The Best Concrete & Masonry Tools of 2017, Top-Rated, High Quality Concrete & Masonry Tools Online: Best Door Tools Store

Category: Concrete & Masonry Tools

8321 Northrock Ceiling Grinder by

Northrock Ceiling Grinder

Available with either 1-1⁄2 hp electric or 4 hp gasoline-powered motors designed for remote applications or sites without electric power
These units run at 3500 RPM and are sized to handle even the most difficult grinding chores without stalling
Adaptable to any flexible shaft
Rugged all steel construction
Easy height adjustment on pedestal mount model
Multiple speed models with precision pulleys for speed up to 10,000 Rpm
Hinged belt guard allows for easy access while preventing the operator from permanently removing

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools

8317 Northrock Vibrator Heads by

Northrock Vibrator Heads

Seven Northrock vibrator heads are available in a range of diameters from 3/4″ up to 2-1/2″
Diameter is selected by the scope of the job and the speed required to complete it
A high level of centrifugal force amplitude are created by rotating Northrock’s unique eccentric weights within the head at the desired frequency
A special oil bath system keeps the weights lubricated at all times
All heads are sealed at the factory and are maintenance free
Built for the busy contractor and a wide range of tough rental applications, they are designed for reliability and durability over extended periods of time

Special heads

A short 4-1/2″ head available for slabs, tilt-up and other select precast work
Coated heads from 1-1/2″ to 2-1/2″ diameter are available to protect epoxy-coated rebar

Posted in Concrete & Masonry Tools, Concrete Vibrators

8318 Northrock Gas Backpack Pro 50 Concrete Vibrator by

Northrock Gas Backpack Pro 50 Concrete Vibrator

Power Units

Northrock Backpack vibrators are driven by a fuel efficient two cycle, 50cc, 2-1/2 hp gas engine
This power unit is lightweight only 19 lbs.
Powerful enough to drive any of Northrock’s 7ft, 10ft or 14ft flexible shafts and vibrator heads up to 2″ in diameter
A quick connect/disconnect system allows for assembly/disassembly in seconds
Designed for ease of operation and operator comfort
Free shipping

Posted in Concrete & Masonry Tools, Concrete Vibrators

8315 Northrock Flex Shafts Standard by

Northrock Flex Shafts Standard

Lengths from 2 ft to 21 ft in convenient increments
Lengths up to 60 ft are available via a simple shaft connector
Heavy-duty shafts are stiffer and are used primarily for better poke ability

Posted in Concrete & Masonry Tools, Concrete Vibrators

8316 Northrock Flex Shafts Pencil by

Northrock Flex Shafts Pencil

Lengths from 2 ft to 21 ft in convenient increments
Lengths up to 60 ft are available via a simple shaft connector
The lighter duty pencil shafts are available for applications where better flexibility is required and may be used with all size Northrock poker vibrator heads

Posted in Concrete & Masonry Tools, Concrete Vibrators

8309 Edco 18in SS-16A Self Propelled Saw by

Check Price for 8309 Edco 18in SS-16A Self Propelled Saw

Edco SS-16A – Self Propelled Saw

Ideal for highway, road and bridge deck repair
Ideal for utility installation and/or traffic loop installation

Free shipping
Compact size
Economical saw – cuts straighter, providing longer blade life
Friction-drive rear axle prevents operator from overdriving blade
Console-mounted controls are within operator’s easy reach
Easy-rolling, 8” x 2” rear drive wheels and 4” x 2” front wheels

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Self-Propelled Walk-Behind Concrete Saws

8310 Edco SS-20 – 20in Self-Propelled Concrete Saw by

Check Price for 8310 Edco SS-20 - 20in Self-Propelled Concrete Saw

Edco SS-20 – 20″ Self-Propelled Model

Ideal for highway, road and bridge deck repair. Ideal for utility installation and/or traffic loop installation

Electric option available
Compact size
Economical saw cuts straighter, providing longer blade life
Friction-drive rear axle prevents operator from overdriving blade
Console mounted controls are within operator’s easy reach
Easy rolling, 8” x 2” rear drive wheels and 4” x 2” front wheels
Stress proof, precision-machined, 1-3/4 in. steel arbor shaft
Includes electric start, 12-volt battery and heavy-duty 15 Amp charging system
Swing-away, rear 3-gallon fuel tank
Screw-type depth control w/ lock guarantees accurate cutting
Maximum cutting depth : 7-3/4 in.

