Category: Concrete & Masonry Tools

9666 Dynapac LF45 11x17in Forward Plate Soil Compactor by Dynapac

9666 Dynapac LF45 11x17in Forward Plate Soil Compactor
Check Price for 9666 Dynapac LF45 11x17in Forward Plate Soil Compactor

Dynapac LF45 11″ x 17″ Forward Plate Soil Compactor

LF45 is a forward vibratory plate compactor suitable for all types of granular soils. It can also be used for block paving applications when equipped with the optional polyurethane plate.

Features

  • For soil applications only
  • Hardox 400 bottom plate
  • Easily detachable handle for easy transport

Vibratory Plate Compactor

  • Engine: Honda GX100
  • Horsepower: 3
  • Fuel Type: Gas
  • Plate Size: 11″ W x 17″ L
  • Amplitude: 0.04″
  • Frequency: 6,000 VPM
  • Centrifugal Force: 1,800 lbs, 8 kN
  • Weight: 88 lbs 41 kg
  • 1 Year Limited Warranty

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9658 Dynapac BV30 Finishing Vibrating Beams by

9658 Dynapac BV30 Finishing Vibrating Beams
Check Price for 9658 Dynapac BV30 Finishing Vibrating Beams

Dynapac BV30 Screed Blades

Floor-finishing with the right tools!

Features

  • Interchangeable bottom plates make this light finishing beam versatile
  • 6 different working widths: 6ft, 8ft, 10ft, 12ft, 14ft, 16ft
    (1.8, 2.4, 3.0, 3.6, 4.8m)
  • Made of non-corrosive aluminum alloy
  • Perfectly balanced to achieve even floors
  • Provide good consolidation of the concrete and an even surface.

.

Posted in Concrete & Masonry Tools, More Concrete & Masonry Tools, Power & Manual Screeds

9659 Dynapac 18in ORKA Floor Saw by Dynapac

9659 Dynapac 18in ORKA Floor Saw
Check Price for 9659 Dynapac 18in ORKA Floor Saw

Dynapac 18″ ORKA Floor Saw

Dynapac floor saws: a compact range covering most common cutting applications.

  • Used in the building industry to cut trenches and make expansion joints, ORKA floor saws are also extensively used in road repair works to cut asphalt stripes.
  • With a decisive edge over other techniques they economically perform a very accurate job
  • A fork-watering device, i.e: constant cooling of the diamond disk on both sides, improved evacuation of dust and waste while in operation.
  • Honda engine with a cyclonic filter improving the engine’s lifetime.
  • Optimal balance of the machine for accurate cutting

Features

  • Combined diameter 14″/18″, 350/450 mm in one machine (suitable for diamond blades up to 18″ 450 mm)
  • Max cutting depth with 18″ blade is 6-5/8″ 175mm
  • Equipped with a 13 hp HONDA GX390 QXC4 engine
  • Reversible handle: reduced height and width for transportation
  • “V-poly” belts
  • Fork-watering device
  • Water tank capacity 30 L
  • Weight 216 lbs, 98 kg

.

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Push Walk-Behind Concrete Saws

9660 Dynapac Racoon Flex Shaft Concrete Vibrators by

9660 Dynapac Racoon Flex Shaft Concrete Vibrators
Check Price for 9660 Dynapac Racoon Flex Shaft Concrete Vibrators

Dynapac Racoon Flex Shaft Concrete Vibrators, Power Units & Heads
A complete vibration system to match any job!.

The new Racoon flex shaft concrete vibrators is a complete vibration system to match any job with interchangeable flexible shafts and poker heads. The quick connection device between the drive unit and the flexible shaft makes it easy and quick for the operator to change shaft. It features a resistant, yet ergonomic, case in polycarbonate with fibre-glass fitted with a built-in handle, thus ensuring sturdiness.

Features & benefits

  • Versatile : interchangeable flexible shafts and poker heads.
  • Performant : 2hp electric drive unit 230 or 115V to be combined with 4 poker heads and 5 flexible shafts.
  • Resistant and ergonomic case with built-in handle.
  • Safe and trouble free operation.

