounted power pack that includes a tubular frame which protects components.

Technical Information

• Electric motor 480 V, 16 amp, 60 Hz, 3 PHASE.
• Motor output 12.5 hp, (9 kW)
• Flow rates: 10 gpm (40 l/min)
• Maximum Pressure, 2,000 psi (140 bar)
• Weight 205 lbs (93 kg.)

General Information

• The PP325 E can be easily transported and operated by one person
• 1/2″ x 26′ hose set (3 hoses) included.

.