The Best Surface Preparation Tools of 2017, Top-Rated, High Quality Surface Preparation Tools Online: Best Door Tools Store

Category: Surface Preparation Tools

7909 Edco Single-Disc Grinder by Edco

Check Price for 7909 Edco Single-Disc Grinder

Edco Single-Disc Grinder Production Rate:

11″ Working width will grind approximately 200-250 sq ft per hour at 1/32″ with Edco Dyma-Serts

Includes:

1-Multi accessory disc, 2″ vacuum port & water port

Requires:

3-Grinding insert accessories per loading

Ideal For:

Areas less than 1,500 Sq ft
Residential applications
Removing mastics, sealers or smoothing concrete
Length 41″, width 24″

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools

7920 Stow Surface Planer Accessories by

Check Price for 7920 Stow Surface Planer Accessories

Stow planer/Scarifier individual flails and accessories.

Edger attachment complete with self aligning bearing unit, side plate, drum w/axle assembly, less flails.
Star flails 1-3/4″ OD x 5/8″ ID x 1/8″ wide, heat treated high carbon, 12 teeth points.
Beam flails 1-3/4″ OD x 5/8″ ID x 1/4″ wide, heat treated high carbon, 12 flat tips.
Pentagonal flails 1-3/4″ OD x 5/8″ ID x 1/8″ wide, 5 teeth with tungsten carbide inserts.
Drum rod 1/2″ OD x 9″ long.
Drum 2 section, heat treated steel, complete with support straps less flails.

Posted in Concrete & Masonry Tools, Surface Preparation Tools

7919 Stow Surface Planer Flaits Kits by

Check Price for 7919 Stow Surface Planer Flaits Kits

Starkit 124-120.

Includes 124 flails and 120 spacer washers. Intended for removing surface coatings from floors while minimizing the resulting damage to the cap material. Will produce the smoothest texture possible. Generally not to be utilized for removing concrete or asphalt. Average service life: up to 3 hours.

Beamkit 124-120.

Includes 124 flails and 120 spacer washers.Designed for light to medium duty concrete or asphalt removal projects. Popular alternative to tungsten carbide tipped flails. Will produce a medium rough texture. Average service life: up to 3 hours.

Beamkit 184-56.

Includes 184 flails and 56 spacer washers.Intended as a low-cost solution for removing painted, thermo and cold plastic-type traffic lines from asphalt or concrete. Productivity rates and service life on asphaltic materials are substantially higher. Average service life: up to 10 hours.

Pentakit 84-88/52-148

Includes 84 flails and 88 spacer washers. Designed for heavy duty concrete or asphalt removal projects. Ideal for removing trip and fall hazards. Typical finish has rough, broom swept texture. Maximum productivity versus initial investment. Average service life: up to 250 hours.

Posted in Concrete & Masonry Tools, Surface Preparation Tools

7893 Stow Scarifiers Planers by

Stow Scarifiers Planers

Planers are ideal for removing trip-and-fall hazards, stripping brick, high tensile floor coatings or profiling any surface for a new coating. Specially designed carbide flails can effectively remove thermo- and cold plastic-type markings from streets and industrial floors. Stow Planers make your surface preparation seem plane easy.

Electric Model 220 Volts, Single Phase.
Stow scarifier length 39″, Width 17.5″.
Blank drum included with planer
The desired effect is achieved by positioning both flail and spacer selections as well as flair type.
Positioning the wheels behind the drum allows to cut through high spots and irregularities on slab surfaces with greater consistency.

