Category: Shop by Brand

9578 Target by Husqvarna 13 hp Honda Portacut IV Push by Husqvarna

9578 Target by Husqvarna 13 hp Honda Portacut IV Push
Check Price for 9578 Target by Husqvarna 13 hp Honda Portacut IV Push

Target by Husqvarna 13 hp Honda Portacut IV Push

  • Free shipping from Target factory warehouse
    Model Portacut IV 13hp
    Motor Honda
    Horsepower 13 hp.
    Arbor 1 in.
    Depth of Cut 6-5/8″
    Blade Guard Capacity 18″
    Blade Shaft Rpm 2,650
  • 13 hp Honda Engine, recoil start.
  • Depth of cut with 18″ blade is 6-5/8″

Blade shaft System

  • 3VX blade shaft drive transmits more horsepower and provides longer belt life
  • Fully machined pulleys extend overall service life
  • Precision-machined, 1″ inner blade flange protects the shaft from damage when blade spins

Other Features

  • Extra heavy-duty cyclone air filter on models with Honda engines
  • Blade depth indicator standard
  • Positive screw feed raises/lowers blade quickly and easily. The lock keeps the blade at a fixed depth
  • Bilingual Lexan plastic decal provides the operator with convenient operating instructions and safety information in English and Spanish
  • Transmission control lever offers reliable and infinite variable ground speed control. 0 – 80 ft/min
  • Engine start/stop switch, push stop button on recoil models

.

9581 Target by Husqvarna 14in. GC and DG Dri Disc Diamond Blades by

9581 Target by Husqvarna 14in. GC and DG Dri Disc Diamond Blades
Check Price for 9581 Target by Husqvarna 14in. GC and DG Dri Disc Diamond Blades

Target by Husqvarna GC and DG Dri Disc 14″ Green Concrete Diamond Blades

GC5 (super premium)

  • Cuts soft to medium aggregates and provides long life.
  • Total segment height: .335″ (.260″ diamond depth: .075″ segment base)

DG5 (premium)

  • For fast cutting of abrasive limestone aggregate and green concrete.
  • Total segment height: .275″(.200″ diamond depth: .075″ segment base)

Dry or wet cutting laser welded.

  • Job Size: Small to medium
  • Horsepower Range: 5-20 hp
  • Equipment types: High Speed, Small Walk-behind, and masonry saws
  • Cutting method: Wet or dry cutting
  • Bonding/Weld type: Laser weld
  • Arbor: 1″ / 20mm
  • To reduce undercutting when wet cutting with a dry blade, be sure to minimize blade / sub-base contact

.

9618 PM10A 10in Alpha Metalgres Diamond Blade by Alpha

9618 PM10A 10in Alpha Metalgres Diamond Blade
Check Price for 9618 PM10A 10in Alpha Metalgres Diamond Blade

10″ Metalgres Wet Saw Blade for Cutting Glazed Tiles

  • Metallic looking tile that has glazed metal on the surface, metalgres is the ultimate blade for cutting this tile.
  • Introducing Alpha Metalgres blade, designed to cut metallic tile with ease.
  • Unlike any other tile blades on the market, Metalgres cuts metallic tile clean and fast without clogging.
  • Once again, Alpha® leads the way in providing the best solutions for today’s market.
  • Wet cutting only, Max Rpm 5900, 5/8″ arbor.

.

