Best Door Tools Store

Husqvarna FS4800 D Front Pivot

Free shipping from factory warehouse

Model	FS4800D 14″	FS4800D 18″	FS4800D 26″	FS4800D 30″
Arbor	1 in.	1 in.	1 in.	1 in.
Depth of Cut	4.5″	6.5″	10.5″	12″
Blade Guard Cap.	14″	18″	26″	30″
Blade Shaft Rpm	2,900	2,400	1,800	1,600

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

Power transmission

• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
• Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

Other Features

• Slip-on blade guard comes with auto-latch for easy removal and installation.
• Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Electrohydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator; optional electric clutch – blade drive disengagement system
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.

Professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS4800 D Electric Tracking Front Pivot

Free shipping from factory warehouse

Model	FS4800D 14″	FS4800D 18″	FS4800D 26″	FS4800D 30″
Arbor	1 in.	1 in.	1 in.	Depth of Cut	4.5″	6.5″	10.5″	12″
Blade Guard Cap.	14″	18″	26″	30″
Blade Shaft Rpm	2,900	2,400	1,800	1,600

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

Power transmission.

• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
• Power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class.

Other Features

• Slip-on blade guard comes with auto-latch for easy removal and installation.
• Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Front pivot model has a patent pending electric tracking system, which allows operator to make tracking adjustments with a switch while cutting.
• Electro-hydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator.

Professional and very versatile flat saw for large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS4800 D Rear Pivot

Free shipping from factory warehouse

Rear pivot model offers an electrically controlled hydraulic differential system which locks rear wheels for positive traction to prevent slipping.

Model	FS4800D 14″	FS4800D 18″	FS4800D 26″	FS4800D 30″
Arbor	1 in.	1 in.	1 in.	1 in.
Depth of Cut	4.5″	6.5″	10.5″	12″
Blade Guard Cap.	14″	18″	26″	30″
Blade Shaft Rpm	2,900	2,400	1,800	1,600

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

Power transmission.

• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting with no belts, chains or gears; requires no adjustment.
• Power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class.

Other Features

• Slip-on blade guard comes with auto-latch for easy removal and installation.
• Positive locking detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Rear pivot for repetitive cuts, saw is easier to maneuver
• Electro hydraulic pump raises blade; switch controlled raise/lower on speed control handle; automatic blade depth control switch built into depth indicator depth can be set with auto stop function on depth indicator.

For large and mid-size jobs. It is available in front pivot and rear pivot configurations. A rear pivot saw is recommended when maneuverability is key in road repair and service work. The front pivot version is preferable for normal road sawing operations.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS413 Concrete Saw

Free shipping from factory warehouse

Blade & water tank sold separately

Patented, engine and blade guard mounting system reduces overall vibration at the operator handle.

Blade guard features a precision bearing hinge system reducing wear and noise caused by vibration.

Water spray system allows for easy maintenance and better water flow

Tough, Adjustable Handlebar

• Handles can be easily folded down for transportation and storage
• Optional water tank is available for use when a constant water supply is not available.

Bladeshaft

• Bladeshaft system does not use set screws and allows for easy servicing of sheaves and blade collar.
• Dual arbors allow mounting of blade on either end of blade shaft for right or left side cutting
• Features hard case treatment for strength and rust resistance

IntelliSeal Bladeshaft System

• patented bladeshalft system allow for a minimum of 250 maintenance-free hours and eliminates daily greasing of bearings.
• Frame resists bending & flexing
• Protective cage with integrated lift bale protects engine.

.

Husqvarna FS4800 D 3-Speed Gearbox Front Pivot

Free shipping from factory warehouse

Model	26″	30″	36″
Arbor	1 in.	1 in.	1 in.
Depth of Cut	10.5″	12″	15″
Blade Guard Cap.	26″	30″	36″
Blade Shaft RPM	3,100, 2,180, 1,870	2,600, 1,800, 1,570	2,260, 1,580, 1,360

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

3-Speed Gearbox

• Three-speed gearbox utilizes the patented power transmission system which has a right angle gearbox configuration.
• Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

Other Features

• Gear selections for different blade diameters are clearly identified with numbers and colors.
• Positive locking-detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting – with no belts, chains or gears; requires no adjustment.
• Front pivot model has a patent pending electric tracking system option, which allows operator to make tracking adjustments with a switch while cutting.

Gearbox shift lever is used to change output speed of the engine gearbox. Three speeds and two neutral positions are standard. Gearbox shift lever positions (1, 2 and 3) are color coded to match the blade diameter and blade-shaft rpm decal located on the control panel.
Power transmission system has a right angle gearbox configuration.

.

Husqvarna FS4800 D 3-Speed Gearbox Rear Pivot

Free shipping from factory warehouse

Rear pivot model offers an electrically controlled hydraulic differential system which locks rear wheels for positive traction to prevent slipping.

Model	FS4800D-3 26″	FS4800D-3 30″	FS4800D-3 36″
Arbor	1 in.	1 in.	1 in.
Depth of Cut	10.5″	12″	15″
Blade Guard Cap.	26″	30″	36″
Blade Shaft RPM	3,100, 2,180, 1,870	2,600, 1,800, 1,570	2,260, 1,580, 1,360

Engine

• Yanmar 48 hp 4-cylinder, liquid-cooled, diesel engine meets current EPA requirements.
• 42 hp at the blade shaft

3-Speed Gearbox

• Three-speed gearbox utilizes the patented power transmission system which has a right angle gearbox configuration.
• Patented power transmission system has a right angle gearbox configuration with 12 V-belts. This transmits more power to the blade shaft than similar models in its class, delivering 42 hp at the blade shaft.

Other Features

• Gear selections for different blade diameters are clearly identified with numbers and colors.
• Positive locking detent for gearbox shift lever eliminates possibility of slipping out of gear.
• Two neutral positions assist in freeing blades stuck in a cut and allows saw operation without the blade rotating.
• The patented IntelliSeal™ blade shaft system allows for a minimum 500-hour service interval, eliminates daily greasing of bearings and also has a quick disconnect blade flange.
• Patent-pending multi-positional handlebars easily adjust to individual operator’s preference which increases operator comfort and reduces operator fatigue.
• Balanced dual motor hydrostatic drive system eliminates surging and lag while cutting – with no belts, chains or gears; requires no adjustment.
• Front pivot model has a patent pending electric tracking system option, which allows operator to make tracking adjustments with a switch while cutting.

Gearbox shift lever is used to change output speed of the engine gearbox. Three speeds and two neutral positions are standard. Gearbox shift lever positions (1, 2 and 3) are color coded to match the blade diameter and blade-shaft rpm decal located on the control panel.
Power transmission system has a right angle gearbox configuration.

.