Category: Shop by Brand

162675 MK Manta IV Core Drill Rig by MK

162675 MK Manta IV Core Drill Rig
Check Price for 162675 MK Manta IV Core Drill Rig

MK Manta IV Core Drill Rig

  • Free shipping to a commercial address in the continental US

    • Technical Information

    • Motor: 2-1/2 hp, 110 V, 18 Amp electric motor
    • No Load Speed: 700 RPM
    • Motor Spindle: 1-1/4″ UNC
    • Drilling Capacity: 6″
    • Carriage Travel: 21″
    • LxWxH: 15″ x 9-1/2″ x 34″
    • Weight: 30.5 lb

    General Information

    • For wet cutting of concrete, stone and masonry
    • 6″ maximum bit capacity
    • Thermal overload protection
    • Anchor base for vertical and horizontal drilling
    • Four base leveling screws for precise drill alignment
    • Single lever “slip-through” feed handle
    • Integrated water feed with flow valve and quick disconnect hose fitting

    .

    Posted in MK Core Drills & Bits, MK Diamond, Shop by Brand

    3104 Boomerangle 45 Degree Miter by Boomerangle

    3104 Boomerangle 45 Degree Miter
    Check Price for 3104 Boomerangle 45 Degree Miter

    Boomerangle 45 Degree Miter

    • Allows tile to be diagonally cut at a precise 45 degree angle for easier installation and faster set up and cutting time.
    • Made in the USA.
    • Fits most tile saws including Target, MK and Felker saws.
    • V-CAP Miter also available.

    .

    Posted in Shop by Brand

    3105 Miter V-Caps for Boomerangle by Boomerangle

    3105 Miter V-Caps for Boomerangle
    Check Price for 3105 Miter V-Caps for Boomerangle

    Miter V-Caps for Boomerangle

    • Attaches easily to Boomerangle 45 (required).
    • Cut many types of trim tiles time after time with fewer mis-cuts.
    • Miter V-caps, quarter round and radius tiles in two positions.
    • Will also cut field tile at any degree.

    .

    Posted in Shop by Brand

    1107 Crown Concrete Screed King by Crown Construction Equipment

    1107 Crown Concrete Screed King
    Check Price for 1107 Crown Concrete Screed King

    Screed King Honda 4-Stroke GX35

    • 75% less vibration to operators hands.
    • No tools required to remove screeds bars
    • 5.5″ base allow the screed to float in any slump of concrete.
    • Unique curl edge helps to roll the excess concrete back to the rackers and allows the screed to float or ride on forms.
    • No brackets or adjustable torsion rods mean no crevices for concrete to gather-in, making clean-up a breeze.
    • Adjustable handlebars can accommodate any user height in any depth of concrete.
    • Honda 4-strokes engine is isolated from vibration with rubber mounts.
    • No flex shaft to lubricate, oversize bearing system is factory sealed.
    • Clamp-on mounting system allows the power head to be offset to work under protrusions
    • Screed King delivers high frequency vibration that eliminates the honeycomb effect and speeds finish time.
    • Power unit only, bar not included

      • .

    Posted in Crown, Crown Screed King Concrete Screeds, Shop by Brand

    3014 Felker FRS-38+ Rail Saw by Husqvarna

    3014 Felker FRS-38+ Rail Saw
    Check Price for 3014 Felker FRS-38+ Rail Saw

    Felker FRS-38 Plus Rail Saw Features.

  • Buy a FRS-38 and Save
  • FRS-38 was $1874.99 now only $1774.99 limited to quantity on hand
    • Free Shipping from Felker factory warehouse to a commercial address in the lower 48 states.
    • Free TM-10 Diamond blade
    • Marble and granite rail saw feature folding legs and wheels for easy for added job site mobility.
    • Adjustable locking plunge cut capabilities aid in cutting outlet and other openings.
    • 38″ rip cut, cuts 26″ x 26″ diagonally.
    • Depth of cut 2.6″. Weight 154 lbs.
    • Powerful 1.5 hp motor, 110 Volts.
    • 10″ blade capacity, 5/8″ arbor. 45 degree pivoting head.
    • New wheel kit, cutting table extension included.
    • Three-pieces cutting surface detaches from water tray for easy cleaning and access to the water pump.
    • Steel construction with powder coated finish to resist wear and corrosion.

    .

    Posted in Shop by Brand

    158367 MK-2000 2-Speed Hand Held Dry Core Drill by MK

    158367 MK-2000 2-Speed Hand Held Dry Core Drill
    Check Price for 158367 MK-2000 2-Speed Hand Held Dry Core Drill
  • The MK-2000 is a powerful dry diamond core drill for shock-free drilling in brick and other abrasive materials.
  • This professional tool is suited to create wall and ceiling orifices up to 5-1/4″ in diameter.
  • Electronic torque limitation and speed control guarantee constant Rpm even under load.

    • MK-2000 Features

    • Mechanical safety clutch
    • Acoustic overload indicator
    • Electronic torque limitation and speed control
    • Metal gearbox housing
    • Maintenance-free double-speed gearbox
    • Metal carrying case

    .

    Posted in MK Core Drills & Bits, MK Diamond, Shop by Brand

    158368 MK-130/3 3-Speed Hand Held Wet Core Drill by MK

    158368 MK-130/3 3-Speed Hand Held Wet Core Drill
    Check Price for 158368 MK-130/3 3-Speed Hand Held Wet Core Drill

    MK-130/3 3-Speed Hand Held Wet Core Drill

    General Information

    The MK-130/3 is a fast, efficient drilling system. Use it hand-held for up to 3″ diameter and/or rig-mounted for up to 6″ diameter core bit.

    The MK-130/3 combines a robust all aluminum housing with a compact size and powerful 17 Amp motor. The heavy-duty design and power reserve make it suitable for continuous use. The mechanical 3-speed gearbox allows the operator to select the best speed for the core bit diameter. The result is optimum drilling and longer tool life.

    The MK-130/3 includes a built-in leveling bubble, safety slip clutch, carrying case, water swivel, thermal overload signal and Ground Fault Circuit Interrupter.

    .

    Posted in MK Core Drills & Bits, MK Diamond, Shop by Brand

    2032 Diamond Hand Pad Polishing Kit by Abrasive Tech

    2032 Diamond Hand Pad Polishing Kit
    Check Price for 2032 Diamond Hand Pad Polishing Kit

    Diamond Hand Pad Polishing Kit

    Our flexible diamond sheets come standard with hook and loop backing. Used with the heavy duty re-usable hand pad

    • Kit includes, 70, 120, 220, 400, 600, 800, 1800 & 3500 diamond grit polishing strips
    • The re-usable hand pad provides more control and less waste.
    • Ergonomically designed Hook and Loop backed hand-block
    • Diamond hand-pads works great on marble, granite, agglomerated stone, ceramics, glass and composites
    • Their ideal hand size allows for easy finishing to surface shapes and areas that are hard to reach with power tools
    • Not for use on polished flat surfaces
    • Hand block size is 2-1/4″ x 4″

    .

    Posted in Abrasive Technologies, Shop by Brand
    1. Pages:
    3. 1
    4. ...
    5. 53
    6. 54
    7. 55
    8. 56
    9. 57
    10. 58
    11. 59
    12. 60
     Recent Entries »