Technical Data

  • RPM 12000
  • Voltage 115V or 230V-1-50/60 Hz
  • Power 2 Hp
  • Drive unit weight 11 lbs (5 kg)
  • Dimensions 14.5″ x 4.9″ x 7.4″ (370 x 125 x 190mm)

Our Tips

  • Permanently lubricated twin bearings. Only the shaft needs to be lubricated after 75 hours.
  • Ordinary tools can be used to change tubes and end caps, and to replace brushes on the electric motor (brushes to be changed every 250 hours).
  • One drive unit fits all combination.
  • Adapters available to fit competitors models.

.

Posted in Concrete & Masonry Tools, Concrete Vibrators

9661 Dynapac BG Power Trowels by

9661 Dynapac BG Power Trowels
Check Price for 9661 Dynapac BG Power Trowels

Dynapac BG Power Trowels
Facility to operate our machines is also one of our key concerns, this is why ergonomics and safety are always maximized when designing our trowels: less strain on the machine’s operator and the highest safety standards also contribute to maximizing output when working with a Dynapac BG trowel.

Features & benefits

  • Designed for maximum ergonomy and capacity.
  • Long and foldable galvanized handle and wheels
  • Two-stage helical gear giving the gear box 100% efficiency.
  • Safety handle stopping the engine within a quarter-turn when the handle is released

Technical Data

  • BG-24″ blade diameter, Honda GX120, 4 Hp
  • BG-36″ blade diameter, Honda GX160, 5-1/2 Hp
  • BG-46″ blade diameter, Honda GX340, 11 Hp

Our Tips

  • The first pass (rough trowelling) with smoothing disk can take place as soon as the concrete can be walked on.
  • The second pass (fine trowelling) with multi-purpose blades can take place as soon as you can press the concrete with the hand without collecting concrete on it.
  • Average wear of the multi-purpose blades with standard concrete mix: 1500 sqm.
  • All our blades are reversible !

.

Posted in Concrete & Masonry Tools, More Concrete & Masonry Tools, Power Trowels

9662 Dynapac LT Petrol Rammers by

9662 Dynapac LT Petrol Rammers
Check Price for 9662 Dynapac LT Petrol Rammers

Dynapac Rammers
Dynapac rammers are suitable for applications on both granular and cohesive soils, where strict requirements are imposed for compaction in confined areas, trenches and repair work.

Features & benefits

  • Dynapac rammers are suitable for compacting soil in trenches, around poles and in restricted spaces. It has been designed to comply with contractors’ highest demands in terms of efficiency, simplicity and operators comfort. To ensure easy handling and optimum performance
  • Dynapac engineers have developed the B.E.S.T patented multifunction fuel tank:
  • Breather shut off
  • Electrical shut off
  • Shut off fuel
  • Throttle control in three fixed positions. Stop, idle and run.

Made to cope with tough conditions

  • Through the use of a cyclone pre-filter and a high capacity main airfilter, together with the built-in fuelfilter, the Dynapac rammers are made to cope with toughest of conditions. In other words it is suited in every corner of the world where a demand for hard hitting compaction is needed.

Serviceability and daily maintenance

  • The LT rammer series features extremely easy access to all daily maintenance points. Simple solutions like changing the air filter without use of tools are much appreciated by the user.

Technical Data

  • Honda GX engine provides trouble free compacting.
  • LT5000, 3 hp, 9″x13″ shoe size, Compaction Frequency, 12 Hz, Amplitude, mm 50-60, Impact force, 10 kN/blow
  • LT6000 3 hp, 11″x13″ shoe size, Compaction Frequency, 12 Hz, Amplitude, mm 65-75, Impact force, 14.8 kN/blow
  • LT7000 4 hp, 11″x13″ shoe size, Compaction Frequency, 12 Hz, Amplitude, mm 70-80, Impact force, 18.6 kN/blow

Competence

  • Better compaction leads to better structures. When you turn to Dynapac you get more than 70 years of ground experience built into each product and the core of this research is undertaken by our International Centre in Sweden. Everyone gains from better compaction, it extends the service life of a structure and it reduces maintenance cost. The result is safer structures and longer maintenance intervals, which means less environmental impact.

