Tag Archives: Raimondi

3041 Raimondi Berta Advanced Grout Cleaning Machine by Raimondi

3041 Raimondi Berta Advanced Grout Cleaning Machine
Check Price for 3041 Raimondi Berta Advanced Grout Cleaning Machine

Grout Cleaning Sponge Machine.

  • 20% lighter than original Berta
  • Constructed of die-cast aluminum body
  • Slimmer design to get in tighter spaces
  • Longer more ergonomic adjustable handle
  • Electric grout cleaning machine designed to clean large grouted areas quickly and easily.
  • one man can clean 800-1,500 sq.ft. per hour, standing up!
  • Part of the 3-Step Solution To Grouting & Cleaning Large Areas from Raimondi.
  • Powered by an 110V motor through a speed reduction system
  • The sponge rotates slowly as the machine is pulled backwards at 45 degrees to the the grout joint.
  • The sponge rotates through a water sump and is cleaned before contacting the floor again.
  • The dampness of the sponge is controlled by a lever.
  • Sponge for sanded grout and ground fault interrupter included.

  • The Berta leaves grout joints evenly full and cleans the surface with one pass.
  • Weighing only 84 lbs, this machine is portable enough for one man to carry.
  • Sponges are easily changed an are available for epoxy grout and sanded grout.
  • Sponge life is approximately 5,000 sq.ft.

Features

  • Easy to remove water tank, 4 gal. capacity.
  • Convenient pressure adjustment.
  • Magnetic “quick clutch” system for fast sponge replacement.

.

1066 XL Hydro Sponge by Raimondi

1066 XL Hydro Sponge
Check Price for 1066 XL Hydro Sponge

XL Hydro Sponge

  • Extra large fine pore hydrophilic sponge.
  • Soft & durable, excellent for removing excess grout, rinse clean.
  • Extra Large fine pore. 7-1/2″x 5-1/4″x 2″.
  • Rounded edges to prevent “digging out” or marring of grout.
  • Only $1.09 Each, 450 pcs bale quantity $490.50
  • Imported from Greece.
  • Use a clean grout float to remove any excess grout from floor.
  • Allow up to 15 minutes for the grout to set and then proceed to wipe floor clean.
  • Keep a clean bucket of water available and replace as necessary. Take a damp sponge and place flush on tile at an angle to tile joints. Pull sponge down and towards you. Be careful not to dig the grout mortar out of the joints.
  • Flip sponge over and repeat making sure to overlap the adjacent area you have just wiped. Then rinse sponge thoroughly and repeat process. Some areas may need to be wiped more than once.

.

Recent Entries »