9619 Alpha Air-658 Wet Polisher by Alpha

9619 Alpha Air-658 Wet Polisher
Check Price for 9619 Alpha Air-658 Wet Polisher

Alpha AIR-658 Ultimate Air Polisher for Fabricators

  • High performance, pneumatic polishing tool designed for continuous production use.
  • Fabricators love its compact design and low weight.
  • They also know that it is very durable under some of the most adverse conditions that a tool is required to operate in.
  • Shop workers easily use this tool with little or no fatigue.
  • It has a centrally fed water distribution system that provides the best finishes possible.
  • Alpha AIR-658 is a lightweight tool that accepts 3, 4 or 5-inch discs.
  • Includes the side handle, a splash guard, pneumatic lubrication oil, and the hoses for air, water and exhaust along with the appropriate fittings.
  • Air Consumption 16 CFM
  • Air Pressure 85-95 PSI
  • Speed 3,500 RPM
  • Weight 2.64 Lbs
  • Spindle 5/8” – 11
  • Air Inlet 1/4” Npt
  • Air lead hose – 10 feet (3m)
  • Exhaust Muffler
  • Side handle (reversible)
  • Hose adapter with Water valve with hose Wrenches / Splash Guard
  • Sealed bearings to increase life and a rear exhaust system, Alpha® AIR-658 is designed to last a long time.
  • Requirements for this tool are a cast iron 2 stage compressor, a large reservoir, 5 hp for each tool.
  • Air consumption is 15 CFM and required air pressure is 85-95 PSI.
  • Alpha® AIR-658 is the best addition to any stone shop.

.

9575 TeqVac Dustless Wet/Dry Vacuum by DITEQ

9575 TeqVac Dustless Wet/Dry Vacuum
Check Price for 9575 TeqVac Dustless Wet/Dry Vacuum

Dustless Wet/Dry Vacuum

Not All Vacuums Are Created Equal!

  • Engineered for extra fine dust from drywall and concrete
  • Filters can be cleaned without removing the lid
  • Washable lifetime fabric primary and secondary filters
  • Tools and hose conveniently stored on vacuum
  • Automatic shut off keeps filters dry when full of water
  • Change from wet to dry vacuuming without stopping
  • Drain can be regulated from a drip to full flow.
  • Suction hose can be used as a drain hose.
  • No “coughing” out dust when turned on
  • Quiet operation only 81 decibels
  • Powerful 23,000 RPM motor
  • Patented double filter system
  • Exceeds OSHA guidelines
  • Optional HEPA filter captures particles down to 0.3 microns
  • 72” water lift

5-Piece Tool Set Includes:

  • One 12’ crush/kink proof hose
  • 14” wide floor tool
  • 1.5” crevice tool
  • Two 19” extension wands

Standard Filter System

  • Dustless Wet/Dry Vacuums come with fabric primary and secondary filters that are machine washable and designed for lifetime use.
  • These filters stay dry at all times and can be cleaned by wiggling the exclusive agitator rod on the top of the unit.
  • No need to open the vacuum and let dust escape.
    Compare Dustless to Typical Shop Vacs
    Features

    Dustless System
    Other System
    Ability to change between wet and dry vacuuming without stopping to change filters.
    X
    Patented filtration system enables cleaning of internal filters without opening the unit to keep dust inside the canister.
    X
    Patented filtration system designed specifically to contain extremely fine dust from dry wall and concrete cutting.
    X

    Optional disposable patented micro-prefilter that keeps secondary and primary filters clean.

    X
    Machine-washable fabric filters designed to last the life of the machine.
    X
    Quiet operation – 81 decibels.
    X
    Powerful suction that drops off very little as filters get full: 71" water lift compared to 30" to 40" on other vacs.
    X
    Does not blow dust on start up.
    X
    Automatic shut-off when full of water to protect filters and motor.
    X
    Regulating drain valve.
    X
    12′ crush proof hose can be used for pick up or draining.
    X

.

9576 Diteq TeqVac Filter Options by

9576 Diteq TeqVac Filter Options
Check Price for 9576 Diteq TeqVac Filter Options

Diteq TeqVac Filter Options

Micro-Prefilter

  • The optional Micro-Prefilter adds 5 layers of filtration, capturing particles down to 0.5 microns.
  • The Micro-Prefilter protects the primary and secondary filters, eliminating the need to clean them.
  • It retains its strength when wet and is disposable.

