Tag Archives: Imer

7699 Imer Optional Vibrating Screen by Imer

7699 Imer Optional Vibrating Screen
Check Price for 7699 Imer Optional Vibrating Screen

Imer Optional Vibrating Screen

  • Used to screen loose materials which may contain rocks, stones and debris larger than 5/16″
  • The optional vibrating screen is needed when using your own loose material.
  • This screen helps prevent large debris and stones from entering into the stator and screw which will cause a jamb.
  • The vibrator will allow for stones up to 1/4″ in size.
  • If you are using bagged, pre-blended material then this option is not necessary.
  • The unit plugs right into the alloted outlet for this vibrator.
  • It is also controlled right on the panel with an on/off switch.

.

7695 Imer Small 50 Pumping, Spraying & Mixing Machines by Imer

7695 Imer Small 50 Pumping, Spraying & Mixing Machines
Check Price for 7695 Imer Small 50 Pumping, Spraying & Mixing Machines

Imer Small 50 Multipurpose Pumping, Spraying Mixing Machines

  • Free shipping from IMER factory warehouse
  • Use with all types of finish coatings. Quickly and easily apply materials such as plasters, mortars, stucco (cement and synthetic based) fire proofing, sound proofing and paint. Pump grout to fill blocks, metal door bucks, self leveling materials, epoxy, almost any material with aggregate no bigger than 1/4″.

    The pump is controlled by the operator either with the 5 volt remote start/stop or, when used with the optional diaphragm compressor, is controlled with the open and closing of the valve at the gun. A rheostat controls the motor RPM which means that you have total control of the flow to match with the material being applied. All of the operation is controlled by the panel which can detect the wrong voltage and shut down as a safety. The unit will sense a jamb and cut the power to the pump. Thermal overloads are in place on the 100% duty cycle motor. This means that the motor can run all day, every day. The control panel will sense an overload before the thermal protection on the motor. This is just the level of how safe, secure and sophisticated this machine is.

    The optional compressor is needed when used for spraying applications. The oil-less, continuous flow, low PSI high CFM compressor is the lungs of the unit. The pumping action is all on the operator. With the air valve closed the compressor senses back pressure and turns off the compressor and the pump motor. When the valve is re-opened the compressor and the pump kick on again to start where you left off.

    There are 2 different nozzles for spraying. One is for heavy materials that needs to be built up such as fire proofing materials and mortars. The other nozzle is used for spraying of thinner coats such as acrylic stucco and coatings. This nozzle comes with different orifice sizes and when used without the compressor, makes a great tool for pointing, filling in cracks and joints in between stone walls.

    Small 50 Features.

    • Stainless steel hopper, Stator and screw, Electric 5 volt remote with 53′ of cable, Provision for pneumatic control, Provision for vibrating screen, Pressure meter unit, Accessory box (cleaning tool, clean-out foam ball, tips), 1 gun of your choice
    • Hooper capacity 12.5 Gallons
    • Load height 25″.
    • 1-3/4 hp., 18 Amp 110 Volts motor.
    • Stator screw RPM controlled by variable rheostat 8-140 RPM.
    • Maximum pumping distance with 3/4″ hose 50ft. with 1″ hose 85 ft.
    • Discharge head 50-60 ft. vertical lift.
    • Weight 150lbs.
    • Easy to use, easy to clean, it’s a money making machine!
    • An on board computer balances the spray rate with the pumping volume, this prevents clogging, an error message followed by a number will display to help you with the troubleshooting
      Model IMER Small 50
      Hopper Cap. 12.5 gal.
      Loading Height 25″
      Motor 1.75 hp
      Weight 150 lbs
      Shipping FREE Freight Truck

    .

    6575 IMER Combicut 3000 Stone Saw by Imer

    6575 IMER Combicut 3000 Stone Saw
    Check Price for 6575 IMER Combicut 3000 Stone Saw

    IMER Combicut 3000 Stone Saw

    • The 4 hp 220v 20 amp single phase electrical motor, combined with the serpentine belt reduction system delivers plenty of cutting power.
    • Two high quality full size slab clamps to ensure the slab is locked down tight.
    • When cutting full-size slabs the protractor is just not enough to accurately position the stone so the COMBI 3000 has an additional fence system that runs the length of the saw that is fully adjustable and locks in place quickly and accurately.
    • The travel bar is built like a suspension bridge, with pre-tensioned bars anchored within it providing great reliability and accuracy, cut within a 1/32″ over 10ft.
    • The saw head also has the ability to chop up and down, plunge cuts up to 4 3/4″ are possible.
    • The laser guide is easy to use, just mark the line of your cut on the slab, line it up with the laser, clamp it down and go!
    • A computer for automated current control ensures that the speed of cut and motor amperage draw are always at optimal levels, the gear drive advancement system is the most reliable made, fast, accurate and chip free cuts are automatic, pass after pass.
    • Tilting to 45 degrees is easy, simply feather the hydraulic control lever and the saw gently rotates and to return the saw to 90 degrees just pump the hand lever 4 or 5 times.

