Category: Tile & Stone Tools

9503 Plasplugs Wall Wet Porcelain Tile Drill System by

9503 Plasplugs Wall Wet Porcelain Tile Drill System
Check Price for 9503 Plasplugs Wall Wet Porcelain Tile Drill System

Plasplugs Wet Porcelain Tile Drill System for Wall
Use Wet to keep drill bit cool.

  • Water reservoir tank & drill guide included.

  • A constant flow of water to the drilling tip is achieved using the water tank, which feeds water through the center of the drill keeping it cool.
  • Up to 25 holes in hard porcelain tile.
  • We tested this bit in hard porcelain and the results speak for themselves!
  • Unsatisfactory results with Plasplugs Drill bits mostly come from an excessive cutting speed.
  • In some materials, he/she can also rely on the noise:
  • if you hear “bzzzzz” it’s OK.
  • if you hear “crrrrrrr” there is something wrong.

  • Segmented design works better and lasts longer.

.

Posted in Diamond Hole Saws & Core Bits, Drilling Tile & Stone, Tile & Stone Tools

9504 Plasplugs Floor Wet Porcelain Tile Drill System by

9504 Plasplugs Floor Wet Porcelain Tile Drill System
Check Price for 9504 Plasplugs Floor Wet Porcelain Tile Drill System

Plasplugs Wet Porcelain Tile Drill System for Floor
Use Wet to keep drill bit cool.

  • Water reservoir tank & drill guide included.

  • A constant flow of water to the drilling tip is achieved using the water tank, which feeds water through the center of the drill keeping it cool.
  • Up to 25 holes in hard porcelain tile.
  • We tested this bit in hard porcelain and the results speak for themselves!
  • Unsatisfactory results with Plasplugs Drill bits mostly come from an excessive cutting speed.
  • In some materials, he/she can also rely on the noise:
  • if you hear “bzzzzz” it’s OK.
  • if you hear “crrrrrrr” there is something wrong.

  • Segmented design works better and lasts longer.

.

Posted in Diamond Hole Saws & Core Bits, Drilling Tile & Stone, Tile & Stone Tools

9502 Plasplugs Master Tiler DWW150 6in Tile Saw by Plasplugs

9502 Plasplugs Master Tiler DWW150 6in Tile Saw
Check Price for 9502 Plasplugs Master Tiler DWW150 6in Tile Saw

Plasplugs Contractors Plus DWW150 6″ Tile Saw

Unique 3/4 HP Hi-Torque geared motor

General Information

The DWW150 saw will help you cut your way to a new bathroom or kitchen

  • Aluminum Die-Cast cutting table with water recovery system.

  • Cut’s tile up to 1″ thick.

  • Only weighs 19 lbs.
  • Thermal overload switch
  • Cuts Porcelain, ceramic, glass, tiles, marble, and other materials
  • Flip-up guide plate for 22.5º & 45º miters
  • Carry handle
  • Tile Saw features a flat, open-table design as well as a large work surface for high visibility.
  • Quick release click-grip caliper locks
  • Cutting guide can be use on left or right side of blade.
  • Powerful fan motor prevents overheating.
  • Product Dimensions: 20 x 18.2 x 7 inches.
  • 6″ diamond blade, 7/8″ arbor.

.

Posted in 13in to 19in Tile Saws, Tile & Stone Tools, Tile Saws & Stone Saws

9487 Rubi Gold Titanium Scoring Wheels for TS/TR by

9487 Rubi Gold Titanium Scoring Wheels for TS/TR
Check Price for 9487 Rubi Gold Titanium Scoring Wheels for TS/TR

Replacement Titanium Scoring wheels for TS and TR series Rubi Tile cutters

  • Titanium coated Tungsten carbide scoring wheels.
  • Large Diameter wheels will score the tile deeper.

  • 10mm for porcelain
  • 18mm For granulated and difficult to cut porcelain tiles.
  • 22mm For sharp cuttings in hard ceramics.

