Category: Tile & Stone Tools

9630 Bucket Mortar Mixer by Bucket Mortar Mixer

9630 Bucket Mortar Mixer
Check Price for 9630 Bucket Mortar Mixer

Bucket Mortar Mixer

Tile setters and stone masons, Fire your hoe and retire your mix box. Bucket Mortar Mixer mixes faster and with much less effort than a mix box or wheelbarrow and hoe. Cost including a drill is less than a mix box and hoe. Easier clean up, Less bulk. In the past it has been difficult to mix dry pack mortar in a bucket.This tool makes short work of it.

  • The Bucket Mortar Mixer mixes all types of mortar and concrete in a 5 gal bucket.
  • Mixes 4 gal of dry pack mortar (deck mud, floor mortar, sand mix) in as little as 30 seconds mixing time!!
  • Auger action moves material from bottom to top and handle allows a stirring motion of the auger.
  • Foam covered steel handle with oil impregnated bronze bearings for maintenance free operation.
  • 1/2″ chuck drill motor required (keyed type recommended).
  • Zinc plated 30″ by 1/2″ shaft.

.

Posted in Grout Mixers, Mixing Paddles, Tile & Stone Tools

9617 Rubi Wall Tile Wedges by

9617 Rubi Wall Tile Wedges
Check Price for 9617 Rubi Wall Tile Wedges

Rubi Wall Tile Wedges

  • 3/16″ (5mm) & 5/16″ (7.5mm) Rubi Plastic Wedges
  • Bags of 500 pcs.
  • If the Wedge bottoms out before opening the joint wide enough, just snip off the end and the wedge will be larger.
  • Ideal for use with wall tiles. Rubi tile wedges allow for excellent finishing with total precision due to the homogeneity of their measurements and the absence of rough edges and small defects.
  • Tile wedges align tiles in vertical installations so the grout lines are even throughout the installation.
  • Works with all sizes of ceramic tile, porcelain, stone, and marble.
  • Perfect for back-splash installations.

.

Posted in More Tile & Stone Tools, Spacers & Wedges, Tile & Stone Tools

9572 Rubi Fluid Mixing Paddles by

9572 Rubi Fluid Mixing Paddles
Check Price for 9572 Rubi Fluid Mixing Paddles

Rubi Fluid and Paint Mixing Paddles

Rubi mixing paddles for use on the electric Rubimix 8,10, and 15 also fits on Perles mixers.
M-14 tread fits electric drills.

  • L-80-R For mixing between 33 to 55 lbs of paint
  • L-100-R For mixing between 33 to 55 lbs of paint
  • L-120-R For mixing in between 33 to 88 lbs of paint

.

Posted in Grout Mixers, Mixing Paddles, Tile & Stone Tools

9573 Rubi Glue & Mortar Mixing Paddles by

9573 Rubi Glue & Mortar Mixing Paddles
Check Price for 9573 Rubi Glue & Mortar Mixing Paddles

Rubi Glue & Mortar Mixing Paddles

Rubi mixing paddles for use on the electric Rubimix 8,10, and 15 also fits on Perles mixers.
M-14 tread fits electric drills.

M-100-R

  • For mixing between 33 to 44 lbs (15-20 Kg) of glue mortar

M-120-R

  • For mixing between 33 to 55 lbs (15-25 Kg) of glue mortar

M-140-R

  • For mixing in between 55 to 88 lbs (25-40 Kg) of glue mortar

M-160-R

  • For mixing in between 66 to 132 lbs (30-60 Kg) of glue mortar

.

Posted in Grout Mixers, Mixing Paddles, Tile & Stone Tools

9563 EdgeRight Wet or Dry Profiler by

9563 EdgeRight Wet or Dry Profiler
Check Price for 9563 EdgeRight Wet or Dry Profiler

Edgeright Dry Profiler

  • Dry 3/8″ fine (200 grit) or coarse and 1/4″ coarse round-over profilers for granite, engineered stone and porcelain.
  • All 7mm radius.
  • Long-life brazed diamond cutting surface.
  • Dry cutting wheel with a 5/8″-11 female
  • Nylon guide slides along the surface to make this tool nearly “Goof-proof”
  • Can be used wet with external water supply
  • Maximum 4500 Rpm recommended
  • Guide Bearing: Bottom: Stainless Steel, top: no-scratch Polymer.
  • Water NOT required. Profiler is channeled for water and can be used wet or dry.

Features

  • Bullnose any size tile or slab.

  • Portable fits most polishers.
  • Industrial strength Stainless Steel withstands job site abuse.
  • No-Scratch top bearing
  • Long-life brazed diamond cutting surface.
  • In conjunction with the EdgeRight® Bullnosing Bench, an operator with little or no fabrication experience can bullnose tile like a PRO!.
Posted in Polishing & Profiling Equipment, Profile & Cup Wheels, Tile & Stone Tools

9550K MK TX-3 Tile Saw & Stand by

9550K MK TX-3 Tile Saw & Stand
Check Price for 9550K MK TX-3 Tile Saw & Stand

The TX3 features a patent pending misting system that keeps the dust down, allowing for indoor applications. The 55 psi misting pump generates an extra fine water spray through two nozzles to keep the blade cool during cutting. The newly designed Air Flow Module protects the motor from mist during operation. The innovative maintenance free guide bar system eliminates the need for regular lubrication. The tilting head allows 22.5 and 45 degree miter cuts.

  • Free shipping from MK factory warehouse to lower 48 states
  • We will charge applicable sales tax, for a factory direct drop-ship of the MK-TX3 Tile Wet Saw In the state of California
  • Patent pending misting system significantly reduces amount of dust during cutting.
  • Free folding stand a $109.00 value.
  • Built-in fully adjustable miter system for precise 45º angle cuts
  • Weighs only 85 lbs
  • Depth of cut(10″ Blade): 3-1/2″
  • Arbor Size: 1″ (26mm)
  • Dimensions: LxWxH (inches) 44″ x 25″ x 20″
  • 55 psi pump delivers an extra fine water spray to both sides of the blade for cooling and dust control
  • Variable height cutting head allows for plunge cutting and use of blades smaller than 10″ in diameter
  • Maintenance free guide bar system eliminates the need for regular lubrication
  • Blade shaft lock for easy blade removal
  • 10″ wet cutting continuous rim porcelain blade included
  • One-year limited warranty
  • Important Notice: Standard 5/8” Arbor Tile Blades will NOT Fit the TX-3.

.

Posted in 20in to 25in Tile Saws, Tile & Stone Tools, Tile Saws & Stone Saws
  1. Pages:
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. ...
  11. 49
 Recent Entries »