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Rammers

9663 Dynapac LT800-11 Diesel Rammer by Dynapac

9663 Dynapac LT800-11 Diesel Rammer
Check Price for 9663 Dynapac LT800-11 Diesel Rammer

Dynapac LT800-11 Diesel Rammer

The LT800 diesel rammer is suitable for compacting soil in trenches, around poles and in restricted spaces. It has been designed to comply with contractors’ highest demands in terms of efficiency, simplicity and operators comfort.

  • Hatz 1B20, 4.6 HP Diesel
  • LT800 4.6 hp, 9″x13″ shoe size, Impact force, 21.4 kN/blow
  • Weight 185 lbs, 84 kg

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Rammers

9664 Dynapac LF15 Forward Asphalt Plate Compactor by Dynapac

9664 Dynapac LF15 Forward Asphalt Plate Compactor
Check Price for 9664 Dynapac LF15 Forward Asphalt Plate Compactor

Dynapac LF15 Forward Asphalt Plate Compactor

The LF15 forward moving vibrating plate is designed for contractors who have high demands for flexibility and versatility in compacting asphalt compounds. This model is suitable for many applications that require especially high precision. A suitable complement to a large asphalt compactor.

Features

  • High capacity water tank 3-1/2 Gals (13,5 L) with large filler cap for easy cleaning and access
  • Protective frame with built-in lifting eyelet
  • Optional transport wheels for easy job transportation
  • Delta shaped Hardox 400 bottom plate
  • Long service intervals due to oil lubricated eccentric element
  • Stainless steel sprinkler system
  • Special plate edges reduce asphalt tearing.

Vibratory Plate Compactor

  • Honda GX120, 4 HP
  • Centrifugal force, 2,250 lbs, 10 kN
  • Working speed, 28 m/min
  • Plate width 20-1/2″, (520mm)
  • Dimension 41″ X 47″ X 18″
  • Weight 165 lbs, 700 kg

.

Posted in Compaction Equipment, Concrete & Masonry Tools, Single Direction Plate Compactors

9633 Pearl Abrasive Water Kit for Circular Saws by PEARL

9633 Pearl Abrasive Water Kit for Circular Saws
Check Price for 9633 Pearl Abrasive Water Kit for Circular Saws

Pearl Abrasive Water Kit for Circular Saws

Includes: Ground Fault Circuit Interrupter, ball valve diverter assembly, Quick Release Coupler with 2 Rubber Gaskets, Flexible Plastic Tube, Plastic Nut, Hose Clamps.

  • Reduces the operator’s levels of dangerous, cancer causing airborne pathogens, dust and fatigue!
  • Finger tip controls allow the minimal use of water, to help control the hazards to the environment created by dry cutting.
  • Cooling and lubricating with water will make your expensive diamond blades last up to 50% longer.
  • Cooling the blade also helps to cool the motor, thus extending the life of your saw.
  • Kit includes a UL Listed Ground Fault Circuit Interrupter to eliminate shock hazard.
  • Blade Roller & Saw not included

.

Posted in Concrete & Masonry Saws, Concrete & Masonry Tools, Concrete Saw Accessories

9657 Dynapac BV30 Vibrating Screed by Dynapac

9657 Dynapac BV30 Vibrating Screed
Check Price for 9657 Dynapac BV30 Vibrating Screed

Dynapac BV30 Screed

Floor-finishing with the right tools!

Features

  • Interchangeable bottom plates make this light finishing beam versatile
  • 6 different working widths: 6ft, 8ft, 10ft, 12ft, 14ft, 16ft
    (1.8, 2.4, 3.0, 3.6, 4.8m)
  • Can be equipped with 2 drive units upon request) .
  • Simple operation thanks to an adjustable in-height twin handle,
  • Foldable de-vibrated handle for easy transport.
  • Adjustable centrifugal force for operation on different types of concrete
  • Variable speed
  • Air-cooled, 4 cycle, single cylinder, gas engine

Technical Data

  • Vibrating unit Honda OHC GX35, 4-stroke engine
  • Power: 1,2 kW (1,6 hp) @ 7000rpm

.

Posted in Concrete & Masonry Tools, More Concrete & Masonry Tools, Power & Manual Screeds
  1. Pages:
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. ...
  11. 38
 Recent Entries »