HEPA Filter

  • The HEPA filter can be use in place of the secondary and primary filters.
  • It captures airborne particles down to 0.3 microns for the ultimate in dust containment.
  • It is a good idea to use a Micro-Prefilter in conjunction with the HEPA filter to extend it’s life, although it is not required.

.

9562 PTC2 Diamond Crown Accessories by

9562 PTC2 Diamond Crown Accessories
Check Price for 9562 PTC2 Diamond Crown Accessories

PTC2 Diamond Crown Accessories.

Water Feed Adapter

  • Drive adapter incorporate a water delivery system for crown cooling.
  • Small diameter water adapter use with 3/16″ to 3/8″ crowns.
  • Large diameter water adapter use with 1/2″ to 4-1/2″ crowns, pilot hole must be drilled with 1/4″ PTC carbide bit.

Water Sprayer

  • Pressure pump sprayer for water cooling of the PTC carbide bit and PTC2 diamond crown.
  • Capacity: 1 gallon.

Water Feed Clamp Kit

  • Clamp attach the nozzle directly to the drill for a constant flow of water to the cutting edge freeing both hands to control the drill.
  • Kit includes: depth stop, water feed connector, water feed tube and clamp.
  • Use the water feed tube adapter with the water Feed either with the PTC2 Diamond Crowns or PTC carbide bits.

Piloting Guide Pads.

  • PTC Diamond piloting guide pad ensures non slip start up of the 3/16″ to 3/8″ (5-10mm) PTC Diamond crowns.

.

9564 Armeg PTC2 1-3/8in Diamond Crown Bit Starter Kit by Gundlach

9564 Armeg PTC2 1-3/8in Diamond Crown Bit Starter Kit
Check Price for 9564 Armeg PTC2 1-3/8in Diamond Crown Bit Starter Kit

Armeg PTC 1-3/8in Diamond Crown Bit Starter Kit

  • This handy starter kit comes with everything needed to complete the drilling of porcelain tile
  • Starter kits include 1-3/8″ PTC diamond crown bit, PTC carbide 1/4″ pilot drill, 1/4″ professional masonry drill, water fed adaptor, water feed tube and nozzle, & water feed clamp.

.

9561 Armeg PTC2 Diamond Porcelain Crown Bit by

9561 Armeg PTC2 Diamond Porcelain Crown Bit
Check Price for 9561 Armeg PTC2 Diamond Porcelain Crown Bit

Armeg PTC2 Diamond Porcelain Crown Bit.

The solution to durability and extended life: Thin wall, continuous diamond crowns for fast, efficient cutting and extended life. Not to be confused with some short life diamond grit alternatives.

  • Thin wall, continuous diamond crowns for fast, efficient cutting and extended life.
  • Max operating speed, is between 700 and 900 Rpm.
  • Perfect combination of diamond grade and precision manufacturing, provides exceptional products strength and greatly enhanced tool life.
  • Drive adapter incorporate a water delivery system for crown cooling.
  • Anchor and fasten holes for small plugs and anchors.
  • Drill water pipes, shower heads & faucets, drain pipes & toilet drain pipe.
  • Bits must be used with water adapters small diameter use with 3/16″ to 3/8″ crowns large diameter water adapter use with 1/2″ to 4-1/2″ crowns
  • Made in the UK.

Features:

  • 3/16″ Continuous diamond crown matrix expose a new cutting surface while drilling for faster cuts and longer life.
  • Unique profile produces very accurate and neat holes with minimal entry and exit damage.
  • Specially designed diamond crown construction reduces drag and allows for easy tile slug removal.
  • Life expectancy of the Diamond Crown is 350+ holes in Porcelain tile with proper usage.
  • Holes can be drilled in less than 2 minutes.
  • The PTC2 Diamond Crown must be used with a PTC water feed adapter.
  • Maximum depth of cut: 3/4″.
  • Water swivel sold separately, see item 9562

.

Recent Entries »