Best Door Tools Store

Edco TG-10 10″ Turbo Grinder

Edco	TG-10,11H	TG-10,5B	TG-10,5B	TG-10,11P
Power	Gasoline	Electric	Electric	Propane
Horse Power	11hp	5hp 230 V	5hp 230/460 V	11hp 115 V
Phase	NA	Single	Three	NA
RPM’s	2520	2275	2275	2520
Belts	Std. “V”	Std. “V”	Std. “V”	Std. “V”
Length	43″	43″	43″	43″
Width	21″	21″	21″	21″
Weight	180 lbs	208 lbs	208 lbs	254 lbs

Production Rate:

• 10″ Working width will grind approximately 400-500 square ft per hour at 1/16″ with an Edco diamond disc

Includes:

• 1-10″ diamond disc & standard vacuum port

Rigid Head Assembly Is Ideal For:

• Grinding uneven expansion joints, high spots, joint curls and bridge decks
• Removing coatings
• Grinding rough concrete surfaces

Flex Head Assembly Is Ideal For:

• Preparing a smooth, flat floor to receive a new coating
• Removing coatings
• Grinding rough concrete surfaces
• Grinding surfaces 4 times faster than a traditional floor grinder

EDCO’s TG-10 Turbo Grinder Now: includes a Multi Vac-Port that will fit both 2″ and a 3″ Vacuum Hose!

.

Edco 2EC/2GC Dual-Disc Grinder

EDCO Grinders – Proven in over 40 years of use. Accept no substitute!

Production Rate:

• 22″ Working width will grind approximately 400-500 sq ft per hour at 1/32″ with Edco Dyma-Serts

Includes:

• 2-Multi accessory discs
• Grinder Now Includes a Multi Vac Port that will fit both 2″ and a 3″ Vacuum Hose!
• Water port
• Electric models have a 115/230 voltage selector switch

Features:

• Gas, electric & propane power options available
• Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories
• Counter-rotating discs prevent machine from pulling side to side and give operator greater control
• 6-Grinding insert accessories per loading

Ideal For:

• Large or small areas
• Smoothing concrete in large and small areas
• Light grinding or cleaning of concrete surfaces
• Leveling uneven joints
• Removing mastics, thin-set, high spots, sealers, epoxies and urethanes
• Lightly texturing slippery concrete surfaces
• Length 44.5″, width 27″, Height 44″

.

Edco Four-Disc Grinder

EDCO Grinders – Proven in over 40 years of use. Accept no substitute!

Dimensions:

• Length 49″ x Width 40″

Production Rate:

• 36″ Working width has 4 square feet of surface contact

Includes:

• 4-Multi accessory disc, 3″ vacuum port & water port
• Electric 5 hp 230 Volts Single Phase motor.
• Propane 11 hp 115 Volts starter.

Features:

• Gas, electric or propane power sources available
• Includes 4 multi-accessory discs that accept Dyma-Serts, Strip-Serts and all other grinder accessories
• 4 counter rotating discs are double neoprene mounted for smooth, even action
• Fast controlled grinding for larger areas
• 12-Grinding insert accessories per loading

Ideal For:

• Production grinding and floor cleaning on large surface areas such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas.

.

MK-SDG Features

Free shipping from MK factory warehouse to a commercial address

Free 10″ MK-1010S grinding heads

General Information

• Utilizes 10- or 20 segment 10″ diameter diamond grinding to level, smooth or clean the top surface of concrete slabs
• Provides a smoother finish compared to other methods such as scarifiers or scabblers
• Two-position wheel carriage
• Front taper for enhanced visibility
• Removable nose weight (70 lbs) and handle for easy transportation
• Dust shroud contains grinding debris
• Works on concrete slabs, terrazzo, ceramic tile floors, brick and stone
• Dimensions: 40″ X 16″ X 42″

.

MK-DDG Features

Free shipping from MK factory warehouse to a commercial address

Two free 10″ MK-1010S grinding heads

Standard Features

• Gas Model
• 8.9hp Honda GXV340 Engine
• Dimensions: 53″ X 25″ X 36″
• Electric Model
• 5hp Baldor 220V Motor
• Dimensions: 29″ X 25″ X 40″

General Information

• Uses two 10- or 20 segment 10″-diameter diamond grinding to level, smooth or clean the top surface of concrete slabs
• Provides a smoother finish compared to other methods such as scarifiers or scabblers
• Counter rotating discs provide balanced torque to prevent pulling left or right
• Can also be used to level small areas of uneven joints or high spots of 1/16 to 1/8 inch
• A 22-inch grinding width makes for quick removal
• Wide ergonomically designed T-grip handle for easy handling and maneuvering
• Dust shroud contains grinding debris
• 2″ vacuum port standard for dust-free operation
• Two-position wheel carriage for grinding and easy transport
• Works on concrete slabs, terrazzo, brick and stone and ceramic tile floors

.

Target by Husqvarna Dual Trac Grinder

Two multi-purpose discs make the Dual Trac RG 2112 an extremely versatile machine that can grind, texture or remove many types of materials.

Free shipping from factory warehouse

For Applications Such As

• Grinds surfaces such as concrete, ceramic tile, stone, terrazzo, and brick
• Grinds or cleans concrete surfaces
• Levels uneven joints
• Removes epoxies, high spots, mastics, thin-set and urethanes

Motors/Engines

• Electric – 1.5 hp, 115V Baldor motor. Weighs 310 lbs
• Gas – 8.9 hp GXV340 Honda gas engine. Weighs 325 lbs

Standard Features

• 22″ working width
• Dual 10″ Diamond grinding head.
• Two multi-purpose discs for attaching different surfacing tools (three tools per disc)
• Steel box frame resists bending or cracking
• Isolator design adds stability while grinding with grinding heads
• 3″ diameter vacuum port for a dust-free environment
• Side lift handles for portability
• Single point lifting bail (standard on both models)
• Adjustable handle for operator comfort
• Integrated accessory tray for storage of extra tools and wooden wedges

Optional Features

• Water tank supply kit for dust control
• Weight tray and weights are available for improved grinding
• Need adapter kit item no. 177861 for TDGH Grinding Heads to mount on Dual Trac Grinder.

.