Reasons Why your next planer should be a Stow 8FP Series…

Comfortable Operator Handle– Full-with, tubular design maximizes operator leverage & control. Anti-slip polyurethane coating helps maximize productivity & minimize fatigue.
Twin V-belt Drive System– Absorbs & minimizes shock loading back to power source. Twin-belt configuration provides extended service life & redundancy.
Dual V-belt Tension Adjustment– Properly aligns engine & maintains belt tension to factory specifications. Proper tension increases belt & bearing service life.
External Grease Fitting– Facilitates greasing bearings at regular intervals to maximize service life
Water-mist dust-control fitting– Allows installation of a value and water source as an alternative method for dust control.
Drum Positioned in front of Wheels– Increases machine stability by reducing recoil forces. Provides greater uniformity and consistency when removing surface coatings.
Replaceable outboard bearing bushing. Precision-broached hexagon-shaped bushing can be quickly replaced in the field. Heat treated to maximize service life.
Side Access Door Allows drum to be quickly changed without tipping machine forward or backward
Replaceable Forward Casters & Axle-Worn components can be field replaced individually or together without realignment difficulty.
Replaceable wear bushings in all pivot areas-Heat treated, full-length bushings increase service life in high-wear areas.
Convenient Oil Drain-Promotes proper oil change intervals on engine-powered units.
Screw-Type Drum Height Control System-Alloy steel screw configuration allows continuous force against the rear casters during operation. System increases stability by reducing recoil forces during operation. Rubber sheath reduces foreign material contamination.
Drum-Height control lever-Operator input controls drum height during operation. One complete revolution produces approximately 1/16″ vertical height movement.

Posted in Concrete & Masonry Tools, Surface Preparation Tools

7880 Edco Traffic Line Remover by Edco

Edco Traffic Line Remover

Remove traffic lines from asphalt or concrete – and get the job done quickly!

EDCO’s easy-to-use Traffic Line Remover can be pushed or pulled by one person in congested or limited access areas such as city streets, crosswalks and school safety zones.

Move the unit side to side for feathered-edge patterns that weather quickly and blend with the undisturbed road surface.

Production Rate:

7″ Working width will grind approximately 700-1000 lineal ft per hour with Edco TLR Carbide Cutters
Length 46-1/2″, Width 29″

Includes:

3-24 Bit carbide cutter assemblies

Requires:

3-Carbide cutter bit assemblies

Ideal For:

Removing traffic lines and markings
Removing painted and thermoplastic lines

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools

7872 Edco Turbo Max Combo 7in Turbo Grinder by

Check Price for 7872 Edco Turbo Max Combo 7in Turbo Grinder

Edco Turbo Max Combo-7 7″ Turbo Grinder

Features:

Three-position articulating frame adjustment for left angle, right angle or straight position grinding
Four-position dust shroud allows flush grinding against any vertical surface in the left angle, right angle or straight position
Multiple-position handle assembly allows the operator to work behind the unit for edge grinding or in front of the unit and control the amount of grinding pressure applied
Adjustable tubular handle construction provides operator maximum grinding flexibility and allows for complete clearance of any vertical surface
Available with 5.5 HP Honda gasoline engine or with electric 2 HP, 115/230 V motor
New & improved tapered roller bearings provide less maintenance and longer life

Electric Motor has a Flex Head Assembly
Ideal For:

Edge grinding along vertical surfaces
Grinding rough concrete surfaces
Grinding surfaces 4 times faster than a traditional floor grinder

Gas Motor has a Rigid Head Assembly
Ideal For:

Preparing a smooth, flat floor to receive a new coating
Grinding uneven expansion joints, high spots, joint curls and bridge decks
Removing coatings
Grinding rough concrete surfaces

Production Rate:

7″ Working width will grind approximately 300-400 lineal ft per hour at 1/16″ with an Edco diamond cup wheel

Includes:

7″ diamond cup wheel & standard vacuum port

Ideal For:

Grinding uneven expansion joints, high spots, bridge decks or removing coatings in small areas
Grinding curbs and gutters for proper flow trenching
Edge grinding along vertical surfaces
Removing coatings, build-ups, markings, overlays or paints

