Category: Tile Saws & Stone Saws

9543 CX10 Pearl 10in Wet Tile Saw by PEARL

9543 CX10 Pearl 10in Wet Tile Saw
Check Price for 9543 CX10 Pearl 10in Wet Tile Saw

Pearl CX10 10″ Wet Tile Saw

New! COACTION TECHNOLOGY
Table travels 50% less than conventional saws.

  • The cutting is done over pan & drip tray containing the water.
  • The Cutting Head and Table can travel in opposite directions simultaneously, allowing for big cuts
  • Increased accuracy
  • Able to work in smaller places
  • Tracking system 8 sealed ball roller bearings and stainless steel rails allow the table to roll smoothly, insuring accurate cuts.
  • Chopping action plunge cut with spring loaded cutting head.
  • Included with saw, rear and side drip trays to catch water run of on big tiles.
  • 10″ High performance diamond blade included.
  • Weight only 60 lbs.
  • Does not fit 6″ or 10″ profile wheels.
  • Inlcudes: 10″ DTLHPXL Blade, Drip trays, 45°/90° Rip Guide, Water Tray, Multiple Wrench, Water Pump and Miter Block.

.

Posted in 20in to 25in Tile Saws, Tile & Stone Tools, Tile Saws & Stone Saws

9502 Plasplugs Master Tiler DWW150 6in Tile Saw by Plasplugs

9502 Plasplugs Master Tiler DWW150 6in Tile Saw
Check Price for 9502 Plasplugs Master Tiler DWW150 6in Tile Saw

Plasplugs Contractors Plus DWW150 6″ Tile Saw

Unique 3/4 HP Hi-Torque geared motor

General Information

The DWW150 saw will help you cut your way to a new bathroom or kitchen

  • Aluminum Die-Cast cutting table with water recovery system.

  • Cut’s tile up to 1″ thick.

  • Only weighs 19 lbs.
  • Thermal overload switch
  • Cuts Porcelain, ceramic, glass, tiles, marble, and other materials
  • Flip-up guide plate for 22.5º & 45º miters
  • Carry handle
  • Tile Saw features a flat, open-table design as well as a large work surface for high visibility.
  • Quick release click-grip caliper locks
  • Cutting guide can be use on left or right side of blade.
  • Powerful fan motor prevents overheating.
  • Product Dimensions: 20 x 18.2 x 7 inches.
  • 6″ diamond blade, 7/8″ arbor.

.

Posted in 13in to 19in Tile Saws, Tile & Stone Tools, Tile Saws & Stone Saws

9442 Pearl CX10 Wet Tile Saw & Stand by

9442 Pearl CX10 Wet Tile Saw & Stand
Check Price for 9442 Pearl CX10 Wet Tile Saw & Stand

Pearl CX10 10″ Wet Tile Saw & Stand

New! COACTION TECHNOLOGY
Table travels 50% less than conventional saws.

  • The cutting is done over pan & drip tray containing the water.
  • The Cutting Head and Table can travel in opposite directions simultaneously, allowing for big cuts
  • Increased accuracy
  • Able to work in smaller places
  • Tracking system 8 sealed ball roller bearings and stainless steel rails allow the table to roll smoothly, insuring accurate cuts.
  • Chopping action plunge cut with spring loaded cutting head.
  • Included with saw, rear and side drip trays to catch water run of on big tiles.
  • 10″ High performance diamond blade included.
  • Folding stand included.
  • Weight only 60 lbs.
  • Does not fit 6″ or 10″ profile wheels.
  • 10″ DTLHPXL Blade, Drip trays, 45°/90° Rip Guide, Water Tray, Multiple Wrench, Water Pump and Miter Block.

.

Posted in 20in to 25in Tile Saws, Tile & Stone Tools, Tile Saws & Stone Saws

8287 MK Wet Cutting Rail Saw by

8287 MK Wet Cutting Rail Saw
Check Price for 8287 MK Wet Cutting Rail Saw

MK Wet Cutting Rail Saw

Features

  • 130″ length of cut* – 13 Amp direct-drive motor
  • Tilting head for precise 45º miter cuts up to 2-1/4″ deep
  • Adjustable height plunge-cutting head
  • Light weight precision extruded aluminum rails provide accurate and even tracking during all cutting operations
  • Rails have replaceable slip-on pads to protect material surface from scratches
  • Precision, maintenance-free bearings provide smooth and reliable tracking of the cutting head
  • Replaceable dust filter
  • Valve controlled water feed
  • 12″ MK-62G wet cutting diamond blade included
  • 72″ 115V standard U-ground electrical cord and GFCI
  • Saw comes complete with two sets of 72″ rail, rail connector plate, 12″ blade capacity cutting head, two hold-down clamps and standard garden hose water connector
  • Additional rails for extending cutting capacity sold separately
  • One-year limited warranty

* Saw shown with 72″ rail. Second rail set included with saw extends cutting length to 130″

Included with MK Rail Saw: Cutting head, 2 sets 72” rails, 4 parallel spreader brackets, 1 rail connector plate, 2 hold down clamps, 12” MK-62G diamond blade, Water pump

.

Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws

7913 Rubi DX-350 Rail Saw by

7913 Rubi DX-350 Rail Saw
Check Price for 7913 Rubi DX-350 Rail Saw

DIAMANT DX-350 Series

For ceramic tiles and all types of building materials such as brick, facebrick, fire brick, etc.

  • Powerful Belt Driven 110 Volts or 220 Volts, single phase motor
  • With thermal and overload security switches.
  • Water pump with control valve for cooling of the diamond blade.
  • 20 Amps circuit breaker required.
  • Rail saw able to plunge cut!
  • 14″ blade diameter (blade not included)
  • Max cutting height up to 5″ (14″ blade)
  • Motor assembly mounted on sliding bearings.
  • Vertically adjustable and foldable mobile head for miter cuts.
  • With guide for repetitive cuts and fold-away accessory for repetitive miter cuts.
  • Electric cable: 4.9 ft. (1,5 m.)

Cutting Capacity

  • DX-350 32″ using plunge cutting feature.
  • DX-350L 49″ using plunge cutting feature.

  • Free 10 gauge 25ft extension cord with purchase of a Rubi DX-350, 120 Volt model only.
  • Material lock down bar included on DX350L only

.

Posted in 34in to 10 ft Stone Saws, Tile & Stone Tools, Tile Saws & Stone Saws
  1. Pages:
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. ...
  11. 15
 Recent Entries »