    IMER’S MESSAGE
    “IMER’S COMBI 3000 is an affordable alternative to large stationary bridge saws which require a lengthy set-up procedure and cost thousands and thousands more than the COMBI 3000. It’s easy to set up, simple to operate, yet just as accurate and smooth cutting as the more complicated stationary bridge saws. Built for the start-up shop, or full size shop needing on site fabrication and a versatile complement to their existing shop saw, the COMBI 3000 is the perfect sawing system.”
    Mace T. Coleman Jr.
    President IMER U.S.A.

    .

    6525 IMER 250 TD10 Paver Saw by Imer

    6525 IMER 250 TD10 Paver Saw
    Check Price for 6525 IMER 250 TD10 Paver Saw

    Imer 250 The Touchdown 10

      Accuracy

    • The protractor is a full sized stainless steel constructed guide, the cam actuated locking mechanism keeps the protractor in place at all times.
    • Versatility

    • Plunge cuts are smooth and precise as the cutting head pivots on sealed roller bearings.
    • Reliability

    • The serpentine belt drive is reliable and maintenance free.
    • Motor

    • Patented 1.5 hp, 110 Volts electric motor designed to give tons of cutting torque to the blade.
    • Blade rotation 2800 Rpm
    • Toughness

    • The cutting table is strong and straight…making accurate cuts pass after pass!
    • Versatility

    • The single arm motor support allows the passage of large irregular pieces.
    • Free stand included. Very light & stable with rubber feet for better traction on floors.
    • Free shipping from Imer’s factory warehouse
    • Imer’s message
      “Win big, the Touchdown 10″ cuts it all perfectly! Marble, Granite, Tile, Pavers, brink n’ block- cut them all accurately and fast, day after day! The cutting tray is stable and strong, load it up with the heaviest materials, no problem.”
      Mace T. Coleman Jr.
      President IMER U.S.A.

      .

    6571 Imer Masonry 900 Stone & Precast Saw by Imer

    6571 Imer Masonry 900 Stone & Precast Saw
    Check Price for 6571 Imer Masonry 900 Stone & Precast Saw

    Imer Masonry 900 Stone & Precast Saw

    Power

    • The 10 hp 3ø Phase, gear drive motor has the necessary torque required to cut through the toughest stones.
    • Will run from 380v to 460v 3ø Phase current.
    • Max cutting length 26″
    • Blade rotation is 910 Rpm

    Accuracy

    • The cutting tray system is 1/4″ thick high grade steel and includes a progressive crank feed system… cuts are made safely and accurately.

    Versatility

    • Plunge cuts are smooth and precise as the cutting head pivots on a case harden axle.

    Quality

    • The box steel frame is very rigid yet light for a saw of this size and its proven design techniques combined with high quality steel makes for one powerful and buffed beast!

    Portability

    • The wheel kit and the well engineered balance of the saw allow it to be rolled around by one person and has lift slots for easy handling by a forklift.

    Free

    • Free shipping from Imer warehouse, to lower 48 states
    • Free general purpose 36″ diamond blade (Reg. $999), water pump, and protractor included
    • Imer’s Message
      The Masonry 900 is made to cut through large field and quarry stone. It also has the ability to work with all types of precast products. With a 10 hp gear drive motor cuts up to 15″ depth are no problem. Load up the 900 with stone and precast pieces weighing hundreds of pounds… this saw can take it!
      Mace T. Coleman Jr.
      President IMER U.S.A.

    .

