9167 Belle Group Stream Screed Beams by
5 different beams to suit your application
- 8 ft
- 10 ft
- 12 ft
- 14 ft
- 16 ft (2 drive units recommended for 16 ft)
.
Category: Concrete & Masonry Tools
9157 Bosch SpeedWave Diamond Blades by
Laser Fusion blades with exclusive progressive segment spacing, every fifth segment is raised for more aggressive cutting
Bosch SpeedWave Segmented Masonry Blade
- Large 10mm diamond rim height
- For fast cutting of brick, block, concrete, block, brick, steel, marble, natural stone, refractory material, soft stone, and sand stone
- Can be used with angle grinders, worm-drive saws, and circular saws
- Wet/Dry cutting
- Strong Steel Core .080″
- Standard 7/8″, 5/8″ Arbor
Patented Laser Fusion blades set the Bosch line apart from the competition. Exclusive process uses a precision laser application to fuse a proprietary mix of diamonds and metal bonding material directly to the steel blade core. This unsurpassed bonding delivers superior diamond retention and distribution along with greatly increased cutting speeds up to 30% faster than standard blades in the same price range. Cuts are consistently cleaner and blade life is ultimately maximized.
.
9159 Belle Group Trench Rammer by
Belle Group Trench Rammer
Features
- Reliable, easy to start Honda 4 cycle gas engine
- Low exhaust emissions
- 3 Fuel filters and a large capacity air filter improves service
life in harsh conditions - Precision direct gear drive with oil bath lubrication system
- Extra tough heavy duty bellows protect internal parts from abrasive dirt
- Perfect balance improves performance and reduces
the effort required to operate - Heavy duty, chromed steel protection frame
- Adjustable handle height for improved operator comfort
- Recoil protection
- RT 50 121 lbs
- RT 65 147 lbs
- RT 66 145 lbs
- RT 74 165 lbs
Weight
.
9152 DeWalt SDS Max Hammer Steel by
DeWalt SDS Max Hammer Steel
- Fully hardened steel body delivers increased life and durability.
SDS Max Shank
.
9141 Dewalt 1-1/8in Hex Shank Steel by
DeWalt 1-1/8″ Hex Shank Steel
- Bull Point, Flat chisel, 3″ wide bit, 17″ asphalt cutter, 1″ ground round driver, 5″x20″ clay spade, 6″x6″ tamper plate, 15″ tamper shank.
1-1/8″ Pavement Breakers Shank
.
8327 Edco DS-18 – 18in Concrete & Asphalt Saw by
Edco DS-18 – 18″ Downcut Concrete & Asphalt Walk-Behind Saw
Professional Contractor Saw
- Free shipping
- Gasoline 13 hp, Honda motor.
- Electric 5 hp, 230V, 1 Phase or 5 hp, 230/460V, 3 Phase motor option.
- Heavy-Duty Anti-Vibration engine mount
- Screw boot belt tensioner prevents frame damage
- 18” blade capacity, Down-cut blade rotation
- Optional water tank assembly kit available
- Heavy duty frame and undercarriage are 7-gauge steel to eliminate frame vibration and bending
- Easy switch guide bar with lifting line
- Screw boot belt tensioner prevents frame damage
- High quality molded rubber wheels
- Solid steel lifting handles
- Wide T handles with rubber grips
- Large screw type depth control
- Heavy duty lifting bail
- 7-gauge steel blade guard with welded protective segment flap
- Turn-To-Lock throttle cable
.
8326 Multiquip Cobra Dry Drilling Core Bit 10-Inch Long by
Multiquip Cobra Dry Drilling Core Bit 10-Inch
Cobra Dry bits are engineered to drill reinforced concrete with no water.
- No water needed : eliminates the mess associated with drilling wet
- No expensive core rigs
- No long setup time : plug in your drill and go to work. save as long as 20 to 40 minutes per hole
- Interchangeable spring-loaded center pin : uses the same drilling accessories between sizes
- Interchangeable shank
- Drills reinforced concrete : drills up to 6,000 PSI cured concrete with up to 1″ rebar
- Drill where standard dry diamond or carbide core bits won’t
- Thread size : 1-1/4″-7
.
8324 Pearl Vacu-Guard with Carbide Protection by
Pearl Vacu-Guard with Carbide Protection
- Tungsten carbide wear pads for longer life.
- Durable and effective dust containment system. For grinding only.
- Pearl’s exclusive flexible diaphragm allows the operator to adjust the grinder angle without sacrificing dust containment efficiency.
- A special Delrin seal strip allows the unit to flow easily over a variety of surfaces.
- Heavy duty aluminum casting.
- Lightweight, long lasting and durable.
- Optional carbide wear Pads, protects the Delrin slide from excessive wear, thus increasing life.
- Adjustable Hub Adapters. Able to adapt to a variety of angle grinders.
.
8325 Multiquip Cobra Dry Drilling Core Bit 6-Inch Long by
Multiquip Cobra Dry Drilling Core Bit 6-Inch Long
Cobra Dry bits are engineered to drill reinforced concrete with no water.
- No water needed : eliminates the mess associated with drilling wet
- No expensive core rigs
- No long setup time : plug in your drill and go to work. save as long as 20 to 40 minutes per hole
- Interchangeable spring-loaded center pin : uses the same drilling accessories between sizes
- Interchangeable shank
- Drills reinforced concrete : drills up to 6,000 PSI cured concrete with up to 1″ rebar
- Drill where standard dry diamond or carbide core bits won’t
- Thread size : 1-1/4″-7
.
8320 Northrock Pro 3200 Series Power Screed by
Northrock Pro 3200 Series Power Screed
- Eccentric design with 60% more power for high productivity and ease of use.
- Wrap-around frame design provides greater strength and better isolation.
- Patented magnesium blades cur and roll the concrete in front of the screed, reducing the need for grading while the ten inch wide shoe promotes flatter floors.
- Available with blades form 4 ft to 14 ft for one man operation and 16 ft to 22 ft for two man operation.
- 31cc. 4 cycle Honda gasoline engine power a well engineered and field proven eccentric system to frequencies up to 6000 Vpm.
- This system is mounted on an angle to the blade, allowing the vibration to be transmitted both horizontally and vertically.
- The combination of high frequency combined with the angled eccentric system design promotes smoothness and rapid consolidation of the mix.
- Large rubber shock mounts direct vibrations away from the operator and down into the mix.
- A strong, light weight frame allows the blades to be changed in seconds while the pull handles adjusts quickly to the operators height for optimum productivity.
- Power unit and frame weigh in at only 28 lbs making the system easy to maneuver and transport around the site.
- Max bar length 12 ft. per power unit.
- 10 ft to 22 ft bars ships by truck freight.
.