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Self-Propelled Walk-Behind Concrete Saws

8311 Edco SS-35 35 HP Self-Propelled Concrete Saw by

SS-35 – 35 HP Self-Propelled Concrete Saw

Ideal for

Highway, road and bridge deck repair.
Ideal for utility installation and/or traffic loop installation
Ideal fir airport construction

Stress proof, precision-machined, 2 in. steel arbor shaft
Includes electric start, 12 Volt battery and heavy-duty 30 Amp charging system
Swing away, rear 8 gallon fuel tank
Maximum cutting depth : 12 in.

Easy to Operate

Positive-traction, chain-drive rear axle prevents slippage and improves cutting speeds
All controls are console-mounted for easy access
Single lever controls saw speed and raising/lowering of blade
Locking depth control allows operator to easily return to same depth, cut after cut

Easy to Maintain

Heavy-duty, self-aligning ball bearings have easy-to-reach lube fittings for reduced maintenance
Rear-axle tracking guide allows for quick adjustment to keep saw cutting straight
Oil drain extends to edge of frame for cleaner oil changes

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Self-Propelled Walk-Behind Concrete Saws

8312 Edco SS-65 Self Propelled Concrete Saw by

Edco SS-65 Self Propelled Concrete Saw

57 HP Turbo Diesel Saw

9 belt (Diesel), 3VX cog belt drive delivers smoothly from engine to arbor shaft
14″ to 36″ blade capacity
Heavy-duty bearing assemblies and alloy arbor shaft
Heavy-duty gauge steel construction
Self-propelled hydrostatic power drive system
Depth guage & hour meter
10-gallon fuel tank
Includes electric start, 12 volt and heavy duty 30 amp for gasoline & 60 Amp for diesel charging system
All controls are console mounted and the water pump system is standard
Stress proof, precision machined, 2″ steel arbor shaft
Locking depth control allows operator to easily maintain consistent depth of cut
Adjustable, electric hydraulic depth control raises and lowers blade smoothly and effortlessly
Rear axle tracking guide allows operator to easily maintain consistent depth of cut
Single lever controls saw speed and raising/lowering of blade in and out of cut

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Self-Propelled Walk-Behind Concrete Saws

8313 Northrock Electric Power Units by

Check Price for 8313 Northrock Electric Power Units

Northrock Electric Vibrator Power Units

Available in three power option : 1-1/2 hp, 2 hp & 3 hp
Free shipping
1-1/2 hp max head diameter 1.75″
2 hp & 3 hp max head diameter 2-1/2″
High strength cast aluminum housing
Rugged shock absorbing frame
Easy access to all serviceable parts
Shaft length and head diameter available up to 2-1/2″ in diameter
Motor size is selected to maintain an in-material working frequency of about 10,000 Vpm under load
Weight: 1-1/2 hp 19 lbs, 2 hp 23 lbs, 3 hp 25 lbs.
1-1/2 hp 13 Amps, 2 hp 15 Amps, 3 hp 19 Amps
All Northrock power units may be configured to drive alternate brand shafts and heads
Serviceable parts are easily accessible
Replacements shaft and heads available form the following brands:

Stow, OZTEC, Northrock, Stone, Mikasa (Multiquip), Viber, Master, Wacker, and Wyco.

UL/cUL Listed

Posted in Concrete & Masonry Tools, Concrete Vibrators