  • Patented model with new high technology RUBI® alloy; maximum precision and resistant to wear.
  • Greater resistance to wear, triple durability.
  • For hard to cut porcelain tile.

.

Posted in Cutting Wheels & Parts, Tile & Stone Tools, Tile Cutters & Nippers

9442 Pearl CX10 Wet Tile Saw & Stand by

9442 Pearl CX10 Wet Tile Saw & Stand
Check Price for 9442 Pearl CX10 Wet Tile Saw & Stand

Pearl CX10 10″ Wet Tile Saw & Stand

New! COACTION TECHNOLOGY
Table travels 50% less than conventional saws.

  • The cutting is done over pan & drip tray containing the water.
  • The Cutting Head and Table can travel in opposite directions simultaneously, allowing for big cuts
  • Increased accuracy
  • Able to work in smaller places
  • Tracking system 8 sealed ball roller bearings and stainless steel rails allow the table to roll smoothly, insuring accurate cuts.
  • Chopping action plunge cut with spring loaded cutting head.
  • Included with saw, rear and side drip trays to catch water run of on big tiles.
  • 10″ High performance diamond blade included.
  • Folding stand included.
  • Weight only 60 lbs.
  • Does not fit 6″ or 10″ profile wheels.
  • 10″ DTLHPXL Blade, Drip trays, 45°/90° Rip Guide, Water Tray, Multiple Wrench, Water Pump and Miter Block.

.

Posted in 20in to 25in Tile Saws, Tile & Stone Tools, Tile Saws & Stone Saws

9394 Tajima SCRAPE-RITE Heavy-Duty Scrapers by

9394 Tajima SCRAPE-RITE Heavy-Duty Scrapers
Check Price for 9394 Tajima SCRAPE-RITE Heavy-Duty Scrapers

Tajima SCRAPE-RITE Series Heavy-Duty Scrapers

  • Reversible blade scrapers for wallpaper, vinyl, veneer, floor coverings and more.
  • Reversible Endura blade for razor sharp or standard scraping edge.
  • Die-cast head , heavy duty reinforced shaft and stainless steel end cap.
  • Strong twin-bolt blade locking with spring-loaded clamp.
  • Angled head/blade to generate fast and efficient scraping action.
  • Elastomer coated sure-grip handle.
  • Hi-impact reinforced shaft with stainless steel end“cap for hammering.
  • Includes 3 Endura 3/4” blades packaged in protective hard packs.
  • Tajima Endura blades offer the hardest, sharpest cutting edge possible.

.

Posted in More Tile & Stone Tools, Tile & Stone Tools, Tile Removal (Scalers, Scrapers)

9405 Flex BD 05 Flex Slimline Drill Stand by Flex NA

9405 Flex BD 05 Flex Slimline Drill Stand
Check Price for 9405 Flex BD 05 Flex Slimline Drill Stand

BD 05 Flex Slimline Drill Stand With Triple Lateral Support

  • Buy BD 05 Flex Slimline Drill Stand With Triple Lateral Support and Save
  • The long-footed base plate allows it to be used even in the most narrow environments.
  • By rotating the feed column it is also possible to drill in corners and recesses, for example, the steps of stairways, kitchen countertop slabs, parapets, and gravestones.
  • Drill stroke up to 12”
  • Water collector, Three vacuum suction cups & side support included.
  • Suitable for all drilling applications into natural stone.
  • Examples include drilling wall anchor holes in natural stone tiles (to hang light fixtures, bathroom accessories, mirrors or pictures), mounting name plates on natural stone, and drilling small conduits through natural stone for electrical cables.
  • Drill Stand is stable, even for horizontal drilling on all smooth and polished surfaces.

Pick up water even on stairs

  • Fasten the water collector with suction cup up to approx. 2” in drilling position, position feed column with drill bit over the water collector, extract water.

.