    5832 IMER Mini-Mix 60 Mixer by Imer

    5832 IMER Mini-Mix 60 Mixer
    Check Price for 5832 IMER Mini-Mix 60 Mixer

    IMER Mini-Mix 60 Mixer

    • Free 2 buckets & 2 mixing paddles included.
    • Free shipping from IMER factory warehouse.
    • Truly versatile mixing machine.
    • Quickly and thoroughly mix mortar, stucco, thin set, dry pack mortar, epoxy and plaster.
    • Not recommended for concrete.
    • While one batch is being mixed, the other is being applied.
    • Bucket capacity 14 gal
    • Batch output: 12 gal / 60 lb. bag
    • Drum diameter 24″, blade speed 55 RPM.
    • Machine weight 64 lbs.
    • 1/2 hp, 115 Volts direct drive motor and gearbox assembly is very quiet, and very powerful.
    • Operate the Mini-Mix anywhere with no complaints
    • Dimensions 25″L x 23″W x 31″H.
    • Project-Mixing Imer Product Application
      Mixing Concrete
      (small batch-250lbs or less)
      Minuteman or Wheelman
      Mixing Concrete (large batch 400-800lbs) Workman 250 or 350
      Stucco (small batch-1 bag 80lbs or less) Mini Mix 60
      Stucco (medium batch-2 bag 80lbs) Mortarman 120
      Stucco (large batch 400lbs or more) Workman 250 and 350
      Mortar (small batch 80lbs or less) Mini Mix 60
      Mortar (small batch 160lbs-270lbs) Mortarman 120 or Minuteman
      Mortar (large batch 400lbs-800lbs) Workman 250 or 350

    .

    5993 Imer Wheelman II Gas Concrete Mixer by Imer

    5993 Imer Wheelman II Gas Concrete Mixer
    Check Price for 5993 Imer Wheelman II Gas Concrete Mixer

    IMER Wheelman II Portable Gas Concrete Mixer

  • Free shipping from IMER factory warehouse
  • Easy to clean poly drum.
  • For the 2-3 person construction crew, there is no need to tow a mixer to the job site, not when the Wheelman II can make a wheelbarrow of concrete, mortar, stucco, grout, or dry pack mortar every 4 minutes!

      Speed

    • Mix 275lbs of mortar, stucco, grout and concrete in less than 4 minutes.
    • Gas Power

    • Working on a jobsite without electrical power, no problem, the Wheelman is available with a 3 h.p. Honda engine.
    • Direct drive gearbox – No belts to tighten, no bearings to grease, absolutely the most reliable drive system available today!
    • These mixers truly are Contractor duty!
    • Portablility

    • Easy to move around, construction duty 14″ tires make the Wheelman a breeze to roll around the job site or home
    • In just a minute, the Minuteman or Wheelman can be “knocked down” into 3 easy to load components.
    • All this by one person, with no tools required!
      Project-Mixing Imer Product Application
      Mixing Concrete
      (small batch-250lbs or less)
      Minuteman or Wheelman
      Mixing Concrete
      (large batch 400-800lbs)
      Workman 250 or 350
      Stucco
      (small batch-1 bag 80lbs or less)
      Mini Mix 60
      Stucco
      (medium batch-2 bag 80lbs)
      Mortarman 120
      Stucco
      (large batch 400lbs or more)
      Workman 250 and 350
      Mortar
      (small batch 80lbs or less)
      Mini Mix 60
      Mortar
      (small batch 160lbs-270lbs)
      Mortarman 120 or Minuteman
      Mortar
      (large batch 400lbs-800lbs)
      Workman 250 or 350

    .

    5991 Imer Wheelman II Electric Concrete Mixer by Imer

    5991 Imer Wheelman II Electric Concrete Mixer
    Check Price for 5991 Imer Wheelman II Electric Concrete Mixer

    IMER Wheelman II Portable Concrete Mixer

  • Free shipping from IMER factory warehouse
  • Easy to clean poly drum.
  • For the 2-3 person construction crew, there is no need to tow a mixer to the job site, not when the Wheelman II can make a wheelbarrow of concrete, mortar, stucco, grout, or dry pack mortar every 4 minutes!

      Speed

    • Mix 275lbs of mortar, stucco, grout and concrete in less than 4 minutes.
    • Power

    • The fully enclosed 1/2hp, 110v industrial grade motor with direct gear drive provides non-stop performance on any construction project.
    • Direct drive gearbox – No belts to tighten, no bearings to grease, absolutely the most reliable drive system available today!
    • These mixers truly are Contractor duty!
    • Portablility

    • Easy to move around, construction duty 14″ tires make the Wheelman a breeze to roll around the job site or home
    • In just a minute, the Minuteman or Wheelman can be “knocked down” into 3 easy to load components.
    • All this by one person, with no tools required!
      Project-Mixing Imer Product Application
      Mixing Concrete
      (small batch-250lbs or less)
      Minuteman or Wheelman
      Mixing Concrete
      (large batch 400-800lbs)
      Workman 250 or 350
      Stucco
      (small batch-1 bag 80lbs or less)
      Mini Mix 60
      Stucco
      (medium batch-2 bag 80lbs)
      Mortarman 120
      Stucco
      (large batch 400lbs or more)
      Workman 250 and 350
      Mortar
      (small batch 80lbs or less)
      Mini Mix 60
      Mortar
      (small batch 160lbs-270lbs)
      Mortarman 120 or Minuteman
      Mortar
      (large batch 400lbs-800lbs)
      Workman 250 or 350

    .

    Recent Entries »