9368 Wacker PSA 2 500 2in Submersible Pump 110V Automatic Switch by Wacker Corporation
Wacker PSA 2 500 2in Submersible Pump 110V/60Hz
Automatic Switch
Lightweight, portable, single phase submersible pumps are designed to handle water and solids.
Built for the demands of construction, mining, municipality and farm applications.
Features and benefits
- Lightweight, compact design for easy transport and positioning of pump.
- Built-in thermal protection prevents motor damage due to impeller blockage, reducing service repairs.
- Heavy-duty power cord with strain relief resists pullout and abrasion reducing costly repairs.
- Insulation on all conductors of the power cable are protected by a water block system to prevent wicking of water into the motor.
- Silicon carbide faced double mechanical seals run in an isolated oil-filled cavity, allowing for seal lubrication, cooling and overall motor protection.
- Preliminary v-ring or lip seal (depending on model) shields the mechanical seal from abrasive wear due to suspended debris in pumping fluid.
- Semi-vortex impeller allows for optimum wear resistance.
Technical features
Description | Metric | Inch | ||
Discharge diameter | 50 | mm | 2 | in |
Length x width x height | 220 x 185 x 305 | mm | 8.7 x 7.3 x 12 | in |
Operating weight | 10,0 | kg | 22 | lb |
Max. head | 12 | m | 39.5 | ft |
Max. discharge | 236 | l/min | 62.4 | US gpm |
Max. pressure | 1,17 | bar | 17 | psi |
Solid size capacity | 6,0 | mm | 0.2 | in |
Motor type | Single phase/60 Hz | |||
Voltage | 110 | V | 110 | V |
Current (full load/start @ 110V) | 6,1/12,5 | A | 6.1/12.5 | A |
Speed | 3.270 | 1/min | 3,270 | rpm |
Max. power output | 0,48 | kW | 2/3 | hp |
Cable length | 10 | m | 32 | ft |
Cable size | 1,31 | mm2 | 16 | AWG |
Impeller material | Urethane rubber | |||
Impeller type | Semi-vortex |
.