Posted in Drilling Tile & Stone, Guides & Accessories, Tile & Stone Tools

9407 Flex PLW 903 ST Air Wet Polisher by Flex NA

9407 Flex PLW 903 ST Air Wet Polisher
Check Price for 9407 Flex PLW 903 ST Air Wet Polisher

Flex PLW 903 ST High-performance Pneumatic Wet Stone Grinder

  • Rugged and durable 4-1/2” Pneumatic WET Stone Polisher used primarily for polishing of stone surfaces and edges.
  • Lightweight, powerful, and reliable ideally suited for continuous operation.
  • Air supply and exhaust are combined in one slender wrap hose.

  • The exhaust is blown out to the back, away from the user and the workpiece.
  • Specially designed for stationary polishing environments.
  • It has a centrally fed water distribution system that provides the best finishes possible.
  • Spindle 5/8” – 11
  • Air Inlet 1/4” Npt
  • Stable handle with insulating powder coating
  • Hose adapter with Water valve with hose Wrenches

Specifications PLW 903 ST

  • Requirements for this tool are a cast iron 2 stage compressor, a large reservoir, 10 hp for each tool.
  • Air consumption is 30 CFM and required air pressure is 85-90 PSI.
  • Max. disc diameter 4-1/2”
  • Speed, without load 3,200 RPM
  • Air-pressure hose with quick-action coupling 10 mm
  • Weight 4.5 lbs

Advantages At A Glance

  • Central water supply: for wet grinding of granite and marble
  • Quick-action, brass coupling: for 1/2” connector for water hoses
  • Tool fixture: 5/8-11 UNC spindle thread
  • Diecast gear head is high-quality and robust, designed especially for wet stone work
  • Very sleek and versatile plastic housing that insulates against the cold
  • Absolute safety without electrical components
  • Most sparing air pressure consumption

.

Posted in Polishers, Sanders, & Profiling Equipment, Polishing & Profiling Equipment, Tile & Stone Tools

9408 Flex LWW1506VR Profile/Edge Miller by Flex NA

9408 Flex LWW1506VR Profile/Edge Miller
Check Price for 9408 Flex LWW1506VR Profile/Edge Miller

Flex LWW 1506VR Profile/Edge Miller Buy a Flex LWW1506VR Profile/Edge Miller and save

  • Flex LWW1506VR Profile/Edge Miller was $699.99 now only $649.99

    • LWW 1506 VR is the “smaller sibling” of the LWW 2106. The LWW 1506 VR is designed to handle up to 1-1/4” thick slabs for milling and grinding sinks, kitchen tops, counters, and tables.

    Flex LWW 1506 Features:

    • For use on both straight and curved edges
    • Powerful universal variable speed motor
    • Quick release brass water-feed coupling
    • Die-cast aluminum guide carriage with composite roller assembly
    • Ground Fault Circuit Interrupter included
    • Ergonomically designed for user comfort
    • 1/2″ Gas spindle thread

    Technical Information

    • Motor: 120V 50/60 Hz
    • Watts: 1,200
    • Amps: 11.0
    • Variable 2,200 – 6,500 Rpm
    • For Slab Thickness: 3/4″ – 1-1/4″ (20 – 40mm)
    • Weight: 17.9 lbs. (8.1kg)

    Leading Edge Technology

      FLEX offers two powerful and cost-effective edge milling machines. Combined with Wet grinding/ milling bits for granite and marble, these tools enable professionals to create most any desired edge shape.

      The best way to imagine what an edge milling machine does, is to think of it as a “router for natural stones”. The main difference lies in the composite of the bits. In order to work on stone you need diamond bits.

    .

    Posted in Polishers, Sanders, & Profiling Equipment, Polishing & Profiling Equipment, Tile & Stone Tools
    1. Pages:
    3. 1
    4. 2
    5. 3
    6. 4
    7. 5
    8. 6
    9. 7
    10. 8
    11. 9
    12. ...
    13. 49
     Recent Entries »