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools

7873 Edco 7in Turbo Grinder Accessories by

Check Price for 7873 Edco 7in Turbo Grinder Accessories

Edco 7″ Turbo Grinder Accessories

17 Segments 7″ Diamond Cup Wheel to be used with Edco’s TG-7 or TMC-7 grinder
Wet or Dry Grinding Grinding hard surfaces Feather edging sidewalks, curbs, and gutters Grinding away heaved, cracked areas of gutters and curbs to allow proper gutter drainage
15 point carbide cutter disc 7″ Scarifier Assembly is to be used with Edco’s TG-7 grinder only
Removing coatings, spot removal of slab markings and trip hazards

Posted in Concrete & Masonry Tools, Grinding Heads, Surface Preparation Tools

7874 Edco TG-10 10in Turbo Grinder by

Check Price for 7874 Edco TG-10 10in Turbo Grinder

Edco TG-10 10″ Turbo Grinder

Edco	TG-10,11H	TG-10,5B	TG-10,5B	TG-10,11P
Power	Gasoline	Electric	Electric	Propane
Horse Power	11hp	5hp 230 V	5hp 230/460 V	11hp 115 V
Phase	NA	Single	Three	NA
RPM’s	2520	2275	2275	2520
Belts	Std. “V”	Std. “V”	Std. “V”	Std. “V”
Length	43″	43″	43″	43″
Width	21″	21″	21″	21″
Weight	180 lbs	208 lbs	208 lbs	254 lbs

Production Rate:

10″ Working width will grind approximately 400-500 square ft per hour at 1/16″ with an Edco diamond disc

Includes:

1-10″ diamond disc & standard vacuum port

Rigid Head Assembly Is Ideal For:

Grinding uneven expansion joints, high spots, joint curls and bridge decks
Removing coatings
Grinding rough concrete surfaces

Flex Head Assembly Is Ideal For:

Preparing a smooth, flat floor to receive a new coating
Removing coatings
Grinding rough concrete surfaces
Grinding surfaces 4 times faster than a traditional floor grinder

EDCO’s TG-10 Turbo Grinder Now: includes a Multi Vac-Port that will fit both 2″ and a 3″ Vacuum Hose!

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools

7868 Edco 2EC/2GC Dual Disc Grinder by

Edco 2EC/2GC Dual-Disc Grinder

EDCO Grinders – Proven in over 40 years of use. Accept no substitute!

Production Rate:

22″ Working width will grind approximately 400-500 sq ft per hour at 1/32″ with Edco Dyma-Serts

Includes:

2-Multi accessory discs
Grinder Now Includes a Multi Vac Port that will fit both 2″ and a 3″ Vacuum Hose!
Water port
Electric models have a 115/230 voltage selector switch

Features:

Gas, electric & propane power options available
Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
Counter-rotating discs prevent machine from pulling side to side and give operator greater control
6-Grinding insert accessories per loading

Ideal For:

Large or small areas
Smoothing concrete in large and small areas
Light grinding or cleaning of concrete surfaces
Leveling uneven joints
Removing mastics, thin-set, high spots, sealers, epoxies and urethanes
Lightly texturing slippery concrete surfaces
Length 44.5″, width 27″, Height 44″

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools

7870 Edco Four-Disc Grinder by

Edco Four-Disc Grinder

EDCO Grinders – Proven in over 40 years of use. Accept no substitute!

Dimensions:

Length 49″ x Width 40″

Production Rate:

36″ Working width has 4 square feet of surface contact

Includes:

4-Multi accessory disc, 3″ vacuum port & water port
Electric 5 hp 230 Volts Single Phase motor.
Propane 11 hp 115 Volts starter.

Features:

Gas, electric or propane power sources available
Includes 4 multi-accessory discs that accept Dyma-Serts, Strip-Serts and all other grinder accessories
4 counter rotating discs are double neoprene mounted for smooth, even action
Fast controlled grinding for larger areas
12-Grinding insert accessories per loading

Ideal For:

Production grinding and floor cleaning on large surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas.

Posted in Concrete & Masonry Tools, Surface Grinders, Surface Preparation Tools